This paper investigates the effects of tool holder materials on chatter vibration in turning operations.The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system.Tool...This paper investigates the effects of tool holder materials on chatter vibration in turning operations.The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system.Tool holders made from different materials,including Al 5083,Al 6082,Al 7012,and a standard 4140 material,were subjected to chatter vibration to investigate their process damping capabilities.The study found that the standard tool holder 4140 allows for higher stable depths of cut and produces similar process damping values compared to the other tool holders.Finite element analyses(FEA)were performed to verify the experimental results,and the modal and FEA analyses produced very similar results.The study concludes that future research should investigate the effects of tool holders made from high alloy steel alloys on process damping.Overall,this paper provides important insights into the effects of tool hold-er materials on chatter vibration and process damping in turning operations,which can help in the design of more effi-cient and effective cutting systems.展开更多
A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic mo...A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established,and the optimal damping ratio,optimal frequency ratio,and maximum relative amplitude were derived.Modal analysis of the passive damping vibrationreduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.展开更多
Though the lengthened shrink-fit holder (LSFH) is widely applied in high speed milling of the parts characterized by deep cavities at present, its design and selection mainly depends on the experience and lacks a corr...Though the lengthened shrink-fit holder (LSFH) is widely applied in high speed milling of the parts characterized by deep cavities at present, its design and selection mainly depends on the experience and lacks a correct theoretical guidance. In this paper, attention is focus on the radial grip rigidity of the matching of LSFH and cutter in high speed milling. Based on the experiment modal analysis (EMA) technique, an accurate finite element model of the matching of LSFH and cutter is established firstly. Subsequently, the influence of different interference, grip length and spindle speed on the grip rigidity of LSFH are analyzed. The analysis results show that there is a reasonable interference and grip length between the LSFH and cutter so that to have a steepless grip and have a good radial grip rigidity and at the same time to avoid the strength of LSFH to exceed it’s yield limit which will reduce the precision and service life of LSFH, besides when spindle speed reach a extension the weakening influence of the centrifugal force on the radial grip rigidity of the matching of LSFH and cutter should been taken into account. Finally, the finite element analysis results are verified based on the construction of measurement method of the grip rigidity and the results fit very well. The studies provide a theoretical basis for the design, selection and the serialization and standardization of the matching of LSFH and cutter.展开更多
基金This study was supported by the Scientific Research Coordination Unit of Pamukkale University under the project number 2011BSP020.
文摘This paper investigates the effects of tool holder materials on chatter vibration in turning operations.The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system.Tool holders made from different materials,including Al 5083,Al 6082,Al 7012,and a standard 4140 material,were subjected to chatter vibration to investigate their process damping capabilities.The study found that the standard tool holder 4140 allows for higher stable depths of cut and produces similar process damping values compared to the other tool holders.Finite element analyses(FEA)were performed to verify the experimental results,and the modal and FEA analyses produced very similar results.The study concludes that future research should investigate the effects of tool holders made from high alloy steel alloys on process damping.Overall,this paper provides important insights into the effects of tool hold-er materials on chatter vibration and process damping in turning operations,which can help in the design of more effi-cient and effective cutting systems.
基金Science and Technology Research Project of Liaoning Provincial Department of Education:Research on the Application of Damping and Vibration Reduction Technology in Key Components of Machine Tools(JYTMS20230066)The Fund of Liaoning Provincial Natural Science and Technology Foundation Regional Joint(No.2021-YKLH-08).
文摘A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established,and the optimal damping ratio,optimal frequency ratio,and maximum relative amplitude were derived.Modal analysis of the passive damping vibrationreduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2009AA44302)Scientific Research Fund of Hunan Provincial Education Department, China (Grant No. 10C1259)+2 种基金Hunan Provincial Planned Science and Technology Project of China (Grant No. 2011FJ3231)National Natural Science Foundation of China (Grant No. 51005194)Open Innovation Platform of Hunan College Fund, China (Grant No. 10K063)
文摘Though the lengthened shrink-fit holder (LSFH) is widely applied in high speed milling of the parts characterized by deep cavities at present, its design and selection mainly depends on the experience and lacks a correct theoretical guidance. In this paper, attention is focus on the radial grip rigidity of the matching of LSFH and cutter in high speed milling. Based on the experiment modal analysis (EMA) technique, an accurate finite element model of the matching of LSFH and cutter is established firstly. Subsequently, the influence of different interference, grip length and spindle speed on the grip rigidity of LSFH are analyzed. The analysis results show that there is a reasonable interference and grip length between the LSFH and cutter so that to have a steepless grip and have a good radial grip rigidity and at the same time to avoid the strength of LSFH to exceed it’s yield limit which will reduce the precision and service life of LSFH, besides when spindle speed reach a extension the weakening influence of the centrifugal force on the radial grip rigidity of the matching of LSFH and cutter should been taken into account. Finally, the finite element analysis results are verified based on the construction of measurement method of the grip rigidity and the results fit very well. The studies provide a theoretical basis for the design, selection and the serialization and standardization of the matching of LSFH and cutter.
