South China is famous for the extensive magmatism and polymetallic mineralization that took place there in the Mesozoic. Shilu is a large porphyry–skarn Cu–Mo deposit in the Yangchun Basin, South China. The litholog...South China is famous for the extensive magmatism and polymetallic mineralization that took place there in the Mesozoic. Shilu is a large porphyry–skarn Cu–Mo deposit in the Yangchun Basin, South China. The lithology of the Shilu intrusion is granodiorite and quartz diorite, both of which are high-K calc-alkaline series, with high Sr([400 ppm) content along with low Y and Yb contents. Most of the samples have characteristics of adakite except for a few samples that have slightly higher Y and Yb contents, which may be plausibly explained by crustal contamination. Laser Ablation Inductively Coupled Plasma Mass Spectrometry zircon U–Pb dating revealed ages between 106.6 ± 1.3 and 103.9 ± 0.5 Ma, with multiple magmatic pulses. Molybdenite Re–Os isochron age of 102.2 ± 2.9 Ma(MSWD = 9.4) was determined, which is identical to the youngest zircon U–Pb age(103.9 ± 0.5 Ma) within error.The Shilu intrusion has high oxygen fugacity as indicated by high zircon Ce^(4+)/Ce^(3+) and Eu_N/Eu_N* ratios. Considering the geochemical characteristics(high Sr, and low Y and Yb contents), high oxygen fugacity, and copper mineralization of the Shilu intrusion, it was most likely formed by partial melting of a subducted young oceanic slab. Whole-rock Sr–Nd isotope-, zircon Hf isotope-, and whole-rock trace element analyses show that Shilu adakitic magmas may have interacted with type II enriched mantle and/or crustal materials during ascent. South China was affected by the Pacific tectonic regime to the east and the Neo-Tethys tectonic regime to the south in the Cretaceous. Based on the Pacific Plate drifting and rotation history, it is hard to explain how the Pacific Plate would have subducted and melted, forming adakitic rocks in the Shilu region. Considering the tectonic history of Southeast Asia and the South China Sea, the Neo-Tethys trench should have been much closer to the South China Block in the Cretaceous, and thus have had a greater impact on the South China Block. Based on the subduction direction, time of subduction,and distance between the Neo-Tethys subduction zone and the Shilu deposit, subduction of the Neo-Tethys ridge is the best mechanism for explaining the Shilu adakitic rocks and Cu–Mo mineralization.展开更多
Presented in this paper are Sm-Nd isotope and major, trace and rare-earth element analyses of bimodal volcanic rocks of the Shilu Group and other stratigraphic units in northwntern Hainan Island, South China. It is sh...Presented in this paper are Sm-Nd isotope and major, trace and rare-earth element analyses of bimodal volcanic rocks of the Shilu Group and other stratigraphic units in northwntern Hainan Island, South China. It is shown that there are some N-MORB-type basalts (spilites) in the western part of the bimodal volcanic belt, in addition to some E-MORB-type and initial rift-type tholeiites (lRT) in the middle and eastern parts. Sm-Nd model ages of these basalts range from 545Ma to 460 Ma. The other extremes of the bimodal volcanics are porphyritic quartz rhyolites, which are characteristic of crustal material source. Sm-Nd model ages of the rhyolites range from 1562 Ma to 1371 Ma. The bimodal volcanic rocks are almost distributed in rifts or faulted depressions, as well as in the Upper Paleozoic rift of Hainan Island.Tholeiites of the Shilu Group can be compared with Cenozoic basalts in the midddle and southern parts of the Red Sea Rift Belt in Petrology, elemental geochemiistry and Sm-Nd isotope geology.Shilu iron ores are closely associated with N-MORB-type basalts located in the westem bimodal volcanic belt. It is very interesting to note that the Shilu Fe-Co-Cu deposit can also be compared with Atlantis II Deep in the Red Sea Rift Belt. Therefore, the present authors believe that the Shilu deposit is a kind of hydrothermal deposit related to ocean volcanic belt, where the geotectonic setting belongs to initial extensional rifts in the oceanic crust. On the other hand, the largest Fe-Co-Cu ore deposit in China used to be influenced by Hercynian granites after mineralization, as is cleariy observed on both ε Nd (T)-1/Nd and ε Nd (T)-147/Sm/144Nd diagrams.展开更多
The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are main...The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are mainly hosted within a low-grade to medium-grade,dominantly submarine metamorphosed siliciclastic and carbonate sedimentary succession of the Neoproterozoic Shilu Group.Three facies types of metamorphosed BIFs,i.e.the oxide facies,the silicate-oxide facies and the sulfide-carbonate facies BIFs,are identified within the sixth sequence of the Shilu Group.The oxide facies BIF(i.e.the Fe-rich itabirites or ores)consists of alternating hematite-rich microbands with quartz-rich microbands;the silicate-oxide facies BIF(i.e.the Fe-poor itabirites or ores)comprises alternating millimeter-to a few tens meter-scale,magnetite-hematite-rich bands with calcsilicate-rich(garnet+actinolite+diopside+epidote+quartz)meso-to microbands;and the sulfide-carbonate facies BIF(i.e.the Co-Cu ores)contains alternating macro-to mesobands of Co-bearing pyrite and pyrrhotite,and chalcopyrite with mesobands of dolomite+calcite+diopside+quartz and/or chlorite+sericite+quartz.The blastooolitic,blastopelletoid blastocolloidal and blastopsammitic textures,and blasobedding structures which most likely represent primary sedimentation are often observed in these BIF facies.The interbedded host rocks with the BIFs mainly are the pyroxene-amphibole rocks and the banded or impure dolostones,and also contain banded or laminated structures,and lepido-gra-noblastic,nematoblastic and/or blastoclastic textures.Compositionally,the main host rocks,the pyroxene-amphibole rocks contain basic-intermediate SiO_2(~54.00 wt.%),CaO(~14.19 wt.%),MgO(~9.68 wt.%)and Al_2O_3(~8.49 wt.%)with a positive correlation between Al_2O_3 and TiO_2.The UCC-like Zr and Hf abundances,high Ba content andεNd(t)value(^-5.99)as well as the ratios of La/YbPAAS(0.17~1.00),δEuPAAS(0.88~1.12)andδCePAAS(0.93~1.13)commonly reveal that the protoliths to this type rocks are hydrogenic with a large contribution of terrigenous sediments and minor hydrothermal input.The high CaO+MgO+LOI contents and the extremely low trace element and REEconcentrations as well as the ratios of Y/Ho(44~45),δEuPAAS(1.13~1.57)andδCePAAS(0.69~0.98)reflect a marine origin with minor terrigenous materials for the banded or impure dolostones.Moreover,this type rocks also account for a negativeεNd(t)value(^-7.49).The oxide facies BIF is dominated by Fe_2O_3+FeO(~75.59wt.%)and SiO_2(~20.47 wt.%)with aεNd(t)value of^-6.10.The variable contents in Al_2O_3,TiO 2,K2O,Na2O,Zr,Hf and∑REE,and variable ratios of Y/Ho(24~39)andδEuPAAS(0.86~11.07)suggest the precursor sediments to this facies BIF are admixtures of sea-floor hydrothermal fluids and seawaters with minor involvement of detrital components.Compared to the oxide facies BIF,the silicate-oxide facies BIF is lower in Fe_2O_3+Fe O(~39.81wt.%)and Ba but higher in SiO_2(~42.54 wt.%),Al2O3(~3.60 wt.%),TiO_2(~0.19 wt.%),MgO(~1.12 wt.%),CaO(~9.06 wt.%),K_2O(~0.98 wt.%),Mn and Zr.The ratios of Y/Ho(25~34),La/YbPAAS(0.14-0.74)andδEuPAAS(0.91~1.12)most likely are linked to higher degree of detrital contamintants.While the sulfide-caronate facies BIF is main but variable in Fe_2O_3+Fe O(15.79~57.91 wt.%),SiO 2(0.54~61.52 wt.%),MgO(0.12~16.09wt.%),CaO(0.17~23.41 wt.%)and LOI(8.28-30.06 wt.%).The generally low contents in trace elements(including REE)except for an obvious enrichment in Pb,and the positive Ce anomalies(δCePAAS=1.04~1.95)and negative Pr anomalies(δPrPAAS=0.67~0.93),as well as the variable ratios ofδEuPAAS(0.72~1.71),La/YbPAAS(0.26~1.60)and Y/Ho(26~57)suggest that the precursors to the sulfide-carbonate facies BIF mainly are metalliferious sediments from deep-marine hydrotheral source with minor detrital components.The T2DM ages(ca.2.0 Ga)imply that the Shilu BIFs and interbedded host rocks contain a component with Paleoproterozoic crustal residence age due to a significant crustal accretion event at ca.2.0 Ga in Hainan Island.In connection with the petrographical and mineralogical relationship,we conclude that the precursor precipitates to the Shilu BIFs are variable degree of admixtures of the Fe-Co-Cu-(Si)-rich hydrothermal fluids and detrital components from seawater and fresh water carring continental landmass;whereas the protolith to the main interbedded host rocks,i.e.the pyroxene-amphibole rocks,most likely was terrigenous,fine-grained clastic-sediments but with significant input of hydrothermal fluids in a seawater environment.As a result,a continent marginal marine basin is proposed for deposition of the Shilu BIFs and interbedded host rocks.Sea-level fluctuations caused by marine transgression–regressions possibly contributed to changes in the composition and varied input of the terrigenous sediments.展开更多
The Shilu iron ore deposit,located in the western Hainan Province,South China,is one of the most important iron-ore mining districts in China not only for its huge reserves of hematite-rich ores,but also for its poten...The Shilu iron ore deposit,located in the western Hainan Province,South China,is one of the most important iron-ore mining districts in China not only for its huge reserves of hematite-rich ores,but also for its potentially economic significance of associated metals of copper,cobalt,nickel,silver,lead and zinc,and of non-metals of dolomite,quartzite,barite,gypsum and sulfur.展开更多
This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and...This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit （Yangchun, Guangdong Province, China） and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland （Australia）. Two modelling approaches, discrete deformation modelling and continuum coupled deformation and fluid flow modelling, are involved. The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit, and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures. The continuum coupled deformation and fluid flow model indicates that pattern of the Cu- veins near the Shilu deposit is the result of shear strain localization, development of dilation and fluid focussing into the dilatant fracture segments. The 3D case-study models （with deformation and fluid flow coupling） on the Hodgkinson Province generated a number of potential gold mineralization展开更多
基金supported by the DREAM project of MOST China 2016YFC0600408NSFC 91328204,41421062China Geological Survey (12120114015801)
文摘South China is famous for the extensive magmatism and polymetallic mineralization that took place there in the Mesozoic. Shilu is a large porphyry–skarn Cu–Mo deposit in the Yangchun Basin, South China. The lithology of the Shilu intrusion is granodiorite and quartz diorite, both of which are high-K calc-alkaline series, with high Sr([400 ppm) content along with low Y and Yb contents. Most of the samples have characteristics of adakite except for a few samples that have slightly higher Y and Yb contents, which may be plausibly explained by crustal contamination. Laser Ablation Inductively Coupled Plasma Mass Spectrometry zircon U–Pb dating revealed ages between 106.6 ± 1.3 and 103.9 ± 0.5 Ma, with multiple magmatic pulses. Molybdenite Re–Os isochron age of 102.2 ± 2.9 Ma(MSWD = 9.4) was determined, which is identical to the youngest zircon U–Pb age(103.9 ± 0.5 Ma) within error.The Shilu intrusion has high oxygen fugacity as indicated by high zircon Ce^(4+)/Ce^(3+) and Eu_N/Eu_N* ratios. Considering the geochemical characteristics(high Sr, and low Y and Yb contents), high oxygen fugacity, and copper mineralization of the Shilu intrusion, it was most likely formed by partial melting of a subducted young oceanic slab. Whole-rock Sr–Nd isotope-, zircon Hf isotope-, and whole-rock trace element analyses show that Shilu adakitic magmas may have interacted with type II enriched mantle and/or crustal materials during ascent. South China was affected by the Pacific tectonic regime to the east and the Neo-Tethys tectonic regime to the south in the Cretaceous. Based on the Pacific Plate drifting and rotation history, it is hard to explain how the Pacific Plate would have subducted and melted, forming adakitic rocks in the Shilu region. Considering the tectonic history of Southeast Asia and the South China Sea, the Neo-Tethys trench should have been much closer to the South China Block in the Cretaceous, and thus have had a greater impact on the South China Block. Based on the subduction direction, time of subduction,and distance between the Neo-Tethys subduction zone and the Shilu deposit, subduction of the Neo-Tethys ridge is the best mechanism for explaining the Shilu adakitic rocks and Cu–Mo mineralization.
文摘Presented in this paper are Sm-Nd isotope and major, trace and rare-earth element analyses of bimodal volcanic rocks of the Shilu Group and other stratigraphic units in northwntern Hainan Island, South China. It is shown that there are some N-MORB-type basalts (spilites) in the western part of the bimodal volcanic belt, in addition to some E-MORB-type and initial rift-type tholeiites (lRT) in the middle and eastern parts. Sm-Nd model ages of these basalts range from 545Ma to 460 Ma. The other extremes of the bimodal volcanics are porphyritic quartz rhyolites, which are characteristic of crustal material source. Sm-Nd model ages of the rhyolites range from 1562 Ma to 1371 Ma. The bimodal volcanic rocks are almost distributed in rifts or faulted depressions, as well as in the Upper Paleozoic rift of Hainan Island.Tholeiites of the Shilu Group can be compared with Cenozoic basalts in the midddle and southern parts of the Red Sea Rift Belt in Petrology, elemental geochemiistry and Sm-Nd isotope geology.Shilu iron ores are closely associated with N-MORB-type basalts located in the westem bimodal volcanic belt. It is very interesting to note that the Shilu Fe-Co-Cu deposit can also be compared with Atlantis II Deep in the Red Sea Rift Belt. Therefore, the present authors believe that the Shilu deposit is a kind of hydrothermal deposit related to ocean volcanic belt, where the geotectonic setting belongs to initial extensional rifts in the oceanic crust. On the other hand, the largest Fe-Co-Cu ore deposit in China used to be influenced by Hercynian granites after mineralization, as is cleariy observed on both ε Nd (T)-1/Nd and ε Nd (T)-147/Sm/144Nd diagrams.
文摘The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are mainly hosted within a low-grade to medium-grade,dominantly submarine metamorphosed siliciclastic and carbonate sedimentary succession of the Neoproterozoic Shilu Group.Three facies types of metamorphosed BIFs,i.e.the oxide facies,the silicate-oxide facies and the sulfide-carbonate facies BIFs,are identified within the sixth sequence of the Shilu Group.The oxide facies BIF(i.e.the Fe-rich itabirites or ores)consists of alternating hematite-rich microbands with quartz-rich microbands;the silicate-oxide facies BIF(i.e.the Fe-poor itabirites or ores)comprises alternating millimeter-to a few tens meter-scale,magnetite-hematite-rich bands with calcsilicate-rich(garnet+actinolite+diopside+epidote+quartz)meso-to microbands;and the sulfide-carbonate facies BIF(i.e.the Co-Cu ores)contains alternating macro-to mesobands of Co-bearing pyrite and pyrrhotite,and chalcopyrite with mesobands of dolomite+calcite+diopside+quartz and/or chlorite+sericite+quartz.The blastooolitic,blastopelletoid blastocolloidal and blastopsammitic textures,and blasobedding structures which most likely represent primary sedimentation are often observed in these BIF facies.The interbedded host rocks with the BIFs mainly are the pyroxene-amphibole rocks and the banded or impure dolostones,and also contain banded or laminated structures,and lepido-gra-noblastic,nematoblastic and/or blastoclastic textures.Compositionally,the main host rocks,the pyroxene-amphibole rocks contain basic-intermediate SiO_2(~54.00 wt.%),CaO(~14.19 wt.%),MgO(~9.68 wt.%)and Al_2O_3(~8.49 wt.%)with a positive correlation between Al_2O_3 and TiO_2.The UCC-like Zr and Hf abundances,high Ba content andεNd(t)value(^-5.99)as well as the ratios of La/YbPAAS(0.17~1.00),δEuPAAS(0.88~1.12)andδCePAAS(0.93~1.13)commonly reveal that the protoliths to this type rocks are hydrogenic with a large contribution of terrigenous sediments and minor hydrothermal input.The high CaO+MgO+LOI contents and the extremely low trace element and REEconcentrations as well as the ratios of Y/Ho(44~45),δEuPAAS(1.13~1.57)andδCePAAS(0.69~0.98)reflect a marine origin with minor terrigenous materials for the banded or impure dolostones.Moreover,this type rocks also account for a negativeεNd(t)value(^-7.49).The oxide facies BIF is dominated by Fe_2O_3+FeO(~75.59wt.%)and SiO_2(~20.47 wt.%)with aεNd(t)value of^-6.10.The variable contents in Al_2O_3,TiO 2,K2O,Na2O,Zr,Hf and∑REE,and variable ratios of Y/Ho(24~39)andδEuPAAS(0.86~11.07)suggest the precursor sediments to this facies BIF are admixtures of sea-floor hydrothermal fluids and seawaters with minor involvement of detrital components.Compared to the oxide facies BIF,the silicate-oxide facies BIF is lower in Fe_2O_3+Fe O(~39.81wt.%)and Ba but higher in SiO_2(~42.54 wt.%),Al2O3(~3.60 wt.%),TiO_2(~0.19 wt.%),MgO(~1.12 wt.%),CaO(~9.06 wt.%),K_2O(~0.98 wt.%),Mn and Zr.The ratios of Y/Ho(25~34),La/YbPAAS(0.14-0.74)andδEuPAAS(0.91~1.12)most likely are linked to higher degree of detrital contamintants.While the sulfide-caronate facies BIF is main but variable in Fe_2O_3+Fe O(15.79~57.91 wt.%),SiO 2(0.54~61.52 wt.%),MgO(0.12~16.09wt.%),CaO(0.17~23.41 wt.%)and LOI(8.28-30.06 wt.%).The generally low contents in trace elements(including REE)except for an obvious enrichment in Pb,and the positive Ce anomalies(δCePAAS=1.04~1.95)and negative Pr anomalies(δPrPAAS=0.67~0.93),as well as the variable ratios ofδEuPAAS(0.72~1.71),La/YbPAAS(0.26~1.60)and Y/Ho(26~57)suggest that the precursors to the sulfide-carbonate facies BIF mainly are metalliferious sediments from deep-marine hydrotheral source with minor detrital components.The T2DM ages(ca.2.0 Ga)imply that the Shilu BIFs and interbedded host rocks contain a component with Paleoproterozoic crustal residence age due to a significant crustal accretion event at ca.2.0 Ga in Hainan Island.In connection with the petrographical and mineralogical relationship,we conclude that the precursor precipitates to the Shilu BIFs are variable degree of admixtures of the Fe-Co-Cu-(Si)-rich hydrothermal fluids and detrital components from seawater and fresh water carring continental landmass;whereas the protolith to the main interbedded host rocks,i.e.the pyroxene-amphibole rocks,most likely was terrigenous,fine-grained clastic-sediments but with significant input of hydrothermal fluids in a seawater environment.As a result,a continent marginal marine basin is proposed for deposition of the Shilu BIFs and interbedded host rocks.Sea-level fluctuations caused by marine transgression–regressions possibly contributed to changes in the composition and varied input of the terrigenous sediments.
文摘The Shilu iron ore deposit,located in the western Hainan Province,South China,is one of the most important iron-ore mining districts in China not only for its huge reserves of hematite-rich ores,but also for its potentially economic significance of associated metals of copper,cobalt,nickel,silver,lead and zinc,and of non-metals of dolomite,quartzite,barite,gypsum and sulfur.
文摘This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit （Yangchun, Guangdong Province, China） and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland （Australia）. Two modelling approaches, discrete deformation modelling and continuum coupled deformation and fluid flow modelling, are involved. The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit, and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures. The continuum coupled deformation and fluid flow model indicates that pattern of the Cu- veins near the Shilu deposit is the result of shear strain localization, development of dilation and fluid focussing into the dilatant fracture segments. The 3D case-study models （with deformation and fluid flow coupling） on the Hodgkinson Province generated a number of potential gold mineralization
