Structural,^(40)Ar/^(39)Ar Geochronological and Rheological Feature Analysis of the Guoxuepu Shear Zone:Indications for the Jitang Metamorphic Complex in the Northern Lancangjiang Zone

The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.

Deformation characteristics of granitic rocks in Erguna ductile shear zone,NE China

The Erguna ductile shear zone is situated in the Erguna Massif,which has been exposed along the eastern bank of the Erguna River in northeastern China.The authors present comprehensive study results on the macro-and micro-structures,finite strain and kinematic vorticity,quartz electron backscatter diffraction(EBSD)fabrics,and geochronology of granitic rocks in the Erguna ductile shear zone.The deformed granitic rocks have experienced significant SE-trending dextral strike-slip shearing.Finite strain and kinematic vorticity in all deformed granitic rocks indicate that the deformation is characterized by simple sheardominated general shearing with S-L tectonites.Mineral deformation behaviors and quartz C-axis textures demonstrate that the deformed granitic rocks developed under greenschist to amphibolite facies conditions at deformation temperatures ranging from 450 to 550℃.New LA-ICP-MS zircon U-Pb ages indicate that these granitic rocks were formed in Early Triassic(~248.6 Ma)and Early Cretaceous(~136.7 Ma).All the evidence indicates that this deformation may have occurred in Early Cretaceous and was related to the compression resulting from the final closure of the Mongol-Okhotsk Ocean.

Petrology, Age and Geodynamic Implication of the Panafrican Granitoids Associated with the Glito-Kpatala Shear Zone (South-East Togo)

The granitic plutons associated with the Glito-Kpatala shear zone are composed of biotite and amphibole granodiorites, biotite granites, two-mica granites and aplitic granites, which are very poorly represented. The chemical and mineralogical compositions of these facies indicate that they are I type and belong to high-K calc-alkaline series, with a chemical metaluminous character displayed by the granodiorites relative to the biotite and two-mica facies whose chemical compositions vary between metaluminous and peraluminous caracter. The Th/Ta (14.04 - 43.82 ppm, mean = 26.05), Th/U (2.58 to 15.05 ppm, mean = 5.85 ppm), Zr/Hf (25.27 to 37.21, mean = 30.67 ppm) and Rb/Sr (0.16 to 4.32;mean = 1.67 ppm) ratios of these granitoids reveal a strong crustal involvement in their magmatogenesis. Variations in CaO/Na2O (0.47 - 1.44 ppm), Rb/Sr (0.14 - 0.27 ppm), Rb/Ba (0.07 - 0.14 ppm) and Sr/Y (38.21 - 174.42 ppm) ratios indicate that biotite and amphibole granodiorites with their excessive Ni (135.37 - 139.51 ppm) and Cr (395.73 - 447.74 ppm) were derived from a mafic to intermediate lower continental crust where garnet and/or amphibole were stable residual assemblage minerals. The moderate Sr/Y ratios (1.81 - 9.47 ppm) and low transition elements Ni (1 - 6.44 ppm) and Cr (7.89 - 13.47 ppm) contents in both the two-mica and biotite granites are consistent with their emplacement at relatively shallow depths in the upper to mean continental crust, at pressures below 10 Kbar. In the two-mica granites, moderate CaO/Na2O (0.20 - 0.57 ppm, mean = 0.38 ppm) and Rb/Ba (0.39 - 1.37, mean = 0.84 ppm) ratios and quite varied Rb/Sr (1.53 - 4.23 ppm, mean = 2.85 ppm) ratios indicate a predominant derivation from psammitic and pelitic metasediments rather than metagreywackes. These low ratios (0.25 ≤ CaO/Na2O ≤ 0.32, mean = 0.28 ppm;0.31 ≤ Rb/Ba ≤ 0.44, mean = 0.39 ppm;1.11 ≤ Rb/Sr ≤ 1.78, mean = 0.39 ppm) in biotite granites are more consistent with melting from a metagreywacke-derived source. Evidence for the contribution of mantle-derived mafic magma with granitic magma in the plutons studied is materialized by the presence of magmatic enclaves in both granodiorites and two-mica granites, the volcanic arc geochemical signatures displayed by the plutons in geotectonic diagrams and Nb/Ta ratios (14.14 - 34.61 ppm) closer to mantle estimates. Geochemical data and radiometric dating elements suggest that the granitoids studied can be integrated into the pan-African late magmatic episode, which corresponds between 606 and 583 Ma, to the activity of transcurrent ductile strike-slips and to the synchronous emplacement of high K calc-alkaline plutons in a post-collisional context.

Characterizing large-scale weak interlayer shear zones using conditional random field theory

The shear behavior of large-scale weak intercalation shear zones(WISZs)often governs the stability of foundations,rock slopes,and underground structures.However,due to their wide distribution,undulating morphology,complex fabrics,and varying degrees of contact states,characterizing the shear behavior of natural and complex large-scale WISZs precisely is challenging.This study proposes an analytical method to address this issue,based on geological fieldwork and relevant experimental results.The analytical method utilizes the random field theory and Kriging interpolation technique to simplify the spatial uncertainties of the structural and fabric features for WISZs into the spatial correlation and variability of their mechanical parameters.The Kriging conditional random field of the friction angle of WISZs is embedded in the discrete element software 3DEC,enabling activation analysis of WISZ C2 in the underground caverns of the Baihetan hydropower station.The results indicate that the activation scope of WISZ C2 induced by the excavation of underground caverns is approximately 0.5e1 times the main powerhouse span,showing local activation.Furthermore,the overall safety factor of WISZ C2 follows a normal distribution with an average value of 3.697.

Structural and Geochronological Evidence for Multiple Episodes of Tertiary Deformation along the Ailaoshan-Red River Shear Zone, Southeastern Asia, Since the Paleocene

Structural analyses show that the Ailaoshan-Red River shear zone （ASRRSZ） in Ailao Mountain is composed of three different deformational domains. These domains may represent three episodes of left-lateral slip experienced by the ASRRSZ. The first episode of such deformation occurred throughout the eastern high-grade belt of the ASRRSZ under a transtensional regime and produced L- type tectonites of amphibolite grade. The second episode of left-lateral slip formed high strain zones overprinting the high-grade belt. Its deformational mechanism is similar to simple shear and the deformed rocks are L-S mylonites of greenschist grade. The third episode of left-lateral slip took place chiefly in a western low-grade belt of the ASRRSZ. This deformation occurred in a transpressional regime, formed an overall structure pattern of a sinistral thrust system and produced phyllonites of low-greenschist grade. Geochronological data indicated that the three episodes of left-lateral slip happened before ～58-56 Ma, at least from ～27 Ma to 22 Ma and at ～13-12 Ma respectively. The first episode of slip in the ASRRSZ appeared to correspond to the initial collision of India and Asia at ～60 Ma. The second episode took place almost at the same time as the most intensive compression and uplift in Tibet. The latest event might represent a further eastward material flow in Tibet after ～16-13 Ma. Thus, the ASRRSZ of southeastern Asia probably experienced three main episodes of Tertiary left- lateral slip in the course of intracontinental convergence since the India-Asia collision.

High Temperature Strain Structures and Quartz C-Axis Fabrics from Mylonitic Rocks in the Ailaoshan-Red River Shear Zone,Yunnan,and Their Tectonic Implication

The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.

New Zircon U-Pb Geochronology of the Post-kinematic Granitic Plutons in the Diancang Shan Metamorphic Massif along the Ailao Shan-Red River Shear Zone and Its Geological Implications

The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan（DCS） high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River（ASRR） shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.

Structures of Syn-deformational Granites in the Longquanguan Shear Zone and Their Monazite Electronic Microprobe Dating

The Longquanguan shear zone is an important structural belt in the North China Craton, separating the underlying Fuping complex from the overlying Wutai complex. This shear zone has experienced three episodes of deformation: the first and main episode is a ductile top-to-ESE shear along the gently northwest-west dipping foliations, while the other two episodes are later collapse sliding. Prolonged granites parallel to the shear foliations make one of the main compositions of the Longquanguan shear zone. These granites experienced deformation to form mylonitic rocks when they emplaced during the first episode of deformation. Structural characters of the granites and their contacts to the country rocks indicate that these granites possibly resulted from in-situ partial remelting by shearing, i.e., they are syn-deformational granites. Monazites in these mylonitic granites are magmatic minerals and their crystallization ages may represent ages of the magmatic events, and also the ages for the main deformation of the Longquanguan shear zone. Monazite electronic microprobe dating were carried on two samples of granite, which gives multiple peak ages, among which 1,846 Ma and 1,877 Ma are the main peak ages for the two samples. These ages represent the main deformation of the Longquanguan shear zone, which is consistent with the main regional geological event at about 1,850 Ma caused by the collision between the Eastern and Western Blocks in North China. The good match between the monazite ages and the corresponding regional tectono-thermal events shows the feasibility and reliability of monazite electronic microprobe dating.

A Large Ductile Sinistral Strike-Slip Shear Zone and Its Movement Timing in the South Qilian Mountains, Western China

There is a large ductile shear zone, 2 km wide and more than 350 km long, inthe South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareousmylonites. The microstructures of the ductile shear zone show nearly E-W extending subverticalfoliation, horizontal and oblique stretching lineations, shearing sense from sinistral to obliquesinistral strike-slip from east to west, 'A' type folds and abundant granitic veins. Measuredlattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the graniticmylonite in the west segment suggest a strong LPO characterized by the dominant slip systems (1010) formed at high temperature (>650 deg C). K-feldspar of the mylonite shows an ^(39)Ar/^(40)Arhigh-temperature plateau age of 243.3 +- 1.3 Ma, and biotite, 250.5 +- 0.5 Ma, which represent theformation age of the ductile shear zone. The ^(39)Ar/^(40)Ar plateau ages of 169.7 +- 0.3 Ma and160.6 +- 0.1 Ma and the ^(39)Ar/^(40)Ar isochron ages of 166.99 +- 2.37 Ma and 160.6 +- 0.1 Ma ofbiotites in the mylonite represent the subsequent deformation age. These ages indicate that thisductile shear zone is similar to the Altun and South Kunlun sinistral ductile shear zones in itsages of movement, formation, reactivation and duration.

Fluid-Rock Interaction of Shear Zones in Continental Crust:as Evidenced by Xincheng-Xishui and Hetai Shear Zones

There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng - Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies environment. The representative mylonite zones of the shear zones are studied with whole rock major and trace element analyses. The chemical compositional variation tendencies in both shear zones are very similar and the gain - loss ratios of various components in the mylonitic rocks are reflected in the mass balance equations. The enrichment of those immobile high - field- strengh elements is considered to be related to the volume loss of the mylonitic rocks in a shear zone. Based on the volume loss expression Cs /Co = 1/(1- V), the fractional volume losses (V) are 37.5% and 36.5%-42.3% respectively for mylonites and ultramylonites in the Xincheng-Xishui shear zone and 11 % and 28% respectively for mylonites and phyllonites in the Hetai shear zone. The high volume loss and large removal of SiO2 from the system imply that there is a large amount of percolating fluids in the shear zones. From the SiO2 loss, the fluid/rock ratios (N) are calculated as Nmyl = 113 - 563, Nultramyl= 133-664 for the Xincheng-Xishui shear zone and Nmyl=42-208, Nphyl=110-550 for the Hetai shear zone. Such a large amount of percolating fluid must have profoundly affected the rheological behavior, chemical behavior and metallogenesis of the shear zones.

Timing of the Early Paleozoic Yangtze and Cathysian Convergence： Constraint from U-Pb Geochronology of Hydrothermal Zircons from Mafic Mylonite within the Shoucheng-Piaoli Ductile Shear Zone, Northern Guangxi

Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi （Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015）.

A Uniform Orogen-parallel Extension System of the Shear Zones in the Tongbai-Dabie Orogenic Belt, Central China

Large-scale magmatism affected the Tongbai-Dabie orogenic belt during post-collisional lateral tectonic extension in the Cretaceous, which was suggested to account for the widespread deformation and migmatization in the Tongbai-Dabie complexes. However, it cannot explain the most deformations in the shear zones. The northwest-southeast shear zones are developed around or wrapped the Tongbai-Dabie complexes. They play an important role for the interpretation of the tectonic evolution of the Tongbai-Dabie orogenic belt. By a systematically observation and description of the geometry and kinematics of these shear zones, we found that the shear zones to the north dip NE and have a uniform sinistral shear sense, the shear zone to the south dips SW and has a uniform dextral shear sense, and the shear zones at the core are sub-horizontal and have a uniform top-to-NW sense of shear. Combining with the comparison of previous and our geochronological studies, we interpret these associations as indicating that these shear zones were originally a single, more flat-lying and sub- horizontal shear zone with a uniform top-to-NW shear sense before the folding-doming of the Tongbai- Dabie complexes and suggest that the Tongbai-Dabie orogenic belt experienced a uniform top-to-NW orogen-paraUel extension in the ductile lithosphere before the widespread magmatism in the Cretaceous.

Analysis of the Ore-Controlling Structure of Ductile Shear Zone Type Gold Deposit in Southern Beishan Area, Gansu, Northwest China

The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.

Transportation of REE in the Ductile Shear Zone in Hetai Gold Deposit, Guangdong Province

The REE transportation in two sorts of mylonites of ductile shear zone, in Hetai gold deposit, Guangdong province was studied. The results show that there is REE compositional variation regularly in the ductile shear zone. When mica-quartz schist and migmatite are changing into mylonites or ultramylonites, i.e., along with intensifying deformation, the contents of each rare earth element and the total contents of the LREE, HREE and REE increase or decrease regularly, but the REE patterns of the rock are accordant. The isocon diagram of the tectonic rocks before and after deformation shows that the REE compositional variation of the mylonites or ultramylonites are very small, but there is a few REE moving in or out in the rock deformation. The reason of the REE compositional variation is that there are volume change and fluid flow in the rock deformation, and it leads to the LREE relative enrichment and HREE relative loss.

Structural,Kinematic and Geochronological Study of the Main Tianshan Shear Zone in the Borohoro Ranges,NW China

The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliations,subhorizontal lineations,and dextral kinematics.The microstructures and CPO patterns of calcite and quartz in the tectonites suggest shearing at temperatures of 200℃ to 500℃ or above.The amount of dextral displacement along the zones is less than 100 km.LA-ICP-MS U-Pb dating of zircons from some pre-kinematic granites gave ages of 364-325 Ma and 316 Ma,and zircons from a syn-kinematic leucogranite gave an age of 291 Ma.We propose that dextral shearing along the MTSZ started in the earliest Permian.Our data indicate that collision between the Yili and Junggar plates might have finished before 325 Ma or 316 Ma,with a tectonic transformation from 325 Ma to 300 Ma,resulting in intracontinental transpression from 300 Ma or 291 Ma.We suggest that the formation of the Kazakhstan orocline(KO)took place in two stages,with the early stage of bending driven by convergence related to oblique subduction,and the late stage possibly associated with lateral disarticulation as a result of the dextral strike-slip shear zones.

Tectonic Dynamic Metallization of Silver-GoldHydrothermal Fluids in Proterozoic GneissTerrene Shear Zones, Suichang, Zhejiang, China

The Suichang mine is the largest silicified vein-type silver-gold mineralization system in Southeast China, whose ore bodies are controlled by shear zones developing in Lower Proterozoic gneiss terrene with initial migmatization, which is covered by Upper Jurassic and Lower Cretaceous volcanic rock system and cut by acidic igneous veins of Jurassic and Cretaceous. The conclusions are as follows: (1) The ore-forming fluid is defined as superhigh tectonic-metamorphic fluid on the base of : 1 (D)-(18O) values 2 fluid inclusions;3 trace elements of pyrite from ores. (2) The shear zone silicified orebod-ies occurred in proterozoic, Jurassic and Cretaceous, which have been transforms in part by ore-bearing comb quartz vein of volcanism.

Characteristics of Compositional Migration in Mylonites from the Ductile Shear Zones of the Southern Tancheng-Lujiang Fault Belt, Eastern Anhui Province

On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.

The Geological Significance of the Deformation and Geochronology of the Xiaotian–Mozitan Shear Zone in the Dabie Orogenic Belt(East-Central China)

The Xiaotian–Mozitan Shear Zone(XMSZ)is the boundary of the Dabie High-grade Metamorphic Complex(DHMC)and the North Huaiyang Tectonic Belt.It was deformed in ductile conditions with a top-to-NW/WNW movement.Geothermometers applied to mineral parageneses in mylonites of the shear zone give a temperature range of 623–691°C for the predeformation and 515–568°C for the syndeformation,respectively,which indicates a retrograde process of evolution.A few groups of zircon U-Pb ages were obtained from undeformed granitic veins and different types of deformed rocks in the zone.Zircons from the felsic ultramylonites are all magmatic,producing a weighted mean 206Pb/238U age of 754±8.1 Ma,which indicates the time of magmatic activities caused by rifting in the Neoproterozoic.Zircons from the granitic veins,cutting into the mylonites,are also of magmatic origin,producing a weighted mean 206 Pb/238 U age of 130±2.5 Ma,which represents the time of regional magmatic activity in the Cretaceous.Zircons from the mylonitic gneisses are of anatectic-metamorphic origins and are characterized by a core-mantle interior texture,which yielded several populations of ages including the Neoproterozoic ages with a weighted mean 206 Pb/238 U age of 762±18 Ma,similar to that of the felsic ultramylonites and the Early Cretaceous ages with a weighted mean 206Pb/238U age of 143±1.8 Ma,indicating the anatectic metamorphism in the Dabie Orogenic Belt(DOB).Based on integrated analysis of the structure,thermal conditions of ductile deformation and the contact relations of the dated rocks,the activation time of the Xiaotian–Mozitan Shear Zone is constrained between~143 Ma and 130 Ma,during which the DOB was undergoing a transition in tectonic regime from compression to extension.Therefore,the deformation and evolution of this shear zone plays an instrumental role in fully understanding this process.This research also inclines us to the interpretation of it as an extensional detachment,with regard to the tectonic properties of the shear zone.It may also be part of a continental scale extension in the background of the North China Block’s cratonic destruction,dominated by the subduction and roll-back of the Paleo-Pacific plate,but more detailed work is needed in order to unravel its complicated development.

The efficiency and accuracy of probability diagram, spatial statistic and fractal methods in the identification of shear zone gold mineralization: a case study of the Saqqez gold ore district,NW Iran

In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main objective is to evaluate the efficiency and accuracy of the methods in separation of anomalies on the shear zone gold mineralization.For this purpose,samples were taken from the secondary lithogeochemical environment(stream sediment samples)on the gold mineralization in Saqqez,NW of Iran.Interpretation of the histograms and diagrams showed that the MPD is capable of identifying two phases of mineralization.The fractal method could separate only one phase of change based on the fractal dimension with high concentration areas of the Au element.The spatial analysis showed two mixed subpopulations after U=0 and another subpopulation with very high U values.The MPD analysis followed spatial analysis,which shows the detail of the variations.Six mineralized zones detected from local geochemical exploration results were used for validating the methods mentioned above.The MPD method was able to identify the anomalous areas higher than 90%,whereas the two other methods identified 60%(maximum)of the anomalous areas.The raw data without any estimation for the concentration was used by the MPD method using aminimum of calculations to determine the threshold values.Therefore,the MPD method is more robust than the other methods.The spatial analysis identified the detail soft hegeological and mineralization events that were affected in the study area.MPD is recommended as the best,and the spatial U-analysis is the next reliable method to be used.The fractal method could show more detail of the events and variations in the area with asymmetrical grid net and a higher density of sampling or at the detailed exploration stage.

Magnetic fabrics in characterization of magma emplacement and tectonic evolution of the Moyar Shear Zone,South India

The Moyar Shear Zone （MSZ） of the South Indian granulite terrain hosts a prominent syenite pluton （-560 Ma） and associated NW-SE to NE-SW trending mafic dyke swarm （-65 Ma and 95 Ma）. Preliminary magnetic fabric studies in the mafic dykes, using Anisotropy of Magnetic Susceptibly （AMS） studies at low-field, indicate successive emplacement and variable magma flow direction. Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites, indicating shear zone guided emplacement. Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated. The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear. Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.