Migration images guided high-resolution velocity modeling based on fully convolutional neural network

Current data-driven deep learning(DL)methods typically reconstruct subsurface velocity models directly from pre-stack seismic records.However,these purely data-driven methods are often less robust and produce results that are less physically interpretative.Here,the authors propose a new method that uses migration images as input,combined with convolutional neural networks to construct high-resolution velocity models.Compared to directly using pre-stack seismic records as input,the nonlinearity between migration images and velocity models is significantly reduced.Additionally,the advantage of using migration images lies in its ability to more comprehensively capture the reflective properties of the subsurface medium,including amplitude and phase information,thereby to provide richer physical information in guiding the reconstruction of the velocity model.This approach not only improves the accuracy and resolution of the reconstructed velocity models,but also enhances the physical interpretability and robustness.Numerical experiments on synthetic data show that the proposed method has superior reconstruction performance and strong generalization capability when dealing with complex geological structures,and shows great potential in providing efficient solutions for the task of reconstructing high-wavenumber components.

Structural similarity of lithospheric velocity models of Chinese mainland

Existing lithospheric velocity models exhibit similar structures typically associated with the first-order tectonic features,with dissimilarities due to different data and methods used in model generation.The quantification of model structural similarity can help in interpreting the geophysical properties of Earth's interior and establishing unified models crucial in natural hazard assessment and resource exploration.Here we employ the complex wavelet structural similarity index measure(CW-SSIM)active in computer image processing to analyze the structural similarity of four lithospheric velocity models of Chinese mainland published in the past decade.We take advantage of this method in its multiscale definition and insensitivity to slight geometrical distortion like translation and scaling,which is particularly crucial in the structural similarity analysis of velocity models accounting for uncertainty and resolution.Our results show that the CW-SSIM values vary in different model pairs,horizontal locations,and depths.While variations in the inter-model CW-SSIM are partly owing to different databases in the model generation,the difference of tomography methods may significantly impact the similar structural features of models,such as the low similarities between the full-wave based FWEA18 and other three models in northeastern China.We finally suggest potential solutions for the next generation of tomographic modeling in different areas according to corresponding structural similarities of existing models.

Modeling of softsphere normal collisions with characteristic of coefficient of restitution dependent on impact velocity

This letter presents a theoretical model of the normal （head-on） collisions between two soft spheres for predicting the experimental characteristic of the coefficient of restitution dependent on impact velocity. After the contact force law between the contacted spheres during a collision is phenomenologically formulated in terms of the compression or overlap displacement under considera- tion of an elastic-plastic loading and a plastic unloading subprocesses, the coefficient of restitution is gained by the dynamic equation of the contact process once an initial impact velocity is input. It is found that the theoretical predictions of the coefficient of restitution varying with the impact velocity are well in agreement with the existing experimental characteristics which are fitted by the explicit formula.

Velocity and Structural Modeling of Mesozoic Chiltan Limestone and Goru Formation for Hydrocarbon Evaluation in the Bitrisim Area, Lower Indus Basin, Pakistan

The present study focuses on building a workflow for structural interpretation and velocity modeling and implementing to Jurassic-Cretaceous succession （Chiltan Limestone and Massive sand of the Lower Goru Formation）. 2D-Migrated seismic sections of the area are used as data set and in order to confirm the presence of hydrocarbons in the study area, P and S-wave seismic velocities are estimated from single-component seismic data. Some specific issues in the use of seismic data for modeling and hydrocarbon evaluation need to deal with including distinguishing the reservoir and cap rocks, and the effects of faults, folds and presence of hydrocarbons on these rocks. This study has carried out the structural interpretation and modeling of the seismic data for the identification of traps. The results demonstrate existence of appropriate structural traps in the form of horst and grabens in the area. 2D and 3D velocity modeling of the horizons indicates the presence of high velocity zones in the eastern half of the study while relatively low velocity zones are encountered in the western half of the area. Two wells were drilled in the study area （i.e. Fateh-01 and Ichhri-01） and both are dry. Immature hydrocarbons migration is considered as a failure reason for Fateh-01 and Ichhri-01 well.

Theoretical modeling of the effects of temperature and moisture content on the acoustic velocity of Pinus resinosa wood

To investigate the effects of temperature and moisture content(MC) on acoustic wave velocity(AWV)in wood,the relationships between wood temperature,MC,and AWV were theoretically analyzed.According to the theoretical propagation characteristics of the acoustic waves in the wood mixture and the differences in velocity among various media(including ice,water,pure wood or oven-dried wood),theoretical relationships of temperature,MC,and AWV were established,assuming that the samples in question were composed of a simple mixture of wood and water or of wood and ice.Using the theoretical model,the phase transition of AWV in green wood near the freezing point(as derived from previous experimental results) was plausibly described.By comparative analysis between theoretical and experimental models for American red pine(Pinus resinosa) samples,it was established that the theoretically predicted AWV values matched the experiment results when the temperature of the wood was below the freezing point of water,with an averageprediction error of 1.66%.The theoretically predicted AWV increased quickly in green wood as temperature decreased and changed suddenly near 0 °C,consistent with the experimental observations.The prediction error of the model was relatively large when the temperature of the wood was above the freezing point,probably due to an overestimation of the effect of the liquid water content on the acoustic velocity and the limited variables of the model.The high correlation between the predicted and measured acoustic velocity values in frozen wood samples revealed the mechanisms of temperature,MC,and water status and how these affected the wood(particularly its acoustic velocity below freezing point of water).This result also verified the reliability of a previous experimental model used to adjust for the effect of temperature during field testing of trees.

Modeling of the Changes in Flow Velocity on Seawalls under Different Conditions Using FLOW-3D Software

Seawalls are among protective structures that are constructed for decreasing the level of wave force and/or protecting from other structures. In this regard, more accurate investigation of these structures takes great importance from different perspectives. This research investigates the change of the velocity on seawall crown by considering the obstacles in different layouts and slopes. FLOW-3D has been used in this research for modeling. The results of the modeling show that the existence of obstacles has a determinative role in decreasing flow rate in the crown of seawalls. Also, as it was expected, the slope factor on upstream seawalls is very determinative in decreasing this rate such that the lowest velocity on the wall occurs in D-state layout and the slope of 45°.

Problems and Solutions of Velocity Modeling in Natural Gas Exploration

Recently, velocity prediction and modeling have been focus of the geophysical exploration in the high temperature and high pressure of the south China sea area, especially for new offshore exploratory areas. The error is large with great difficulty owing to fewer exploratory wells and misunderstanding. Firstly, on the basis of three typical velocity prediction and modeling examples in Ying-Qiong basin, it’s easy to put forward the corresponding not common but urgent problem in each instance, then combined with the velocity problem and misunderstanding to expand method discussion and solution, which include geological model to guide the velocity interpretation and analysis, the establishment of forward velocity of the auxiliary model explaining and constructing high precision velocity model. This research basically solves existing velocity problems in gas exploration of south China sea in recent years, and proposes corresponding solution and application, which is of great significance to the further exploration and productive practice.

Migration velocity modeling based on common reflection surface gather

The common-reflection-surface (CRS) stacking is a new seismic imaging method, which only depends on seismic three parameters and near-surface velocity instead of macro-velocity model. According to optimized three parameters obtained by CRS stacking, we derived an analytical relationship between three parameters and migration velocity field, and put forward CRS gather migration velocity modeling method, which realize velocity estimation by optimizing three parameters in CRS gather. The test of a sag model proved that this method is more effective and adaptable for velocity modeling of a complex geological body, and the accuracy of velocity analysis depends on the precision of optimized three parameters.

A DAMAGE ACCUMULATING MODELING OF FAILURE WAVES IN GLASS UNDER HIGH VELOCITY IMPACT

The failure wave phenomenon was interpreted in glass media under the high velocity impact with the stress levels below the Hugoniot elastic limit. In view of the plate impact experimental observations a damage-accumulating model predominated by the deviatoric stress impulse was proposed while Heaviside function was adopted in the damage-accumulating model to describe the failure delay in the interior of Materials. Features of the failure layer and propagation mechanism as well as their dynamic characteristics were further presented. The reduction in failure wave propagation speed is pointed out as the reflected rarefaction waves reflect again from the failure layer boundary.

Modeling continuous traffic flow with the average velocity effect of multiple vehicles ahead on gyroidal roads

In the future connected vehicle environment,the information of multiple vehicles ahead can be readily collected in real-time,such as the velocity or headway,which provides more opportunities for information exchange and cooperative control.Meanwhile,gyroidal roads are one of the fundamental road patterns prevalent in mountainous areas.To effectively control the system,it is therefore significant to explore the evolution mechanism of traffic flow on gyroidal roads under a connected vehicle environment.In this paper,we present a new continuum model with the average velocity of multiple vehicles ahead on gyroidal roads.The stability criterion and KdV-Burger equation are deduced via linear and nonlinear stability analysis,respectively.Solving the above KdV-Burger equation yields the density wave solution,which explores the formation and propagation property of traffic jams near the neutral stability curve.Simulation examples verify that the model can reproduce complex phenomena,such as shock waves and rarefaction waves.The analysis of the local cluster effect shows that the number of vehicles ahead and the radius information,and the slope information of gyroidal roads can exert a great influence on traffic jams.The effect of the first and second terms are positive,while the last term is negative.

Near-surface velocity model construction based on a Monte-Carlo scheme

In tomographic statics seismic data processing, it 1s crucial to cletermme an optimum base for a near-surface model. In this paper, we consider near-surface model base determination as a global optimum problem. Given information from uphole shooting and the first-arrival times from a surface seismic survey, we present a near-surface velocity model construction method based on a Monte-Carlo sampling scheme using a layered equivalent medium assumption. Compared with traditional least-squares first-arrival tomography, this scheme can delineate a clearer, weathering-layer base, resulting in a better implementation of damming correction. Examples using synthetic and field data are used to demonstrate the effectiveness of the proposed scheme.

Submerged flexible vegetation impact on open channel flow velocity distribution: An analytical modelling study on drag and friction

In this paper,an analytical model that represents the streamwise velocity distribution for open channel flow with submerged flexible vegetation is studied.In the present vegetated flow modelling,the whole flow field has been separated into two layers vertically: a vegetated layer and a non-vegetated free-water layer.Within the vegetated layer,an analysis of the mechanisms affecting water flow through flexible vegetation has been conducted.In the non-vegetated layer,a modified log-law equation that represents the velocity profile varying with vegetation height has been investigated.Based on the studied analytical model,a sensitivity analysis has been conducted to assess the influences of the drag (CD) and friction (Cf ) coefficients on the flow velocity.The investigated ranges of CD and Cf have also been compared to published values.The findings suggest that the CD and Cf values are non-constant at different depths and vegetation densities,unlike the constant values commonly suggested in literature.This phenomenon is particularly clear for flows with flexible vegetation,which is characterised by large deflection.

Which velocity model is more suitable for the 2017 M_S7.0 Jiuzhaigou earthquake?

On Aug.8, 2017, an M_S 7.0 earthquake struck Jiuzhaigou, a county of Sichuan province, China. A number of investigations and studies have been conducted, some of which involved local velocity models. However, the suitability of these models has not been properly addressed. Here we collect 11 already-existing models, including those used in studies of the 2017 M_S 7.0 Jiuzhaigou earthquake,choose 10 local stations surrounding the earthquake, and employ the same technique(TRIT) to relocate the hypocenter. And furthermore, we choose a more suitable model from the 11 already-existed models by analyzing the relocation process and the relocated results for reasonability. Finally, our conclusion is that the model Fang 2018 is more suitable and the hypocenter parameters, 103.801°E,33.192°N and 15.8 km for longitude, latitude and depth, respectively, and 2017-08-08 13:19:46.66 for its origin time, based on this model should be recommended for the 2017 M_S7.0 Jiuzhaigou earthquake.

Effect of Relative Velocity on the Optimal Velocity Model

In this letter, an improved optimal velocity model was proposed that assumes the effect of relative velocity deceases with the increment of gap between successive cars. Numerical simuation was carried out to test whether this model could depict the braking process correctly. The simuation results show good agreement with observed data.

Simple analytical model for depth-averaged velocity in meandering compound channels

A simple but applicable analytical model is presented to predict the lat- eral distribution of the depth-averaged velocity in meandering compound channels. The governing equation with curvilinear coordinates is derived from the momentum equation and the flow continuity equation under the condition of quasi-uniform flow. A series of experiments are conducted in a large-scale meandering compound channel. Based on the experimental data, a magnitude analysis is carried out for the governing equation, and two lower-order shear stress terms are ignored. Four groups of experimental data from different sources are used to verify the predictive capability of this model, and good predictions are obtained. Finally, the determination of the velocity parameter and the limitation of this model are discussed.

Model for seawater fouling and effects of temperature,flow velocity and surface free energy on seawater fouling

A kinetic model was proposed to predict the seawater fouling process in the seawater heat exchangers.The new model adopted an expression combining depositional and removal behaviors for seawater fouling based on the Kern–Seaton model.The present model parameters include the integrated kinetic rate of deposition(k d)and the integrated kinetic rate of removal(k r),which have clear physical signi ficance.A seawater-fouling monitoring device was established to validate the model.The experimental data were well fitted to the model,and the parameters were obtained in different conditions.SEM and EDX analyses were performed after the experiments,and the results show that the main components of seawater fouling are magnesium hydroxide and aluminum hydroxide.The effects of surface temperature,flow velocity and surface free energy were assessed by the model and the experimental data.The results indicate that the seawater fouling becomes aggravated as the surface temperature increased in a certain range,and the seawater fouling resistance reduced as the flow velocity of seawater increased.Furthermore,the effect of the surface free energy of metals was analyzed,showing that the lower surface free energy mitigates the seawater fouling accumulation.

Improvements in seismic event locations in a deep western U.S. coal mine using tomographic velocity models and an evolutionary search algorithm

Methods of improving seismic event locations were investigated as part of a research study aimed at reducing ground control safety hazards. Seismic event waveforms collected with a 23-station three-dimensional sensor array during longwall coal mining provide the data set used in the analyses. A spatially variable seismic velocity model is constructed using seismic event sources in a passive tomographic method. The resulting three-dimensional velocity model is used to relocate seismic event positions. An evolutionary optimization algorithm is implemented and used in both the velocity model development and in seeking improved event location solutions. Results obtained using the different velocity models are compared. The combination of the tomographic velocity model development and evolutionary search algorithm provides improvement to the event locations.

A Kinematic Thermal Model for Descending Slabs with Velocity Boundary Layers:A Case Study for the Tonga Subducting Slab

For the purpose of investigating the influence of metastable olivine（MO） phase transformations on both deep seismicity and stagnation of slabs,we constructed a 2-dimensional finite element thermal model for a 120 Ma-old 50°dipping oceanic lithosphere descending at 10 cm/yr with velocity boundary layers,which would mitigate the interference of constant velocity field for the slab. The resulting temperatures show that most of intermediate and deep earthquakes occurring within the Tonga slab are occurring inside the 800℃and 1200℃isotherm,respectively.The elevation of olivine transformation near～410 km and respective persistence of metastable olivine and spinel within the transition zone and beneath 660 km would thus result in bimodal positive,zonal,negative density anomalies,respectively.These results together with the resulting pressure anomalies may reflect the stress pattern of the Tonga slab：（i） slab pull force exerts above a depth of～230 km;（ii） MO existence changes the buoyancy force within the transition zone and facilitates slab stagnation at a depth of 660 km;（iii） as the subducting materials accumulated over 660 km,deepest earthquakes occur due to MO transformation;（iv） a flattened‘slab’ may penetrate into the lower mantle due to the density increment of Sp transformation.

Effects of the Reynolds number on a scale-similarity model of Lagrangian velocity correlations in isotropic turbulent flows

A scale-similarity model of a two-point two-time Lagrangian velocity correlation(LVC) was originally developed for the relative dispersion of tracer particles in isotropic turbulent flows(HE, G. W., JIN, G. D., and ZHAO, X. Scale-similarity model for Lagrangian velocity correlations in isotropic and stationary turbulence. Physical Review E, 80, 066313(2009)). The model can be expressed as a two-point Eulerian space correlation and the dispersion velocity V. The dispersion velocity denotes the rate at which one moving particle departs from another fixed particle. This paper numerically validates the robustness of the scale-similarity model at high Taylor micro-scale Reynolds numbers up to 373, which are much higher than the original values(R_λ = 66, 102). The effect of the Reynolds number on the dispersion velocity in the scale-similarity model is carefully investigated. The results show that the scale-similarity model is more accurate at higher Reynolds numbers because the two-point Lagrangian velocity correlations with different initial spatial separations collapse into a universal form compared with a combination of the initial separation and the temporal separation via the dispersion velocity.Moreover, the dispersion velocity V normalized by the Kolmogorov velocity V_η ≡ η/τ_η in which η and τ_η are the Kolmogorov space and time scales, respectively, scales with the Reynolds number R_λ as V/V_η ∝ R_λ^(1.39) obtained from the numerical data.

An improved multidirectional velocity model for micro-seismic monitoring in rock engineering

An improved multidirectional velocity model was proposed for more accurately locating micro-seismic events in rock engineering. It was assumed that the stress wave propagation velocities from a micro-seismic source to three nearest monitoring sensors in a sensor's array arrangement were the same. Since the defined objective function does not require pre-measurement of the stress wave propagation velocity in the field, errors from the velocity measurement can be avoided in comparison to three traditional velocity models. By analyzing 24 different cases, the proposed multidirectional velocity model iterated by the Simplex method is found to be the best option no matter the source is within the region of the sensor's array or not. The proposed model and the adopted iterative algorithm are verified by field data and it is concluded that it can significantly reduce the error of the estimated source location.