A Hybrid Level Set Optimization Design Method of Functionally Graded Cellular Structures Considering Connectivity

With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown significantly.However,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular structures.The HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure interfaces.Initially,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both sides.Subsequently,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent microstructures.The method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology optimization.In essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.

A Simple Embedding Method for the Laplace-Beltrami Eigenvalue Problem onImplicit Surfaces

We propose a simple embedding method for computing the eigenvalues and eigenfunctions of the Laplace-Beltrami operator on implicit surfaces.The approach follows an embedding approach for solving the surface eikonal equation.We replace the differential operator on the interface with a typical Cartesian differential operator in the surface neighborhood.Our proposed algorithm is easy to implement and efficient.We will give some two-and three-dimensional numerical examples to demonstrate the effectiveness of our proposed approach.

Exponential Time Differencing Method for a Reaction-Diffusion System with Free Boundary

For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.

Topology Optimization for Steady-State Navier-Stokes Flow Based on Parameterized Level Set Based Method

In this paper,we consider solving the topology optimization for steady-state incompressibleNavier-Stokes problems via a new topology optimization method called parameterized level set method,which can maintain a relatively smooth level set function with a local optimality condition.The objective of topology optimization is to􀀀nd an optimal con􀀀guration of theuid and solid materials that minimizes power dissipation under a prescribeduid volume fraction constraint.An arti􀀀cial friction force is added to the Navier-Stokes equations to apply the no-slip boundary condition.Although a great deal of work has been carried out for topology optimization ofuidow in recent years,there are few researches on the topology optimization ofuidow with physical body forces.To simulate theuidow in reality,the constant body force(e.g.,gravity)is considered in this paper.Several 2D numerical examples are presented to discuss the relationships between the proposed method with Reynolds number and initial design,and demonstrate the feasibility and superiority of the proposed method in dealing with unstructuredmesh problems.Three 3D numerical examples demonstrate the proposedmethod is feasible in three-dimensional.

Study on the Method of Setting the Mountain on Fire on the Experimen

ＳｔｕｄｙｏｎｔｈｅＭｅｔｈｏｄｏｆＳｅｔｔｉｎｇｔｈｅＭｏｕｎｔａｉｎｏｎＦｉｒｅｏｎｔｈｅＥｘｐｅｒｉｍｅｎｔａｌＲｈｅｕｍａｔｏｉｄＡｒｔｈｒｉｔｉｓｏｆＲａｂｂｉｔ￥ＺｈｅｎｇＫｕｉｓｈａｎ；Ｚｈｅｎｇｊｕｎｊｉａｎｇ；ＣｈｅｎｇＹｕｅｌａｉ...

A Low Mach Number IMEX Flux Splitting for the Level Set Ghost Fluid Method

Considering droplet phenomena at low Mach numbers,large differences in the magnitude of the occurring characteristic waves are presented.As acoustic phenomena often play a minor role in such applications,classical explicit schemes which resolve these waves suffer from a very restrictive timestep restriction.In this work,a novel scheme based on a specific level set ghost fluid method and an implicit-explicit(IMEX)flux splitting is proposed to overcome this timestep restriction.A fully implicit narrow band around the sharp phase interface is combined with a splitting of the convective and acoustic phenomena away from the interface.In this part of the domain,the IMEX Runge-Kutta time discretization and the high order discontinuous Galerkin spectral element method are applied to achieve high accuracies in the bulk phases.It is shown that for low Mach numbers a significant gain in computational time can be achieved compared to a fully explicit method.Applica-tions to typical droplet dynamic phenomena validate the proposed method and illustrate its capabilities.

Fenlong Cultivation-the Fourth Set of Farming Methods Invented in China

The basic theory and effect of the new farming method of ＂Fenlong＂ cultivation which has been included in the main extension technology of Ministry of Agriculture of the People＇s Republic of China is fully illustrated for the first time, and it is the fourth set （generation） of farming modes and methods following manpower, animal and mechanical （tractor） farming. It follows the natural law to achieve soil activation, water saving, oxygen increase, warming and desalination through the active use of natural resources like soil, rainfall and solar energy, thereby promoting a new round of natural agricultural production and quality improvement and water con- servation, which has crop yield increase by 10%-30%, quality improvement of 5%, natural precipitation retaining increase by100%. The characteristics and mechanism are the use of spiral drill for one-time completion of the land preparation by drilling vertically to 30-50 cm of soil layer through high speed peeling. After instant high temperature and many fierce impacts, mechanical frictions, it could achieve the multiplication of the number of loose soil, soil physical modification and expansion of the soil nutrients, reservoirs, oxygen, microorganisms （＂Four pools＂）. Fenlong cultivation can give birth to new farming culture and civilization, and it can achieve the physical ＂desalinized＂ transformation and utilization of saline soil. The formation of Fenlong green farming technology system makes it possible to invent the farming tools of ＂serf-propelled Fenlong machinery＂ that has got the patent, and it is the method for farmland （dry land, paddy field） Fenlong cultivation, saline-alkali soil smash-ridging cultivation and for the abundance of grass ecology on degraded grassland. The application of Fenlong ＂4＋1＂ （arable, saline-alkali soil, grasslands, Sponge City＋rivers） green development in China can achieve the ＂double safety＂ of food and living space.

A LEVEL SET METHOD FOR STRUCTURAL TOPOLOGY OPTIMIZATION WITH MULTI-CONSTRAINTS AND MULTI-MATERIALS

Combining the vector level set model,the shape sensitivity analysis theory with the gradient projection technique,a level set method for topology optimization with multi-constraints and multi-materials is presented in this paper.The method implicitly describes structural material in- terfaces by the vector level set and achieves the optimal shape and topology through the continuous evolution of the material interfaces in the structure.In order to increase computational efficiency for a fast convergence,an appropriate nonlinear speed mapping is established in the tangential space of the active constraints.Meanwhile,in order to overcome the numerical instability of general topology opti- mization problems,the regularization with the mean curvature flow is utilized to maintain the interface smoothness during the optimization process.The numerical examples demonstrate that the approach possesses a good flexibility in handling topological changes and gives an interface representation in a high fidelity,compared with other methods based on explicit boundary variations in the literature.

Simulation of Non-isothermal Injection Molding for a Non-Newtonian Fluid by Level Set Method

A non-isothermal injection molding process for a non-Newtonian viscous pseudoplastic fluid is simulated.A conservative interface capturing technique and the flow field solving method are coupled to perform a dynamic simulation.The validity of the numerical method is verified by a benchmark problem.The melt interface evolution versus time is captured and the physical quantities such as temperature,velocity and pressure at each time step are obtained with corresponding analysis.A"frozen skin"layer with the thickness increasing versus time during the injection process is found.The fact that the"frozen skin"layer can be reduced by increasing the injection velocity is numerically verified.The fountain flow phenomenon near the melt interface is also captured.Moreover,comparisons with the non-isothermal Newtonian case show that the curvatures of the interface arcs and the pressure contours near the horizontal mid-line of the cavity for the non-Newtonian pseudoplastic case is larger than that for the Newtonian case.The velocity profiles are different at different positions for the non-Newtonian pseudoplastic case,while in the case of Newtonian flow the velocity profiles are parabolic and almost the same at different positions.

Level set method for numerical simulation of a cavitation bubble,its growth, collapse and rebound near a rigid wall

A level set method of non-uniform grids is used to simulate the whole evolution of a cavitation bubble, including its growth, collapse and rebound near a rigid wall. Single-phase Navier-Stokes equation in the liquid region is solved by MAC projection algorithm combined with second-order ENO scheme for the advection terms. The moving inter-face is captured by the level set function, and the interface velocity is resolved by ＂one-side＂ velocity extension from the liquid region to the bubble region, complementing the second-order weighted least squares method across the interface and projection inside bubble. The use of non-uniform grid overcomes the difficulty caused by the large computational domain and very small bubble size. The computation is very stable without suffering from large flow-field gradients, and the results are in good agreements with other studies. The bubble interface kinematics, dynamics and its effect on the wall are highlighted, which shows that the code can effectively capture the ＂shock wave＂-like pressure and velocity at jet impact, toroidal bubble, and complicated pressure structure with peak, plateau and valley in the later stage of bubble oscillating.

A two-dimensional numerical wave flume based on SA-MPLS method

A spatially adaptive (SA) two-dimensional (2-D) numerical wave flume is presented based on the quadtree mesh system,in which a new multiple particle level set (MPLS) method is proposed to solve the problem of interface tracking,in which common intersection may be traversed by multiple interfaces.By using the adaptive mesh technique and the MPLS method,mesh resolution is updated automatically with time according to flow characteristics in the modeling process with higher resolution around the free surface and the solid boundary and lower resolution in less important area.The model has good performance in saving computer memory and CPU time and is validated by computational examples of small amplitude wave,second-order Stokes wave and cnoidal wave.Computational results also indicate that standing wave and wave overtopping are also reasonably simulated by the model.

Numerical simulation of single bubble rising in shear-thinning fluids by level set method

The behavior of single bubble rising in quiescent shear-thinning tlmds was lnvestlgateO numerically by level set metnoa. number of bubbles in a large range of Reynolds number and Eotvos number were investigated including spherical, oblate and spherical. The bubble shape and drag coefficient were compared with experimental results. It is observed that the simulated results show good conformity to experimental results over a wide range of Reynolds number. In addition, the detailed flow field based on the reference coordinate system moving with the bubble is obtained, and the relationship among flow field, bubble shape and velocity is discussed.

Structural Topology Design of Container Ship Based on Knowledge-Based Engineering and Level Set Method

Knowledge-Based Engineering （KBE） is introduced into the ship structural design in this paper. From the implementation of KBE, the design solutions for both Rules Design Method （RDM） and Interpolation Design Method （IDM） are generated. The corresponding Finite Element （FE） models are generated. Topological design of the longitudinal structures is studied where the Gaussian Process （GP） is employed to build the surrogate model for FE analysis. Multi-objective optimization methods inspired by Pareto Front are used to reduce the design tank weight and outer surface area simultaneously. Additionally, an enhanced Level Set Method （LSM） which employs implicit algorithm is applied to the topological design of typical bracket plate which is used extensively in ship structures. Two different sets of boundary conditions are considered. The proposed methods show satisfactory efficiency and accuracy.

LEVEL SET METHOD FOR TOPOLOGICAL OPTIMIZATION APPLYING TO STRUCTURE, MECHANISM AND MATERIAL DESIGNS

Based on a level set model, a topology optimization method has been suggestedrecently. It uses a level set to express the moving structural boundary, which can flexibly handlecomplex topological changes. By combining vector level set models with gradient projectiontechnology, the level set method for topological optimization is extended to a topologicaloptimization problem with multi-constraints, multi-materials and multi-load cases. Meanwhile, anappropriate nonlinear speed, mapping is established in the tangential space of the activeconstraints for a fast convergence. Then the method is applied to structure designs, mechanism andmaterial designs by a number of benchmark examples. Finally, in order to further improvecomputational efficiency and overcome the difficulty that the level set method cannot generate newmaterial interfaces during the optimization process, the topological derivative analysis isincorporated into the level set method for topological optimization, and a topological derivativeand level set algorithm for topological optimization is proposed.

3D Multiphase Piecewise Constant Level Set Method Based on Graph Cut Minimization

Segmentation of three-dimensional(3D) complicated structures is of great importance for many real applications.In this work we combine graph cut minimization method with a variant of the level set idea for 3D segmentation based on the Mumford-Shah model.Compared with the traditional approach for solving the Euler-Lagrange equation we do not need to solve any partial differential equations.Instead,the minimum cut on a special designed graph need to be computed.The method is tested on data with complicated structures.It is rather stable with respect to initial value and the algorithm is nearly parameter free.Experiments show that it can solve large problems much faster than traditional approaches.

Fuzzy pattern recognition method for assessing groundwater vulnerability to pollution in the Zhangji area

Based on the widely used DRASTIC method, a fuzzy pattern recognition and optimization method was proposed and applied to the fissured-karstic aquifer of Zhangji area for assessing groundwater vulnerability to pollution. The result is compared with DRASTIC method. It is shown that by taking the fuzziness into consideration, the fuzzy pattern recognition and optimization method reflects more efficiently the fuzzy nature of the groundwater vulnerability to pollution and is more applicable in reality.

New normalized nonlocal hybrid level set method for image segmentation

This article introduces a new normalized nonlocal hybrid level set method for image segmentation.Due to intensity overlapping,blurred edges with complex backgrounds,simple intensity and texture information,such kind of image segmentation is still a challenging task.The proposed method uses both the region and boundary information to achieve accurate segmentation results.The region information can help to identify rough region of interest and prevent the boundary leakage problem.It makes use of normalized nonlocal comparisons between pairs of patches in each region,and a heuristic intensity model is proposed to suppress irrelevant strong edges and constrain the segmentation.The boundary information can help to detect the precise location of the target object,it makes use of the geodesic active contour model to obtain the target boundary.The corresponding variational segmentation problem is implemented by a level set formulation.We use an internal energy term for geometric active contours to penalize the deviation of the level set function from a signed distance function.At last,experimental results on synthetic images and real images are shown in the paper with promising results.

A Parameter-Free Approach to Determine the Lagrange Multiplier in the Level Set Method by Using the BESO

A parameter-free approach is proposed to determine the Lagrange multiplier for the constraint of material volume in the level set method.It is inspired by the procedure of determining the threshold of sensitivity number in the BESO method.It first computes the difference between the volume of current design and the upper bound of volume.Then,the Lagrange multiplier is regarded as the threshold of sensitivity number to remove the redundant material.Numerical examples proved that this approach is effective to constrain the volume.More importantly,there is no parameter in the proposed approach,which makes it convenient to use.In addition,the convergence is stable,and there is no big oscillation.

Topology and Shape Optimization of 2-D and 3-D Micro-ArchitecturedThermoelastic Metamaterials Using a Parametric Level Set Method

2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method.An asymptotic homogenization approach is employed to obtain the effective thermoelastic properties of the multiphase metamaterials.Theε-constraint multi-objective optimization method is adopted in the formulation.The coefficient of thermal expansion(CTE)and Poisson’s ratio(PR)are chosen as two objective functions,with the CTE optimized and the PR treated as a constraint.The optimization problems are solved by using the method of moving asymptotes.Effective isotropic and anisotropic CTEs and stiffness constants are obtained for the topologically optimized metamaterials with prescribed values of PR under the constraints of specified effective bulk modulus,volume fractions and material symmetry.Two solid materials along with one additional void phase are involved in each of the 2-D and 3-D optimal design examples.The numerical results reveal that the newly proposed approach can integrate shape and topology optimizations and lead to optimal microstructures with distinct topological boundaries.The current method can topologically optimize metamaterials with a positive,negative or zero CTE and a positive,negative or zero Poisson’s ratio.

The shape optimization of the arterial graft design by level set methods

The goal of the arterial graft design problem is to find an optimal graft built on an occluded artery, which can be mathematically modeled by a fluid based shape optimization problem. The smoothness of the graft is one of the important aspects in the arterial graft design problem since it affects the flow of the blood significantly. As an attractive design tool for this problem, level set methods are quite efficient for obtaining better shape of the graft. In this paper, a cubic spline level set method and a radial basis function level set method are designed to solve the arterial graft design problem. In both approaches, the shape of the arterial graft is implicitly tracked by the zero-level contour of a level set function and a high level of smoothness of the graft is achieved. Numerical results show the efficiency of the algorithms in the arterial graft design.