The magnetic properties and the magnetic entropy change AS have been investigated for Gd6Co1.67Si3 compounds with a second-order phase transition. The saturation moment at 5 K and the Curie temperature TC are 38.1μB ...The magnetic properties and the magnetic entropy change AS have been investigated for Gd6Co1.67Si3 compounds with a second-order phase transition. The saturation moment at 5 K and the Curie temperature TC are 38.1μB and 298 K, respectively. The AS originates from a reversible second-order magnetic transition around TC and its value reaches 5.2 J/kg.K for a magnetic field change from 0 to 5T. The refrigerant capacity （RC） of Gd6Co1.67Si3 are calculated by using the methods given in Refs.[12] and [21], respectively, for a field change of 0 5T and its values are 310 and 440 J/kg, which is larger than those of some magnetocaloric materials with a first-order phase transition.展开更多
Magnetic properties and magnetocaloric effects of Tb6Coi.67Si3 have been investigated by magnetization measurement. This compound is of a hexagonal Ce6Ni2Si3-type structure with a saturation magnetization of 187emu/g ...Magnetic properties and magnetocaloric effects of Tb6Coi.67Si3 have been investigated by magnetization measurement. This compound is of a hexagonal Ce6Ni2Si3-type structure with a saturation magnetization of 187emu/g at 5 K and a reversible second-order magnetic transition at Curie temperature TC = 186K. A magnetic entropy change △S = 7J·kg^-1·K^-1 is observed for a magnetic field change from 0 to 5T. A large value of refrigerant capacity （RC） is found to be 330 J/kg for fields ranging from 0 to ST. The large RC, the reversible magnetization around Tc and the easy fabrication make the Tb6Co1.67Si3 compound a suitable candidate for magnetic refrigerants in a corresponding temperature range.展开更多
Solid liquid state pressure bonding of Si 3N 4 ceramics with aluminum based alloys, which contain a small amount of intermetallic compounds Al 3Ti or Al 3Zr, was investigated. With this new method, the heat resistant ...Solid liquid state pressure bonding of Si 3N 4 ceramics with aluminum based alloys, which contain a small amount of intermetallic compounds Al 3Ti or Al 3Zr, was investigated. With this new method, the heat resistant properties of the bonding zone metal are improved, and the joints’ strengths at high temperature is increased. The joints’ shear strength at room temperature and at 600 ℃ reach 126～133 MPa and 32～34 MPa, respectively, with suitable bonding pressure. The reaction between aluminum and Si 3N 4 ceramics, which produces Al Si N O type compounds is the dominant interfacial reaction, while the reactions between the second active element Ti or Zr in the aluminum based alloys and Si 3N 4 ceramics also occur to some extend. [展开更多
The Cu-Ti-Si alloys containing in-situ formed Ti5Si3 are prepared. In order to clarify the Ti5Si3 formation processes and its microstructure characteristics, the as-cast and deeply etched Cu-Ti-Si alloys with differen...The Cu-Ti-Si alloys containing in-situ formed Ti5Si3 are prepared. In order to clarify the Ti5Si3 formation processes and its microstructure characteristics, the as-cast and deeply etched Cu-Ti-Si alloys with different compositions and cooling rates were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). It is found that the eutectic Ti5Si3 phases in Cu-Ti-Si alloys are rod-like with hexagonal cross section which tend to intertwine with each other to form a firm skeleton like a bird nest structure which can make the alloys keep their original shape even after etching off the Cu matrix. In addition, there is Cu in the center of many Ti5Si3 rods, resulting in a core-shell structure. With the increase of the cooling rate, Ti5Si3 distributes more uniformly, and the diameter of Ti5Si3 significantly decreases, with a minimum size of less than 100 nm, while the aspect ratio of Ti5Si3 increases.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos 50571112 and 50731007)the National Basic Research Program of China (Grant No 2006CB601101)the Basic Research Program of Chinese Academy of Sciences, China (Grant No KJCX2-YW-W02)
文摘The magnetic properties and the magnetic entropy change AS have been investigated for Gd6Co1.67Si3 compounds with a second-order phase transition. The saturation moment at 5 K and the Curie temperature TC are 38.1μB and 298 K, respectively. The AS originates from a reversible second-order magnetic transition around TC and its value reaches 5.2 J/kg.K for a magnetic field change from 0 to 5T. The refrigerant capacity （RC） of Gd6Co1.67Si3 are calculated by using the methods given in Refs.[12] and [21], respectively, for a field change of 0 5T and its values are 310 and 440 J/kg, which is larger than those of some magnetocaloric materials with a first-order phase transition.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 50571112 and 50731007）, the National Basic Research Program of China （Grant No 2006CB601101） and the Basic Research Program of Chinese Academy of Sciences （Grant No KJCX2-YW-W02）.
文摘Magnetic properties and magnetocaloric effects of Tb6Coi.67Si3 have been investigated by magnetization measurement. This compound is of a hexagonal Ce6Ni2Si3-type structure with a saturation magnetization of 187emu/g at 5 K and a reversible second-order magnetic transition at Curie temperature TC = 186K. A magnetic entropy change △S = 7J·kg^-1·K^-1 is observed for a magnetic field change from 0 to 5T. A large value of refrigerant capacity （RC） is found to be 330 J/kg for fields ranging from 0 to ST. The large RC, the reversible magnetization around Tc and the easy fabrication make the Tb6Co1.67Si3 compound a suitable candidate for magnetic refrigerants in a corresponding temperature range.
文摘Solid liquid state pressure bonding of Si 3N 4 ceramics with aluminum based alloys, which contain a small amount of intermetallic compounds Al 3Ti or Al 3Zr, was investigated. With this new method, the heat resistant properties of the bonding zone metal are improved, and the joints’ strengths at high temperature is increased. The joints’ shear strength at room temperature and at 600 ℃ reach 126～133 MPa and 32～34 MPa, respectively, with suitable bonding pressure. The reaction between aluminum and Si 3N 4 ceramics, which produces Al Si N O type compounds is the dominant interfacial reaction, while the reactions between the second active element Ti or Zr in the aluminum based alloys and Si 3N 4 ceramics also occur to some extend. [
基金This work was financially supported by the Natural Science Foundation of Hebei Province of China(Grant No.E2019502057)the Fundamental Research Funds for the Central Universities,China(Grant No.2018MS120).
文摘The Cu-Ti-Si alloys containing in-situ formed Ti5Si3 are prepared. In order to clarify the Ti5Si3 formation processes and its microstructure characteristics, the as-cast and deeply etched Cu-Ti-Si alloys with different compositions and cooling rates were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). It is found that the eutectic Ti5Si3 phases in Cu-Ti-Si alloys are rod-like with hexagonal cross section which tend to intertwine with each other to form a firm skeleton like a bird nest structure which can make the alloys keep their original shape even after etching off the Cu matrix. In addition, there is Cu in the center of many Ti5Si3 rods, resulting in a core-shell structure. With the increase of the cooling rate, Ti5Si3 distributes more uniformly, and the diameter of Ti5Si3 significantly decreases, with a minimum size of less than 100 nm, while the aspect ratio of Ti5Si3 increases.
