Short-Distance Low-Power Wireless Access System

The short-distance low-power technologies for wireless access communications, including Bluetooth, Ultra-Wideband (UWB) and Wireless Fidelity (Wi-Fi), focus on the physical layer and Medium Access Control (MAC) layer. Bluetooth is a wireless protocol for exchanging data over short distances. It is an alternative to RS232 data cables. UWB is a radio technology that can be used at very low energy levels for short range. It provides flexible high-bandwidth wireless access. Wi-Fi enables the wireless connection of fast-access devices and mobile devices in Wireless Local Access Network (WLAN) and it is suitable for long distances. The standardizations of the above technologies have been developed and published soon after the emergence of these technologies. Among all the standards, Bluetooth and Wi-Fi are the most important ones.

Coal and rock fissure evolution and distribution characteristics of multi-seam mining

Henan Pingdingshan No.10 mine is prone to both coal and gas outbursts.The E_(9-10)coal seam is the main coal-producing seam but has poor quality ventilation,thus making it relatively difficult for gas extraction.The F_(15)coal seam,at its lower section,is not prone to coal and gas outbursts.The average seam separation distance of 150 m is greater than the upper limit for underside protective seam mining.Based on borehole imaging technology for field exploration of coal and rock fracture characteristics and discrete element numerical simulation,we have studied the evolution laws and distribution characteristics of the coal and rock fissure field between these two coal seams.By analysis of the influential effect of group F coal mining on the E_(9-10)coal seam,we have shown that a number of small fissures also develop in the area some 150 m above the overlying strata.The width and number of the fissures also increase with the extent of mining activity.Most of the fissures develop at a low angle or even parallel to the strata.The results show that the mining of the F_(15)coal seam has the effect of improving the permeability of the E_(9-10)coal seam.

Coupling control on pillar stress concentration and surface cracks in shallow multi-seam mining

In order to ensure safe mining and reduce surface damage in shallow multi-seam mining,the failure characteristics of interburden strata with different coal pillars offset distances between pillars in the upper and lower seams,the distribution characteristics of stress concentration in coal pillars,and the development characteristics of stratum cracks and subsidence were investigated by physical and UDEC2D simulation.Meanwhile,the effect of different coal pillar offset distances on stress concentration of coal pillar and development of stratum cracks were studied.Based on those results,a formula for safe mining and reducing surface damage was established,which provided a theoretical basis for safe and environmentally friendly mining in shallow multi-seam.According to the results,the optimal coal pillar offset distance(the side to side horizontal distance of the upper and lower coal pillars)between the upper and lower coal seams was developed to reduce the stress concentration of coal pillars and surface damage.The results of this study have been applied in Ningtiaota coal mine and have achieved good results in safe and environmentally friendly mining.

Geomechanics of subsidence above single and multi-seam coal mining

Accurate prediction of surface subsidence due to the extraction of underground coal seams is a significant challenge in geotechnical engineering. This task is further compounded by the growing trend for coal to be extracted from seams either above or below previously extracted coal seams, a practice known as multiseam mining. In order to accurately predict the subsidence above single and multi-seam longwall panels using numerical methods, constitutive laws need to appropriately represent the mechanical behaviour of coal measure strata. The choice of the most appropriate model is not always straightforward. This paper compares predictions of surface subsidence obtained using the finite element method, considering a range of well-known constitutive models. The results show that more sophisticated and numerically taxing constitutive laws do not necessarily lead to more accurate predictions of subsidence when compared to field measurements. The advantages and limitations of using each particular constitutive law are discussed. A comparison of the numerical predictions and field measurements of surface subsidence is also provided.

Lateral Stress Concentration in Localized Interlayer Rock Stratum and the Impact on Deep Multi-Seam Coal Mining

To explore the impact of lateral stress concentration in interlayer rock stratum on the exploitation of protected coal seam, a field experiment was carried out in a multi-seam mining structure. Lateral stress redistribution and interlayer rock failure behavior were surveyed. Then an assistant numerical investigation was implemented to evolve the effect of liberated seam mining and its influence on stress reconstruction in surrounding rock mass. The cause of lateral stress concentration and its impact were discussed finally. Key findings turn out that a certain lateral stress increases in interlayer rock stratum and concentrates on its lower region. Lateral stress concentration and interlayer rock failure are interactional. The former is an inducing factor of the latter;the latter promotes the increase of concentration degree. Extent of lateral stress concentration increases to the maximum as seam distance is about 50 m. But the efficacy of liberated seam mining decreases as the seam spacing gets larger. Protected seam mining is then classified based upon the impact of lateral stress concentration, which helps to prevent the rock burst hazard and then to achieve a reliable mining in deep mines.

Study on the disaster caused by the linkage failure of the residual coal pillar and rock stratum during multiple coal seam mining:mechanism of progressive and dynamic failure

Multi-seam mining often leads to the retention of a significant number of coal pillars for purposes such as protection,safety,or water isolation.However,stress concentration beneath these residual coal pillars can significantly impact their strength and stability when mining below them,potentially leading to hydraulic support failure,surface subsidence,and rock bursting.To address this issue,the linkage between the failure and instability of residual coal pillars and rock strata during multi-seam mining is examined in this study.Key controls include residual pillar spalling,safety factor(f.),local mine stiffness(LMS),and the post-peak stiffness(k)of the residual coal pillar.Limits separating the two forms of failure,progressive versus dynamic,are defined.Progressive failure results at lower stresses when the coal pillar transitions from indefinitely stable(f,>1.5)to failing(f,<1.5)when the coal pillar can no longer remain stable for an extended duration,whereas sud-den(unstable)failure results when the strength of the pillar is further degraded and fails.The transition in mode of failure is defined by the LMS/k ratio.Failure transitions from quiescent to dynamic as LMS/k.<1,which can cause chain pillar instability propagating throughout the mine.This study provides theoretical guidance to define this limit to instability of residual coal pillars for multi-seam mining in similar mines.

The recording of digital hologram at short distance and reconstruction using convolution approach

By adopting in-line lensless Fourier setup and phase-shifting technique, we recorded the phase-shifting digital hologram at short distance. As the Fresnel diffraction condition is no longer valid, the convolution approach is chosen for the reconstruction. However, the simulated reference wave for the reconstruction would suffer from severe undersampling due to the comparatively large pixel size. To solve this problem, sine-interpolation is introduced to get the pixel-size of the hologram reduced prior to the reconstruction. The experimental results show that an object image of high fidelity is obtained with this method.

A method for identifying coalbed methane co-production interference based on production characteristic curves: A case study of the Zhijin block, western Guizhou, China

Efficient detection of coalbed methane(CBM) co-production interference is the key to timely adjusting the development plan and improving the co-production efficiency. Based on production data of six typical CBM co-production wells in the Zhijin block of western Guizhou Province, China, the production characteristic curves, including production indication curve, curve of daily water production per unit drawdown of producing fluid level with time, and curve of water production per unit differential pressure with time have been analyzed to explore the response characteristics of co-production interference on the production characteristic curves. Based on the unit water inflow data of pumping test in coal measures, the critical value of in-situ water production of the CBM wells is 2 m^(3)/(d·m). The form and the slope of the initial linear section of the production indication curves have clear responses to the interference, which can be used to discriminate internal water source from external water source based on the critical slope value of 200 m^(3)/MPa in the initial linear section of the production indication curve. The time variation curves of water production per unit differential pressure can be divided into two morphological types: up-concave curve and down-concave curve. The former is represented by producing internal water with average daily gas production greater than 800 m^(3)/d, and the latter produces external water with average daily gas production smaller than 400 m^(3)/d. The method and critical indexes for recognition of CBM co-production interference based on the production characteristic curve are constructed. A template for discriminating interference of CBM co-production was constructed combined with the gas production efficiency analysis, which can provide reference for optimizing co-production engineering design and exploring economic and efficient co-production mode.

Ordered exponential and its features in Yang-Mills effective action

In this paper,we discuss some non-trivial relations for ordered exponentials on smooth Riemannian manifolds.As an example of application,we study the dependence of the four-dimensional quantum Yang–Mills effective action on the special gauge transformation with respect to the background field.Also,we formulate some open questions about a structure of divergences for a special type of regularization in the presence of the background field formalism.

Monitoring and evaluation of disaster risk caused by linkage failure and instability of residual coal pillar and rock strata in multi-coal seam mining

Comprehensive research methods such as literature research,theoretical analysis,numerical simulations and field monitoring have been used to analyze the disasters and characteristics caused by the linkage failure and instability of the residual coal pillars-rock strata in multi-seam mining.The effective monitoring area and monitoring design method of linkage instability of residual coal pillar-rock strata in multi-seam mining have been identified.The evaluation index and the risk assessment method of disaster risk have been established and the project cases have been applied and validated.The results show that:①The coal pillar will not only cause disaster in singleseam mining,but also more easily cause disaster in multi-seam mining.The instability of coal pillars can cause not only dynamical disasters such as rock falls and mine earthquakes,but also cause surface subsidence and other disasters.②When monitoring the linkage instability of residual coal pillar-rock strata,it is not only necessary to consider the monitoring of the apply load body(key block),the transition body(residual coal pillar)and the carrier body(interlayer rock and working face),but also to strengthen the monitoring of the fracture development height(linkage body).③According to the principles of objectivity,easy access and quantification,combined with investigation,analysis,and production and geological characteristics of this mining area,the main evaluation indexes of the degree of disaster caused by linkage instability of residual coal pillar-rock strata are determined as:microseismic energy,residual coal pillar damage degree,fracture development height.And the evaluation index classification table was also given.④According to the measured value of the evaluation index,the fuzzy comprehensive evaluation method was used to calculate the disaster risk degree in the studied mine belongs to class III,that is,medium risk level.The corresponding pressure relief technology was adopted on site,which achieved a good control effect,and also verified the accuracy and effectiveness of the risk evaluation results.

Bus evacuation during no-notice disasters in downtown areas: A case study of the Zhongguancun area, Beijing

This paper focuses on the bus evacuation problem with pedestrians’short-distance walking ability between bus stations during no-notice disasters in downtown areas.A mixed-integer linear programming model is proposed to solve this problem.The objective function is to minimize the evacuation time and number of casualties.The model obtains the flow of evacuees and buses on each arc to the route of buses in the process of evacuation.Furthermore,a real-time bus evacuation demand estimation method is proposed based on smart card data.Finally,the example of Zhongguancun area in Beijing is used to verify the practicality and validity of the model.The results show that pedestrian short-distance walking can effectively reduce casualties and improve the utilization rate of buses.