Simulation and Experiment on Workability for Cold Pressure Forming of Sheet Metal Part with Step Cross-section

In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertical cross-section. According to the latest developing theory and potential of cold pressure forming： combination of pressure and cold forging, a new flow control forming of sheet metal（FCF） is excogitated based on blanking process of general stamping and combined with cold forging processes such as extrusion and coining, etc, which is aiming at the above-mentioned new type of sheet metal part. With utilization of this new process, the new type of sheet metal parts can be manufactured. In order to shorten the testing period, the numerical simulation was carried out by using DEFORM-3D software, and both deformation and mechanics rules were analyzed. Based on the simulation, both punching part and blanked parts of this new type were successfully developed. Then a new conception of optimal distance between the step walls of inner hole and outside edge was proposed and the design principle for its numerical value was inferred. Furthermore, a mold set for combination of stamping ＆ cold forging was designed and manufactured, by which the technologic experiments were taken for validation with Aluminum plate of thickness 2.35 mm for power battery cover board, which verified the principle of the distance between the step walls. The research of cold pressure forming of thin sheet metal with step cross-section is significant, not only to the development of modem mechanical manufacture, but also to metal plastic forming science.

A Retrieval Algorithm of Sheet Metal Parts Based on Relationships of Features

With the rapid increase in the number of three-dimensional （3D） models each year, to quickly and easily find the part desired has become a big challenge of enterprises. Meanwhile, many methods and algorithms have been proposed for part retrieval. However, most of the existing methods are designed lbr mechanical parts, and can not be well worked for sheet metal part re- trieval. An approach to feature-based retrieval of sheet metal parts is presented. Firstly, the features frequently used in sheet metal part design are chosen as the ＂＇key words＂ in retrieval. Based on those features, a relative position model is built to express the different relationships of the features in 3D space. Secondly, a description method of the model is studied. With the descrip- tion method the relative position of features in sheet metal parts can be expressed by four location description matrices. Thirdly, based on the relative position model and location description matrices, the equivalent definition of relationships of two feature groups is given which is the basis to calculate the similarity of two sheet metal parts. Next, the tbrmula of retrieval algorithm for sheet metal parts is given. Finally, a prototype system is developed to test and verify the effectiveness of the retrieval method suggested. Experiments verify that the new method is able to meet the requirements of searching sheet metal parts and possesses potentials in practical application.

Automatic recognition of intersecting features of freeform sheet metal parts

This paper presents an approach for recognizing both isolated and intersecting geometric features of freeform surface models of parts,for the purpose of automating the process planning of sheet metal forming.The developed methodology has three major steps:subdivision of B-spline surfaces,detection of protrusions and depressions,and recognition of geometric features for sheet metal forming domain.The input geometry data format of the part is based on an IGES CAD surface model represented in the form of trimmed B-spline surfaces.Each surface is classified or subdivided into different curvature regions with the aid of curvature property surfaces obtained by using symbolic computation of B-spline surfaces.Those regions satisfying a particular geometry and topology relation are recognized as protrusion and depression(DP) shapes.The DP shapes are then classified into different geometric features using a rule-based approach.A verified feasibility study of the developed method is also presented.

Flexible-die forming process with solid granule medium on sheet metal

Certain non-metallic granules （NMG） were selected as the research object. It was proposed to conduct the volume compression experiments as well as those on the NMG physical properties at high stress levels. Then, not only the volume compression ratio curve but also the extended Drucker-Prager linear model were obtained. In addition, through the friction strength tests, parameters of the Mohr-Coulomb model were gained, which proved in basic agreement with those of the extended Drucker-Prager linear model. Additionally, curves of the friction coefficients between the NMG and the sheet metal trader different pressures were also obtained. Based on the material performance experiments, numerical analysis in respect of flexible-die forming process with solid granule medium （SGM） was conducted. The die and device for experiments of solid granule medium forming （SGMF） on sheet metal were designed and manufactured. Typical parabolic parts were successfully trial-produced. The tests and simulation results show that the sheet formability is significantly improved for the extraordinary friction performance during interaction between the SGM and the sheet metal surface. The process control and die structure are simple, and the shaped work-pieces enjoy many advantages, such as satisfactory surface quality and favorable die fitability, which offers a brand-new method and means for processing and preparation of sheet metals.

Sheet Metal Forming Simulation and Its Application in Stamping Process of Automobile Panels

The paper starts with a brief overview to the necessity of sheet metal forming simulation and the complexity of automobile panel forming, then leads to finite element analysis (FEA) which is a powerful simulation tool for analyzing complex three-dimensional sheet metal forming problems. The theory and features of the dynamic explicit finite element methods are introduced and the available various commercial finite element method codes used for sheet metal forming simulation in the world are discussed,and the civil and international status quo of automobile panel simulation as well. The front door outer panel of one certain new automobile is regarded as one example that the dynamic explicit FEM code Dynaform is used for the simulation of the front door outer panel forming process. Process defects such as ruptures are predicted. The improving methods can be given according to the simulation results. Foreground of sheet metal forming simulation is outlined.

Establishment of size-dependant constitutive model of micro-sheet metal materials

The inherent mechanism of size effect in micro-sheet material behavior of plastic forming was explained by the surface layer model and theory of metal crystal plasticity. A size-dependant constitutive model based on the surface layer model was established by introducing the scale parameters and modifying the classical Hall-Petch equation. The influence of the geometric dimensions and the grain size on the flow behavior of the material was discussed using the new material constitutive model. The results show that, the flow stress decreases while the sheet metal thickness decreases when the grain size keeps constant, and the micro-sheet metal with a larger grain size is more easily to be influenced by the size effects. The material constitutive model established is validated by the stress-strain curve of the micro-sheet metal with different thicknesses derived from the tensile experiments. The rationality of the material model is verified by the fact that the calculation results are consistent with the experimental results.

GENERAL COMPUTER MODEL FOR SHEET METAL DEEP-DRAWING PROCESS

A new comprehensive computer model was developed for sheet metal deep-drawing process, based on the theory of plastic anisotropy and under consideration of the effects of bending, blank-holding force, strain-hardening, the variation of thickness and tooling geometry. The model could be used to simulate the deforming stages of deep-drawing process and get the continuous distributions of stress and strain from the radial drawing region of material over a die and the stretch-forming region of material over a punch. It is concluded that the total strain theory can be used as a substitute for the incremental strain theory to analyse the force and deformation in sheet metal deep-drawing process. In addition, the effect of bending was also obtained.

A LOOP DRAWBEAD RESTRAINING FORCE MODEL IN SHEET METAL DEEP DRAWING PROCESS

In sheet metal forming, drawbeads are often used to control uneven material flow which may cause defects such as wrinkles, fracture, surface distortion and springback. Appropriate setting and adjusting the drawbead force is one of the most important pa- rameters in sheet metal forming process control. This paper derives the model of loop drawbead restraining force (DBRF) using plastic forming theory, and gives the min imum blankholding force. Experiments are carried out to verify the proposed DBRF model. The good agreement between the calculated values and experiments data justi- fies the proposed loop drawbead restraining force model.

Multi-Point Forming Technology for Sheet Metal

Multi-point forming (MPF) is an advanced manufacturing technology for three-dimensional sheet metal parts. In this paper, the MPF integrated system is described that can form a variety of part shapes without the need for solid dies, and given only geometry and material information about the desired part. The central component of this system is a pair of matrices of punches, and the desired discrete die surface is constructed by changing the positions of punches though the CAD and control system. The basic MPF process is introduced and the typical application examples show the applicability of the MPF technology. Wrinkle and dimple are the major forming defects in MPF process, numerical simulation is a feasible way to predict forming defects in MPF. In conventional stamping, the mode to form sheet metal with blankholder is an effective way to suppress wrinkling; the same is true in MPF. A MPF press with flexible blankholder was developed, and the forming results indicated the forming stability of this technique. Based on the flexibility of MPF, varying deformation path MPF and sectional MPF were explored that cannot be realized in conventional stamping. By controlling each punch in real-time, a sheet part can be manufactured along a specific forming path. When the path of deformation in MPF is designed properly, forming defects will be avoided completely and lager deformation is achieved. A work piece can be formed section by section though the sectional MPF, and this technique makes it possible to manufacture large size parts in a small MPF press. Some critical experiments were performed that confirmed the validity of two special MPF techniques.

SIX SIGMA OPTIMIZATION IN SHEET METAL FORMING BASED ON DUAL RESPONSE SURFACE MODEL

Iterations in optimization and numerical simulation for the sheet metal forming process may lead to extensive computation. In addition, uncertainties in materials or processing parameters may have great influence on the design quality. A six sigma optimization method is proposed, by combining the dual response surface method （DRSM） and six sigma philosophy, to save computation cost and improve reliability and robustness of parts. Using this method, statistical technology, including the design of experiment and analysis of variance, approximate model and six sigma philosophy are integrated together to achieve improved quality. Two sheet metal forming processes are provided as examples to illustrate the proposed method.

FAST ACCURATE PREDICTION OF BLANK SHAPE IN SHEET METAL FORMING

By using the Finite Element Inverse Approach based on the Hill quadratic anisotrop-ically yield criterion and the quadrilateral element, a fast analyzing software-FASTAMP for the sheet metal forming is developed. The blank shapes of three typical stampings are simulated and compared with numerical results given by the AUTOFORM software and experimental results, respectively. The comparison shows that the FASTAMP can predict blank shape and strain distribution of the stamping more precisely and quickly than those given by the traditional methods and the AUTOFORM.

Process of back pressure deep drawing with solid granule medium on sheet metal

The experimental die apparatus of the solid granules medium forming on sheet metal was designed and manufactured.Typical parts,such as conical,parabolic,cylindrical and square-box-shaped components,were successfully trial-produced as well.According to the analysis of the changing trends of the cross-section shape and the wall thickness during the process,it can be found that the shape of the free deformation zone of the sheet metal,which is the most critical thinning area,can be described as an approximately spherical cap.According to this forming feature,back pressure deep drawing technology with solid granules medium on sheet metal was proposed to restrain drastic thinning at the bottom of the part through the joint friction effect of solid granules medium,the back pressure tringle and the sheet metal.Therefore,the deep drawing limit of the sheet metal is significantly improved.In order to fabricate thin-walled rotary parts with great drawing ratio and complex cross-sections,a finite element model based on the material property test of the solid granules medium was established to optimize the scheme of the back pressure deep drawing.The effects on the forming performance of sheet metal from back pressure load and the approach of blank holding control were analyzed through this model.

Sheet Metal Forming Optimization by Using Surrogate Modeling Techniques

Surrogate assisted optimization has been widely applied in sheet metal forming design due to its efficiency. Therefore, to improve the efficiency of design and reduce the product development cycle, it is important for scholars and engineers to have some insight into the performance of each surrogate assisted optimization method and make them more flexible practically. For this purpose, the state-of-the-art surrogate assisted optimizations are investigated. Furthermore, in view of the bottleneck and development of the surrogate assisted optimization and sheet metal forming design, some important issues on the surrogate assisted optimization in support of the sheet metal forming design are analyzed and discussed, involving the description of the sheet metal forming design, off-line and online sampling strategies, space mapping algorithm, high dimensional problems, robust design, some challenges and potential feasible methods. Generally, this paper provides insightful observations into the performance and potential development of these methods in sheet metal forming design.

Frictional characteristics of sheet metals with superimposed ultrasonic vibrations

The forming performance of sheet metals in the deep-drawing process with ultrasonic vibrations can be improved by the surface effect between the sheet metal and the die.A sheet metal friction test with ultrasonic vibrations is performed to explore the cause of the surface effect.The frictional characteristics are investigated,and the corresponding friction expressions are established based on the contact mechanics and the elastic–plastic contact model for rough surfaces.Friction is caused by the elastic–plastic deformation of contacting asperities under normal loads.The actual contacting region between two surfaces increases with normal loads,whereas the normal distance decreases.The normal distance between the contacting surfaces is changed,asperities generate a tangential deformation with ultrasonic vibrations,and the friction coefficient is eventually altered.Ultrasonic vibrations are applied on a 40Cr steel punch at the frequency of 20 kHz and the amplitude of 4.2μm.In the friction tests,the punch is perpendicular to the surface of the magnesium alloy AZ31B sheet metals and is sliding with a relative velocity of 1 mm/s.The test results show that the friction coefficient is decreased by approximately 40%and the theoretical values are in accordance with the test values;Ultrasonic vibrations can clearly reduce wear and improve the surface quality of parts.

Deep Learning in Sheet Metal Bending With a Novel Theory-Guided Deep Neural Network

Sheet metal forming technologies have been intensively studied for decades to meet the increasing demand for lightweight metal components.To surmount the springback occurring in sheet metal forming processes,numerous studies have been performed to develop compensation methods.However,for most existing methods,the development cycle is still considerably time-consumptive and demands high computational or capital cost.In this paper,a novel theory-guided regularization method for training of deep neural networks(DNNs),implanted in a learning system,is introduced to learn the intrinsic relationship between the workpiece shape after springback and the required process parameter,e.g.,loading stroke,in sheet metal bending processes.By directly bridging the workpiece shape to the process parameter,issues concerning springback in the process design would be circumvented.The novel regularization method utilizes the well-recognized theories in material mechanics,Swift’s law,by penalizing divergence from this law throughout the network training process.The regularization is implemented by a multi-task learning network architecture,with the learning of extra tasks regularized during training.The stress-strain curve describing the material properties and the prior knowledge used to guide learning are stored in the database and the knowledge base,respectively.One can obtain the predicted loading stroke for a new workpiece shape by importing the target geometry through the user interface.In this research,the neural models were found to outperform a traditional machine learning model,support vector regression model,in experiments with different amount of training data.Through a series of studies with varying conditions of training data structure and amount,workpiece material and applied bending processes,the theory-guided DNN has been shown to achieve superior generalization and learning consistency than the data-driven DNNs,especially when only scarce and scattered experiment data are available for training which is often the case in practice.The theory-guided DNN could also be applicable to other sheet metal forming processes.It provides an alternative method for compensating springback with significantly shorter development cycle and less capital cost and computational requirement than traditional compensation methods in sheet metal forming industry.

DETERMINATION OF BLANK HOLDER FORCE IN SHEET METAL DEEP DRAWING PROCESS

Blank holder force (BHF) is an important measure to control the sheet metal forming. BHF is identified quickly using artificial neural network (ANN) on the basis of its analytical description. And critical rupture and wrinkle BHF curves are given. A close-loop control system is established to finish the forming process.

Upper bound analysis for hybrid sheet metals extrusion process through curved dies

The extrusion process of hybrid sheet metals through arbitrarily curved dies was analyzed by the method of upper bound. The material under deformation was divided into two deformation regions, bimetal and mono-metal regions, and the flow of the material in each region was assumed as plane strain state. The internal, shearing and frictional power terms were derived and they were used in the upper bound model. The extrusion forces for two types of die shapes, an optimum wedge shaped die and an optimum streamlined die shape for a hybrid sheet composed of copper as sleeve and aluminum as core were determined. The corresponding results for those two die shapes were also determined by using the finite element code, ABAQUS, and compared with the upper bound results. These comparisons show a good agreement.

DEFORMATION ANALYSIS OF SHEET METAL SINGLE-POINT INCREMENTAL FORMING BY FINITE ELEMENT METHOD SIMULATION

Single-point incremental forming （SPIF） is an innovational sheet metal forming method without dedicated dies, which belongs to rapid prototyping technology. In generalizing the SPIF of sheet metal, the deformation analysis on forming process becomes an important and useful method for the planning of shell products, the choice of material, the design of the forming process and the planning of the forming tool. Using solid brick elements, the finite element method（FEM） model of truncated pyramid was established. Based on the theory of anisotropy and assumed strain formulation, the SPIF processes with different parameters were simulated. The resulted comparison between the simulations and the experiments shows that the FEM model is feasible and effective. Then, according to the simulated forming process, the deformation pattern of SPIF can be summarized as the combination of plane-stretching deformation and bending deformation. And the study about the process parameters＇ impact on deformation shows that the process parameter of interlayer spacing is a dominant factor on the deformation. Decreasing interlayer spacing, the strain of one step decreases and the formability of blank will be improved. With bigger interlayer spacing, the plastic deformation zone increases and the forming force will be bigger.

Influence of Transverse Normal Pressure on Deformation Behavior of Sheet Metal

To investigate the influence of magnitude and distribution of the transverse normal pressure on deformation behavior of sheet metal,viscous pressure bulge test (VPB) of overlapping sheet metals is proposed,where the overlapped sheet metal is deformed under the dual-sided normal pressure provided by viscous medium and the overlapping sheet.The transverse normal pressure loading features provided by overlapping sheet metals are first simulated by DEFORM-2D.It shows that the magnitude and space distribution of transverse normal pressure are dependent on strain hardening exponent n-,strength coefficient K-and thickness t-values of the overlapping sheet metal.Based on the stress,deviator stress and strain distribution resulted from the finite element simulation,it indicated that the uniform transverse normal pressure has no effect on deviator stress,the figure and strain distribution of bulge specimens have no change.The non-uniform transverse normal pressure can remarkably change the figure and metal flow of specimens,and the formability of sheet metal can be improved by controlling the transverse normal pressure distribution.

Uniaxial tensile behavior of porous metal fiber sintered sheet

A novel porous metal fiber sintered sheet （PMFSS） with a three-dimensional reticulated structure was fabricated by multi-tooth cutting and high-temperature solid-phase sintering process with copper fibers. A uniaxial tensile test was conducted to investigate the effect of fiber length and natural aging factor on the tensile properties of the PMFSS. Results indicated that, under given stress, the increase of fiber length helped reinforce the tensile strength. The elongation of the PMFSS with medium length fiber of 15 mm exhibited the optimal performance, reaching about 13.5%. After natural aging treatment for a month, the tensile strength of PMFSS significantly decreased, but the change of elongation was negligible except for the one with the shortest fiber length of 5 mm, whose elongation was effectively improved. The morphological fracture features of PMFSSs were also characterized.