A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measureme...A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.展开更多
Cascading stages of seeded free electron lasers（FELs） is a promising way to produce fully coherent X-ray radiation. We study a new approach to produce coherent hard X-rays by cascading the recently proposed phasemer...Cascading stages of seeded free electron lasers（FELs） is a promising way to produce fully coherent X-ray radiation. We study a new approach to produce coherent hard X-rays by cascading the recently proposed phasemerging enhanced harmonic generation（PEHG） The scheme consists of one dogleg and two PEHG configurations,and may be one of the leading candidates for the extracted undulator branch in future X-ray FEL facilities. FEL physics studies show that such a scheme is feasible within the present technology and can provide high brightness Xray radiation pulses with narrow bandwidth and full coherence The radiated peak power at 1 ？A wavelength converted from an initial 200 nm seed laser is over 2 GW展开更多
在建的上海硬X射线自由电子激光装置(Shanghai HIgh repetition rate XFEL aNd Extreme light facility,SHINE)的加速器隧道内,采用束流刮束器刮掉束晕外围张角比较大的电子,刮束器的束流损失率为0.1‰。本文采用蒙特卡洛程序FLUKA,用SO...在建的上海硬X射线自由电子激光装置(Shanghai HIgh repetition rate XFEL aNd Extreme light facility,SHINE)的加速器隧道内,采用束流刮束器刮掉束晕外围张角比较大的电子,刮束器的束流损失率为0.1‰。本文采用蒙特卡洛程序FLUKA,用SOURCE程序实现电子束在3σbeam外的高斯分布,以尽量真实模拟电子在束流刮束器处的丢失情况,解决了低功率刮束情况下蒙特卡洛模拟无统计性结果的难题。利用束流环形高斯模型对刮束器的活化进行了分析,结果表明环形高斯模型可以更真实地再现电子在束流刮束器的丢失情况;5年运行后距刮束器30 cm处的剩余剂量率达到了数百μSv/h至数mSv/h,和国外类似装置计算结果相当;通过对放射性核素的种类分析,结果证明刮束器(钨)的放射性废物处置难度不大。展开更多
基金supported by the National Key R&D Plan(No.2016YFA0401900)
文摘A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.
基金Supported by the National Natural Science Foundation of China(21127902&11322550)Ten Thousand Talent Program
文摘Cascading stages of seeded free electron lasers（FELs） is a promising way to produce fully coherent X-ray radiation. We study a new approach to produce coherent hard X-rays by cascading the recently proposed phasemerging enhanced harmonic generation（PEHG） The scheme consists of one dogleg and two PEHG configurations,and may be one of the leading candidates for the extracted undulator branch in future X-ray FEL facilities. FEL physics studies show that such a scheme is feasible within the present technology and can provide high brightness Xray radiation pulses with narrow bandwidth and full coherence The radiated peak power at 1 ？A wavelength converted from an initial 200 nm seed laser is over 2 GW
文摘在建的上海硬X射线自由电子激光装置(Shanghai HIgh repetition rate XFEL aNd Extreme light facility,SHINE)的加速器隧道内,采用束流刮束器刮掉束晕外围张角比较大的电子,刮束器的束流损失率为0.1‰。本文采用蒙特卡洛程序FLUKA,用SOURCE程序实现电子束在3σbeam外的高斯分布,以尽量真实模拟电子在束流刮束器处的丢失情况,解决了低功率刮束情况下蒙特卡洛模拟无统计性结果的难题。利用束流环形高斯模型对刮束器的活化进行了分析,结果表明环形高斯模型可以更真实地再现电子在束流刮束器的丢失情况;5年运行后距刮束器30 cm处的剩余剂量率达到了数百μSv/h至数mSv/h,和国外类似装置计算结果相当;通过对放射性核素的种类分析,结果证明刮束器(钨)的放射性废物处置难度不大。
