Practical Equivalent Method of Power Network Based on PSASP Short-Circuit Calculation Program

When using the ATP-EMTP software to simulate the electromagnetic transient of local line or nearby line for a large area power grid, it is necessary to divide the area grid into internal network and external network so as to make the external network simple for the restriction of the simulation calculation scale of software. Based on the existing equivalence method, in this paper we proposed a practical equivalent method using the short-circuit calculation program of PSASP. In this way, we completed the equivalence of northwest power grid operating at the large mode of summer 2016. By comparing the power flow and the characteristics of short-circuit in the system before and after the equivalence, this equivalent method is proved to be correct.

Partitioning Calculation Method of Short-Circuit Current for High Proportion DG Access to Distribution Network

Aiming at the problemthat the traditional short-circuit current calculationmethod is not applicable to Distributed Generation(DG)accessing the distribution network,the paper proposes a short-circuit current partitioning calculation method considering the degree of voltage drop at the grid-connected point of DG.Firstly,the output characteristics of DG in the process of low voltage ride through are analyzed,and the equivalent output model of DG in the fault state is obtained.Secondly,by studying the network voltage distribution law after fault in distribution networks under different DG penetration rates,the degree of voltage drop at the grid-connected point of DG is used as a partition index to partition the distribution network.Then,iterative computation is performed within each partition,and data are transferred between partitions through split nodes to realize the fast partition calculation of short-circuit current for high proportion DG access to distribution network,which solves the problems of long iteration time and large calculation error of traditional short-circuit current.Finally,a 62-node real distribution network model containing a high proportion of DG access is constructed onMATLAB/Simulink,and the simulation verifies the effectiveness of the short-circuit current partitioning calculation method proposed in the paper,and its calculation speed is improved by 48.35%compared with the global iteration method.

Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties

Based on experiments and first-principles calculations,the microstructures and mechanical properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6Zr(x=0,1,2,wt.%)alloys are investigated.The transformation process of long-period stacking ordered(LPSO)structure during solidification and heat treatment and its effect on the mechanical properties of experimental alloys are discussed.Results reveal that the stacking faults and 18R LPSO phases appear in the as-cast Mg-10Gd-4Y-1Zn-0.6Zr and Mg-10Gd-4Y-2Zn-0.6Zr alloys,respectively.After solution treatment,the stacking faults and 18R LPSO phase transform into 14H LPSO phase.The Enthalpies of formation and reaction energy of 14H and 18R LPSO are calculated based on first-principles.Results show that the alloying ability of 18R is stronger than that of 14H.The reaction energies show that the 14H LPSO phase is more stable than the 18R LPSO.The elastic properties of the 14H and 18R LPSO phases are also evaluated by first-principles calculations,and the results are in good agreement with the experimental results.The precipitation of LPSO phase improves the tensile strength,yield strength and elongation of the alloy.After solution treatment,the Mg-10Gd-4Y-2Zn-0.6Zr alloy has the best mechanical properties,and its ultimate tensile strength and yield strength are 278.7 MPa and 196.4 MPa,respectively.The elongation of Mg-10Gd-4Y-2Zn-0.6Zr reaches 15.1,which is higher than that of Mg-10Gd-4Y0.6Zr alloy.The improving mechanism of elastic modulus by the LPSO phases and the influence on the alloy mechanical properties are also analyzed.

Random Green's Function Method for Large-Scale Electronic Structure Calculation

We report a linear-scaling random Green's function(rGF) method for large-scale electronic structure calculation. In this method, the rGF is defined on a set of random states and is efficiently calculated by projecting onto Krylov subspace. With the rGF method, the Fermi–Dirac operator can be obtained directly, avoiding the polynomial expansion to Fermi–Dirac function. To demonstrate the applicability, we implement the rGF method with the density-functional tight-binding method. It is shown that the Krylov subspace can maintain at small size for materials with different gaps at zero temperature, including H_(2)O and Si clusters. We find with a simple deflation technique that the rGF self-consistent calculation of H_(2)O clusters at T = 0 K can reach an error of~ 1 me V per H_(2)O molecule in total energy, compared to deterministic calculations. The rGF method provides an effective stochastic method for large-scale electronic structure simulation.

Emerging perovskite materials for supercapacitors:Structure,synthesis,modification,advanced characterization,theoretical calculation and electrochemical performance

As a new generation electrode materials for energy storage,perovskites have attracted wide attention because of their unique crystal structure,reversible active sites,rich oxygen vacancies,and good stability.In this review,the design and engineering progress of perovskite materials for supercapacitors(SCs)in recent years is summarized.Specifically,the review will focus on four types of perovskites,perovskite oxides,halide perovskites,fluoride perovskites,and multi-perovskites,within the context of their intrinsic structure and corresponding electrochemical performance.A series of experimental variables,such as synthesis,crystal structure,and electrochemical reaction mechanism,will be carefully analyzed by combining various advanced characterization techniques and theoretical calculations.The applications of these materials as electrodes are then featured for various SCs.Finally,we look forward to the prospects and challenges of perovskite-type SCs electrodes,as well as the future research direction.

Organic Compounds Possessing the Plastic Crystalline Phase: Calculation of Their Fusion Enthalpies

For the first time, for different organic and inorganic compounds possessing the plastic crystalline phase, a new semiempirical equation describing dependence of their fusion enthalpies on such physico-chemical quantities as normal melting temperature, surface tension, molar volume and critical molar volume is received on the base of the principle of corresponding states and the energy equipartition theorem. Moreover, the proposed equation allows one to take into account the particularities of one-particle molecular rotation in the plastic crystalline phase.

Utility and Application of a Versatile Analytical Method for MMF Calculation in AC Machines

A versatile analytical method(VAM) for calculating the harmonic components of the magnetomotive force(MMF) generated by diverse armature windings in AC machines has been proposed, and the versatility of this method has been established in early literature. However, its practical applications and significance in advancing the analysis of AC machines need further elaboration. This paper aims to complement VAM by augmenting its theory, offering additional insights into its conclusions, as well as demonstrating its utility in assessing armature windings and its application of calculating torque for permanent magnet synchronous machines(PMSM). This work contributes to advancing the analysis of AC machines and underscores the potential for improved design and performance optimization.

High-throughput calculation-based rational design of Fe-doped MoS_(2) nanosheets for electrocatalytic p H-universal overall water splitting

Electrocatalytic water splitting is crucial for H2generation via hydrogen evolution reaction(HER)but subject to the sluggish dynamics of oxygen evolution reaction(OER).In this work,single Fe atomdoped MoS_(2)nanosheets(SFe-DMNs)were prepared based on the high-throughput density functional theory(DFT)calculation screening.Due to the synergistic effect between Fe atom and MoS_(2)and optimized intermediate binding energy,the SFe-DMNs could deliver outstanding activity for both HER and OER.When assembled into a two-electrode electrolytic cell,the SFe-DMNs could achieve the current density of 50 mA cm^(-2)at a low cell voltage of 1.55 V under neutral condition.These results not only confirmed the effectiveness of high-throughput screening,but also revealed the excellent activity and thus the potential applications in fuel cells of SFe-DMNs.

Syntheses,crystal structures,and quantum chemistry calculation of two Ni(Ⅱ)coordination polymers

Two new coordination polymers,[Ni(Hpdc)(bib)(H_(2)O)]_(n)(1)and{[Ni(bib)_(3)](ClO_(4))_(2)}_(n)(2),were prepared by mixing Ni^(2+),3,5⁃pyrazoledicarboxylic acid(H3pdc)/p⁃nitrobenzoic acid and 1,4⁃bis(imidazol⁃1⁃ylmethyl)butane(bib)by a hydrothermal method,respectively.X⁃ray crystallography reveals a 2D network constructed by six⁃coordinated Ni(Ⅱ)centers,bib,and Hpdc2-ligands in complex 1,while a 2D network is built by Ni(Ⅱ)and bib ligands in 2.Furthermore,the quantum⁃chemical calculations have been performed on‘molecular fragments’extracted from the crystal structure of 1 using the PBE0/LANL2DZ method in Gaussian 16 and the VASP program.CCDC:2343794,1;2343798,2.

Temperature field calculation of rail flash welding

The forging stage of rail flash welding has a decisive influence on joint strength,and the study of the temperature distribution in the process has an important role in further improving joint strength.In this paper,three calculation methods for the temperature field are given.First,the finite element model of the temperature field before forging rail flash welding is established by using the transient heat module of Ansys software and verified by infrared temperature measurement.Second,the temperature distribution of different parts of the rail before flash welding is obtained by using infrared thermal imaging equipment.Third,Matlab software is used to calculate the temperature of the non-measured part.Finally,the temperature distribution function along the rail axis is fitted through the temperature measurement data.The temperature distribution before the top forging of the rail flash welding can be used to analyze the joint and heat-affected zone organization and properties effectively and to guide the parameter setting and industrial production.

Effect of Types and Orders of Electromagnetic Field Finite Element Meshes on Power Communication Harmonic Parameters Calculation Results of Tubular Hydrogenerators

In generator design field,waveform total harmonic distortion(THD)and telephone harmonic factor(THF)are parameters commonly used to measure the impact of generator no-load voltage harmonics on the power communication quality.Tubular hydrogenerators are considered the optimal generator for exploiting low-head,high-flow hydro resources,and they have seen increasingly widespread application in China's power systems recent years.However,owing to the compact and constrained internal space of such generators,their internal magnetic-field harmonics are pronounced.Therefore,accurate calculation of their THD and THF is crucial during the analysis and design stages to ensure the quality of power communication.Especially in the electromagnetic field finite element modeling analysis of such generators,the type and order of the finite element meshes may have a significant impact on the THD and THF calculation results,which warrants in-depth research.To address this,this study takes a real 34 MW large tubular hydrogenerator as an example,and establishes its electromagnetic field finite element model under no-load conditions.Two types of meshes,five mesh densities,and two mesh orders are analyzed to reveal the effect of electromagnetic field finite element mesh types and orders on the calculation results of THD and THF for such generators.

First-Principles Calculation of the Topological Nodal-Line Semimetal FeGe_(2)

The electronic and topological properties of FeGe2 with a tetragonal crystal structure were investigated via first-principles calculations.The results demonstrate that FeGe2 in this structure exhibits anti-ferromagnetism,with two bands crossing the Fermi level nesting each other at high-symmetry points in the Brillouin zone,forming a nodal ring where the nodes intersect in momentum space.Additionally,it possesses nontrivial topological surface states.Upon inclusion of SOC(spin-orbit coupling),there are no significant changes observed in the band structure,nodal features,or surface states,indicating the persistence of its topological nodal-line characteristics.

Financial Calculation Problems and Countermeasure Analysis of Large-Scale Engineering Construction Projects

The financial aspects of large-scale engineering construction projects profoundly influence their success.Strengthening cost control and establishing a scientific financial evaluation system can enhance the project’s economic benefits,minimize unnecessary costs,and provide decision-makers with a robust financial foundation.Additionally,implementing an effective cash flow control mechanism and conducting a comprehensive assessment of potential project risks can ensure financial stability and mitigate the risk of fund shortages.Developing a practical and feasible fundraising plan,along with stringent fund management practices,can prevent fund wastage and optimize fund utilization efficiency.These measures not only facilitate smooth project progression and improve project management efficiency but also enhance the project’s economic and social outcomes.

GPU-based cross-platform Monte Carlo proton dose calculation engine in the framework of Taichi

In recent years,graphics processing units(GPUs)have been applied to accelerate Monte Carlo(MC)simulations for proton dose calculation in radiotherapy.Nonetheless,current GPU platforms,such as Compute Unified Device Architecture(CUDA)and Open Computing Language(OpenCL),suffer from cross-platform limitation or relatively high programming barrier.However,the Taichi toolkit,which was developed to overcome these difficulties,has been successfully applied to high-performance numerical computations.Based on the class II condensed history simulation scheme with various proton-nucleus interactions,we developed a GPU-accelerated MC engine for proton transport using the Taichi toolkit.Dose distributions in homogeneous and heterogeneous geometries were calculated for 110,160,and 200 MeV protons and were compared with those obtained by full MC simulations using TOPAS.The gamma passing rates were greater than 0.99 and 0.95 with criteria of 2 mm,2%and 1 mm,1%,respectively,in all the benchmark tests.Moreover,the calculation speed was at least 5800 times faster than that of TOPAS,and the number of lines of code was approximately 10 times less than those of CUDA or OpenCL.Our study provides a highly accurate,efficient,and easy-to-use proton dose calculation engine for fast prototyping,beamlet calculation,and education purposes.

N-Calculator与NUFER耦合模型和组合预测法在食物氮足迹研究中的应用

为改善传统N-Calculator模型的局限性,加强食物氮足迹核算结果与环境影响的联系,提高活性氮管理预见性,将N-Calculator模型与食物系统养分流动(Nutrient Flows in Food Chains,Environment and Resources Use,NUFER)模型进行耦合,以估算我国2001—2020年人均食物氮足迹,建立组合预测体系。结果显示:2001—2020年,我国人均食物氮足迹由16.04 kg N/a增至18.95 kg N/a;全国食物氮足迹由20.47 Mt N/a增至26.76 Mt N/a;居民饮食结构正由以植物源食物为主的低氮消费模式转向以动物源食物为主的高氮消费模式;食物生产过程产生的活性氮的最终归宿为大气(64.3%)、水体和深层土壤(35.7%);我国食物氮足迹与人均可支配收入、城市化率、动物源食物消费氮占比呈正相关性,与恩格尔系数呈负相关性;未来10 a我国人均食物氮足迹呈增长趋势,预测结果显示年均增幅为0.16 kg N/a。

A review of monitoring,calculation,and simulation methods for ground subsidence induced by coal mining

Subsidence data acquisition methods are crucial to mining subsidence research and an essential component of achieving the goal of environmentally friendly coal mining.The origin and history of the existing methods of field monitoring,calcula-tion,and simulation were introduced.It summarized and analyzed the main applications,flaws and solutions,and improve-ments of these methods.Based on this analysis,the future developing directions of subsidence data acquisition methods were prospected and suggested.The subsidence monitoring methods have evolved from conventional ground monitoring to combined methods involving ground-based,space-based,and air-based measurements.While the conventional methods are mature in technology and reliable in accuracy,emerging remote sensing technologies have obvious advantages in terms of reducing field workload and increasing data coverage.However,these remote sensing methods require further technological development to be more suitable for monitoring mining subsidence.The existing subsidence calculation methods have been applied to various geological and mining conditions,and many improvements have already been made.In the future,more attention should be paid to unifying the studies of calculation methods and mechanical principles.The simulation methods are quite dependent on the similarity of the model to the site conditions and are generally used as an auxiliary data source for subsidence studies.The cross-disciplinary studies between subsidence data acquisition methods and other technologies should be given serious consideration,as they can be expected to lead to breakthroughs in areas such as theories,devices,software,and other aspects.

First-principles calculations of Ni–(Co)–Mn–Cu–Ti all-d-metal Heusler alloy on martensitic transformation,mechanical and magnetic properties

The martensitic transformation,mechanical,and magnetic properties of the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) (x=0.125,0.25,0.375,0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5)[(x=0.125,y=0.125,0.25,0.375,0.5) and (x=0.125,0.25,0.375,y=0.625)]alloys were systematically studied by the first-principles calculations.For the formation energy,the martensite is smaller than the austenite,the Ni–(Co)–Mn–Cu–Ti alloys studied in this work can undergo martensitic transformation.The austenite and non-modulated (NM) martensite always present antiferromagnetic state in the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) (y<0.625) alloys.When y=0.625 in the Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) series,the austenite presents ferromagnetic state while the NM martensite shows antiferromagnetic state.Cu doping can decrease the thermal hysteresis and anisotropy of the Ni–(Co)–Mn–Ti alloy.Increasing Mn and decreasing Ti content can improve the shear resistance and normal stress resistance,but reduce the toughness in the Ni–Mn–Cu–Ti alloy.And the ductility of the Co–Cu co-doping alloy is inferior to that of the Ni–Mn–Cu–Ti and Ni–Co–Mn–Ti alloys.The electronic density of states was studied to reveal the essence of the mechanical and magnetic properties.

Design of high-performance ion-doped CoP systems for hydrogen evolution:From multi-level screening calculations to experiment

Rational design of high-performance electrocatalysts for hydrogen evolution reaction(HER)is vital for future renewable energy systems.The incorporation of foreign metal ions into catalysts can be an effective approach to optimize its performance.However,there is a lack of systematic theoretical studies to reveal the quantitative relationships at the electronic level.Here,we develop a multi-level screening methodology to search for highly stable and active dopants for CoP catalysts.The density functional theory(DFT)calculations and symbolic regression(SR)were performed to investigate the relationship between the adsorption free energy(ΔG_(H^(*)))and 10 electronic parameters.The mathematic formulas derived from SR indicate that the difference of work function(ΔΦ)between doped metal and the acceptor plays the most important role in regulatingΔG_(H^(*)),followed by the d-band center(d-BC)of doped system.The descriptor of HER can be expressed asΔG_(H^(*))=1.59×√|0.188ΔΦ+d BC+0.120|1/2-0.166 with a high determination coefficient(R^(2)=0.807).Consistent with the theoretical prediction,experimental results show that the Al-CoP delivers superior electrocatalytic HER activity with a low overpotential of75 m V to drive a current density of 10 mA cm^(-2),while the overpotentials for undoped CoP,Mo-CoP,and V-CoP are 206,134,and 83 m V,respectively.The current work proves that theΔΦis the most significant regulatory parameter ofΔG_(H^(*))for ion-doped electrocatalysts.This finding can drive the discovery of high-performance ion-doped electrocatalysts,which is crucial for electrocatalytic water splitting.

Passivation of PEA^(+)to CsPbI_(3)(110)Surface States:From the First Principles Calculations

This work investigates the effect of passivation on the electronic properties of inorganic perovskite CsPbI_(3)materials by using first-principles calculations with density functional theory(DFT).The passivation effect after the addition of Phenylethylamine(PEA+)molecule to CsPbI_(3)(110)surface is studied.The results of density of states(DOS)calculations show that the CsPbI_(3)(110)surface model with I atom terminated reveals new electronic DOS peaks(surface states)near the Fermi level.These surface states are mainly due to the contribution of I-5p orbital and are harmful to the CsPbI_(3)-based solar cells because they reduce the photoelectric conversion efficiency.The surface states near the Fermi level are significantly reduced,and the decline rate reaches 38.8%with the addition with PEA+molecule to the CsPbI3(110)surface.

Parameter calculation and result storage for phase-field simulation in α-Mg dendrite growth of Mg-5-wt% Zn alloy

Parameter calculation and result storage, as two necessary steps in phase-field simulation play an important role in ensuring the accuracy of simulation results. A strategy of parameter calculation and result storage is presented for phase-field simulation in α-Mg dendrite growth of Mg-5-wt% Zn alloy under isothermal solidification. Based on the phase diagram and empirical formulas, key parameters of the phase-field model, such as equilibrium partition coefficient k, liquidus slope m, solutal diffusion coefficient in liquid Dl, and solutal diffusion coefficient in solid Ds, can be obtained.Both structured grid method and structured point method can be used to store simulation results, but using the latter method will reduce about 60% storage space and 37.5% storage time compared with the former. Finally, convergent simulation results of α-Mg dendrite growth are obtained and they are in good agreement with the experimental results about optical micrograph, which verify the accuracy of parameters and stability of storage method.