This research studied the initiator efficiency for producing polymeric particles of poly(styrene-co-methyl methacrylate)copolymers by a Shirasu porous glass membrane(SPG)emulsification technique followed by suspension...This research studied the initiator efficiency for producing polymeric particles of poly(styrene-co-methyl methacrylate)copolymers by a Shirasu porous glass membrane(SPG)emulsification technique followed by suspension copolymerization.BPO,ADVN,and AIBN were used as initiators and we found that BPO is the most suitable initiator.Copolymers for various feed ratios of styrene/methyl methacrylate were thus synthesized by benzoyl peroxide,and their copolymer particle size,molecular weight distribution and pat-ride size distribution were characterized.Then n-BMA or 2-EHMA was added as the third monomer to decrease the terpolymer glass transition temperature.This article describes the preparation technique,recipes and polymerization conditions for producing both copolymer and terpolymer particles,particle size changes,the corresponding particle morphologies and glass transition temperatures.展开更多
Much attention has in recent years been paid to fine applications of polymer particles, e.g., carrier for enzyme, separation media for protein, DNA and cell, and carrier for drug in Drug Delivery System (DDS). Control...Much attention has in recent years been paid to fine applications of polymer particles, e.g., carrier for enzyme, separation media for protein, DNA and cell, and carrier for drug in Drug Delivery System (DDS). Control of polymer particle size is especially important in such fine applications. For instance, when the particles are used as a carrier of anti-cancer agents, the locations of particles containing anti-cancer agents also depend on the size of the particles. In this paper, various techniques of controlling polymer particle size are described, with emphasis on Shirasu Porous Glass (SPG) membrane emulsification, as carried out in our research group.展开更多
Uniform polystyrene hollow particles were prepared successfully by employing SPG (Shirasu porous glass) emulsification technique. The oil phase composed of monomer [styrene (St) and N,N’-dimethylamino ethylmethacryla...Uniform polystyrene hollow particles were prepared successfully by employing SPG (Shirasu porous glass) emulsification technique. The oil phase composed of monomer [styrene (St) and N,N’-dimethylamino ethylmethacrylate (DMAEMA)], hexadecane (HD) and initiator was permeated through the uniform pores of SPG membrane into the aqueous phase (containing stabilizer, emulsifier and water-soluble inhibitor ) by a gas pressure to form uniform droplets. The droplets were then polymerized at 70℃. It was found that the hollow particles were obtained by adding a small amount of DMAEMA into the oil phase and by using NaNo2 as the water-soluble inhibitor, while only one-hole particles were obtained without adding DMAEMA, or when using diaminophenylene (DAP) or hydroquinone (HQ) as the inhibitor. The formation mechanism was discussed by the view of interfacial tensions between polymer and aqueous phase, HD and aqueous phase, and HD and polymer. Further more, it was found that hollow particles can be obtained even when DMAEMA content in the oil phase was very low, by increasing HD to high value.展开更多
文摘This research studied the initiator efficiency for producing polymeric particles of poly(styrene-co-methyl methacrylate)copolymers by a Shirasu porous glass membrane(SPG)emulsification technique followed by suspension copolymerization.BPO,ADVN,and AIBN were used as initiators and we found that BPO is the most suitable initiator.Copolymers for various feed ratios of styrene/methyl methacrylate were thus synthesized by benzoyl peroxide,and their copolymer particle size,molecular weight distribution and pat-ride size distribution were characterized.Then n-BMA or 2-EHMA was added as the third monomer to decrease the terpolymer glass transition temperature.This article describes the preparation technique,recipes and polymerization conditions for producing both copolymer and terpolymer particles,particle size changes,the corresponding particle morphologies and glass transition temperatures.
文摘Much attention has in recent years been paid to fine applications of polymer particles, e.g., carrier for enzyme, separation media for protein, DNA and cell, and carrier for drug in Drug Delivery System (DDS). Control of polymer particle size is especially important in such fine applications. For instance, when the particles are used as a carrier of anti-cancer agents, the locations of particles containing anti-cancer agents also depend on the size of the particles. In this paper, various techniques of controlling polymer particle size are described, with emphasis on Shirasu Porous Glass (SPG) membrane emulsification, as carried out in our research group.
文摘Uniform polystyrene hollow particles were prepared successfully by employing SPG (Shirasu porous glass) emulsification technique. The oil phase composed of monomer [styrene (St) and N,N’-dimethylamino ethylmethacrylate (DMAEMA)], hexadecane (HD) and initiator was permeated through the uniform pores of SPG membrane into the aqueous phase (containing stabilizer, emulsifier and water-soluble inhibitor ) by a gas pressure to form uniform droplets. The droplets were then polymerized at 70℃. It was found that the hollow particles were obtained by adding a small amount of DMAEMA into the oil phase and by using NaNo2 as the water-soluble inhibitor, while only one-hole particles were obtained without adding DMAEMA, or when using diaminophenylene (DAP) or hydroquinone (HQ) as the inhibitor. The formation mechanism was discussed by the view of interfacial tensions between polymer and aqueous phase, HD and aqueous phase, and HD and polymer. Further more, it was found that hollow particles can be obtained even when DMAEMA content in the oil phase was very low, by increasing HD to high value.
