In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existi...In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.展开更多
Wet dual clutch transmissions(W-DCTs) show overall benefits including excellent fuel efficiency,wide torque capacity range,long durability,driving comfort and sportiness.Many breakthroughs have been made to further im...Wet dual clutch transmissions(W-DCTs) show overall benefits including excellent fuel efficiency,wide torque capacity range,long durability,driving comfort and sportiness.Many breakthroughs have been made to further improve the fuel efficiency by design innovations and introductions of new hardware.Each W-DCT has its unique design and hardware.It demands the lubricant to provide excellent wet clutch friction performance and anti-shudder friction durability,good synchronizer friction performance and durability,high load-carrying ability,excellent bearing performance,strong anti-corrosion performance,high thermal and oxidative stability,excellent material compatibility,etc.Particularly,the requirement of the wet clutch friction performance in W-DCT is much more severe than conventional ATFs and CVTFs.We report here our latest W-DCTF technologies developed for different W-DCT applications.DCTF-1 was optimized for a two-sump W-DCT application with the clutch lining material of friction material A(FM-A).DCTF-1 shows high and stable dynamic friction,static friction,particularly,high quasi-static friction without any shudder tendency in GK tests.DCTF-2 was designed for a one-sump W-DCT application with the same clutch lining material of FM-A.DCTF-2 completes 42,000 cycles of the severe GTI chassis dynamometer vehicle test without any issues,which is comparable to the factory fill fluid DCTF-FF.DCTF-3 was developed for a one-sump W-DCT application with a different clutch lining material of FM-B.DCTF-3 shows high and stable dynamic friction in the severe newly developed SAE DCT test procedure.DCTF-3 also gives excellent LVFA durability of over 720 h in the JASO M349 test procedure on FM-B.展开更多
A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were li...A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.展开更多
针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2...针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2DCT换挡过程动力学模型,并分析了换挡过程;然后考虑控制模型的不确定性及未知干扰,将LADRC控制器应用到换挡过程对期望角速度进行跟踪,并采用扩张状态观测器(extended state observer,ESO)对扰动进行实时估计,并加以补偿,最后与PID控制进行对比。仿真和实验结果表明,该控制器跟踪误差更小,鲁棒性强,能保证良好的换挡品质。展开更多
A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet co...A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies.展开更多
在车辆起步过程中,发动机输出转矩波动会导致离合器接合不稳定,从而影响整车动力传动系统的平顺性。双质量飞轮(dual mass flywheel,DMF)可减小发动机转矩波动对离合器及整车动力传动系统的影响。针对起步过程离合器接合不稳定影响整车...在车辆起步过程中,发动机输出转矩波动会导致离合器接合不稳定,从而影响整车动力传动系统的平顺性。双质量飞轮(dual mass flywheel,DMF)可减小发动机转矩波动对离合器及整车动力传动系统的影响。针对起步过程离合器接合不稳定影响整车平顺性的问题,以双离合器自动变速器(dual clutch automatic transmission,DCT)车辆为研究对象,研究了DMF的刚度、阻尼和初级与次级飞轮惯量比对DCT车辆起步过程离合器接合稳定性的影响,并建立了以离合器黏滑比和整车冲击度为目标函数的多目标优化模型,利用遗传算法对模型进行优化,得到了使离合器接合稳定性提高且整车冲击度明显降低的DMF最优参数组合。展开更多
基金Supported by Defense Advanced Research Support Project(62301030303)111 Project(B08043)
文摘In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.
文摘Wet dual clutch transmissions(W-DCTs) show overall benefits including excellent fuel efficiency,wide torque capacity range,long durability,driving comfort and sportiness.Many breakthroughs have been made to further improve the fuel efficiency by design innovations and introductions of new hardware.Each W-DCT has its unique design and hardware.It demands the lubricant to provide excellent wet clutch friction performance and anti-shudder friction durability,good synchronizer friction performance and durability,high load-carrying ability,excellent bearing performance,strong anti-corrosion performance,high thermal and oxidative stability,excellent material compatibility,etc.Particularly,the requirement of the wet clutch friction performance in W-DCT is much more severe than conventional ATFs and CVTFs.We report here our latest W-DCTF technologies developed for different W-DCT applications.DCTF-1 was optimized for a two-sump W-DCT application with the clutch lining material of friction material A(FM-A).DCTF-1 shows high and stable dynamic friction,static friction,particularly,high quasi-static friction without any shudder tendency in GK tests.DCTF-2 was designed for a one-sump W-DCT application with the same clutch lining material of FM-A.DCTF-2 completes 42,000 cycles of the severe GTI chassis dynamometer vehicle test without any issues,which is comparable to the factory fill fluid DCTF-FF.DCTF-3 was developed for a one-sump W-DCT application with a different clutch lining material of FM-B.DCTF-3 shows high and stable dynamic friction in the severe newly developed SAE DCT test procedure.DCTF-3 also gives excellent LVFA durability of over 720 h in the JASO M349 test procedure on FM-B.
基金Science and Technology Commission of Shanghai Municipality,China (No. 08dz1150401)
文摘A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.
文摘针对纯电动汽车两挡双离合自动变速器(two-speed dual-clutch transmission,2DCT)换挡控制模型及参数的不确定性和存在的未知干扰,提出了一种线性自抗扰(linear active disturbance rejection controller,LADRC)换挡控制策略。首先建立2DCT换挡过程动力学模型,并分析了换挡过程;然后考虑控制模型的不确定性及未知干扰,将LADRC控制器应用到换挡过程对期望角速度进行跟踪,并采用扩张状态观测器(extended state observer,ESO)对扰动进行实时估计,并加以补偿,最后与PID控制进行对比。仿真和实验结果表明,该控制器跟踪误差更小,鲁棒性强,能保证良好的换挡品质。
文摘A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies.
