Wetting of molten Sn-3.5Ag-0.5Cu on Ni-P(-SiC) coatings deposited on high volume faction SiC/Al composite

The wetting of molten Sn-3.5Ag-0.5Cu alloy on the Ni-P(-SiC)coated SiCp/Al substrates was investigated by electroless Ni plating process,and the microstructures of the coating and the interfacial behavior of wetting systems were analyzed.The SiC particles are evenly distributed in the coating and enveloped with Ni.No reaction layer is observed at the coating/SiCp/Al composite interfaces.The contact angle increases from^19°with the Ni-P coating to 29°,43°and 113°with the corresponding Ni-P-3SiC,Ni-P-6SiC and Ni-P-9SiC coatings,respectively.An interaction layer containing Cu,Ni,Sn and P forms at the Sn-Ag-Cu/Ni-P-(0,3,6)SiC coated SiCp/Al interfaces,and the Cu-Ni-Sn and Ni-Sn-P phases are detected in the interaction layer.Moreover,the molten Sn-Ag-Cu can penetrate into the Ni-P(-SiC)coatings through the Ni-P/SiC interface and dissolve them to contact the SiCp/Al substrate.

SiC_p/Cu合金电子封装壳体半固态成形模拟

采用有限元软件Deform-3DTM对SiCp/Cu合金电子封装壳体的触变成形过程进行了数值模拟。对触变成形过程中坯料的单元体网格变化、金属流动速度场、等效应力场及挤压杆速度对等效应力的影响等进行了分析。模拟结果表明,在半固态温度为910℃、挤压杆速度为100mm/s时,可以得到SiCp含量较高且分布较均匀的SiCp/Cu合金电子封装壳体,且能满足电子封装壳体的要求。