Supermacroporous composite cryogels embedded with SiO2 nanoparticles were prepared by radical cryogenic copolymerization of the reactive monomer mixture of acrylamide（AAm） and N,N-methylene-bis-acrylamide（MBAAm） c...Supermacroporous composite cryogels embedded with SiO2 nanoparticles were prepared by radical cryogenic copolymerization of the reactive monomer mixture of acrylamide（AAm） and N,N-methylene-bis-acrylamide（MBAAm） containing SiO2 nanoparticles（mass ratios of nanoparticles to the monomer AAm from 0.01 to 0.08） under the freezing-temperature variation condition in glass columns.The properties of these composite cryogels were measured.The height equivalent to theoretical plate（HETP） of the cryogel beds at different liquid flow rates was determined by residence time distribution（RTD） using tracer pulse-response method.The composite cryogel matrix embedded with the mass fraction of SiO2 nanoparticles of 0.02 presented the best properties and was employed in the following graft polymerization.Chromatographic process of lysozyme in the composite cryogel grafted with 2-acrylamido-2-methyl-1-propanesulfonic acid（AMPSA） was carried out to evaluate the protein breakthrough and elution characteristics.The chromatography can be carried out at relatively high superficial velocity,i.e.,15 cm·min-1,indicating the satisfactory mechanical strength due to the embedded nanoparticles.展开更多
Ablation under oxyacetylene torch with heat flux of 4186.8（10%kW/m2 for 20 s was performed to evaluate the ablation resistance of C/C-SiC composites fabricated by chemical vapor infiltration（CVI） combined with liqu...Ablation under oxyacetylene torch with heat flux of 4186.8（10%kW/m2 for 20 s was performed to evaluate the ablation resistance of C/C-SiC composites fabricated by chemical vapor infiltration（CVI） combined with liquid silicon infiltration（LSI） process.The results indicated that C/C-SiC composites present a better ablation resistance than C/C composites without doped SiC.The doped SiC and the ablation products SiO2 derived from it play key roles in ablation process.Bulk quantities of SiO2 nanowires with diameter of 80 nm-150 nm and length of tens microns were observed on the surface of specimens after ablation.The growth mechanism of the SiO_2 nanowires was interpreted with a developed vapor-liquid-solid（VLS） driven by the temperature gradient.展开更多
Functionalized PS/SiO_2 composite nanoparticles bearing sulfonic groups on the surface were successfully synthesized via emulsion copolymerization using a polymerizable emulsifierαolefin solfonate(AOS).As demonstrate...Functionalized PS/SiO_2 composite nanoparticles bearing sulfonic groups on the surface were successfully synthesized via emulsion copolymerization using a polymerizable emulsifierαolefin solfonate(AOS).As demonstrated by transmission electron microscopy and atomic force microscopy,well-defined core-shell PS/SiO_2 composite nanoparticles with a diameter of 50 nm were obtained.Sulfonic groups introduced onto the surface of the composite nanoparticles were quantified by FTIR,and can be controlled to some exten...展开更多
The micro/nano-scale indentation tests were performed to explore the performance of bisphenol-α-glycidyl methacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) dental resin composites. The effect of the fi...The micro/nano-scale indentation tests were performed to explore the performance of bisphenol-α-glycidyl methacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) dental resin composites. The effect of the filling content of nano-SiO2 particles on the mechanical properties of the dental composites was studied as well. The experimental results showed that the incorporation of the nano-SiO2 particles at low concentrations (up to 10 wt.%) can apparently increase the hardness and elastic modulus of the dental rein composites. The plasticity index indicates a best elastic recovery capability at a proper amount (4 wt.%) of the nanoparticles. Combined with the infrared spectrum, the mechanical enhancement mechanisms of the dental resin composites were analyzed.展开更多
The perfluorosulfonic acid （PFSA）/SiO2 composite catalysts were prepared by sol-gel method. Differences concerning pore structure analysis of PFSA/SiO2 catalysts were discussed on the basis of nitrogen adsorption. T...The perfluorosulfonic acid （PFSA）/SiO2 composite catalysts were prepared by sol-gel method. Differences concerning pore structure analysis of PFSA/SiO2 catalysts were discussed on the basis of nitrogen adsorption. Their surface area and pore size distributions were evaluated by Brunauer-Emmett-Teller （BET） and Barrett-Joyner-Halenda （BJH） methods, respectively. The nitrogen adsorption-desorption isotherms associated with adsorption hysteresis of PFSA/SiO2 catalysts were analyzed in detail. The adsorption isotherms of PFSA/SiOe catalysts belonged to Type IV isotherms accompanied by hysteresis loops of Type H1 for PFSA/SiO2 catalysts with content of 5%, 13% and 20% PFSA （PFSA-5, PFSA-13 and PFSA-20）, and the hysteresis loop of Type H2 for PFSA/SiO2 catalyst with 40% PFSA content （PFSA-40）. It indicated that PFSA-5, PFSA-13 and PFSA-20 catalysts had narrow pore size distributions and the well-defined cylindrical pores, while PFSA-40 catalyst had wide pore size distribution and inkbottle-like pores. The pore structure of PFSA-40 catalyst from the analysis of the hysteresis loop was not in agreement with that from BJH method. As an emendation for evaluation of pore size distributions of PFSA/SiOz catalysts, the comparison plots method was introduced, which was helpful to evaluate the pore structure of PFSA/SiO2 catalysts more factually.展开更多
In the present work, structure changes during （SiO2） composites have been investigated systematically stretching of isotactic polypropylene （iPP） and iPP/silicon dioxide The or-form crystal structure of both iPP a...In the present work, structure changes during （SiO2） composites have been investigated systematically stretching of isotactic polypropylene （iPP） and iPP/silicon dioxide The or-form crystal structure of both iPP and iPP/SiO2 composites is destroyed and transforms into the mesophase as the samples are stretched at a low temperature （35℃）, while stretching at high temperatures （90℃ and 120℃） can restrain the appearance of defects and keep the perfection of crystal structure. FTIR results reveal that the stretching temperatures show no obvious difference of the effect on the orientation of pure iPP, however, the orientation of iPP/SiO2 composites is greatly changed by the tensile temperature. In the case of micron-sized SiO2 particles （average particle diameter d 〉 1 μm）, the orientation of the composites is lower than that of pure iPP at all stretching temperatures. The above results suggest that the stretching temperature and the SiO2 particle size have great influence on the structure variation and orientation behavior of iPP/SiO2 composites.展开更多
A series of Al=-（Alq3）l-x granular films is prepared on Si wafer with native oxide layer using co-evaporation technique. Large lateral photovoltaic effect （LPE） is observed, with an optimal LPV sensitivity of 75 m...A series of Al=-（Alq3）l-x granular films is prepared on Si wafer with native oxide layer using co-evaporation technique. Large lateral photovoltaic effect （LPE） is observed, with an optimal LPV sensitivity of 75 mV/mm in x=0.35 sample. The dependence of LPE on temperature and A1 composition is investigated, and the possible mechanism is discussed.展开更多
Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chem...Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.展开更多
基金Supported by the National Natural Science Foundation of China（20876145） the Natural Science Foundation of Zhejiang Province（Y4080329）
文摘Supermacroporous composite cryogels embedded with SiO2 nanoparticles were prepared by radical cryogenic copolymerization of the reactive monomer mixture of acrylamide（AAm） and N,N-methylene-bis-acrylamide（MBAAm） containing SiO2 nanoparticles（mass ratios of nanoparticles to the monomer AAm from 0.01 to 0.08） under the freezing-temperature variation condition in glass columns.The properties of these composite cryogels were measured.The height equivalent to theoretical plate（HETP） of the cryogel beds at different liquid flow rates was determined by residence time distribution（RTD） using tracer pulse-response method.The composite cryogel matrix embedded with the mass fraction of SiO2 nanoparticles of 0.02 presented the best properties and was employed in the following graft polymerization.Chromatographic process of lysozyme in the composite cryogel grafted with 2-acrylamido-2-methyl-1-propanesulfonic acid（AMPSA） was carried out to evaluate the protein breakthrough and elution characteristics.The chromatography can be carried out at relatively high superficial velocity,i.e.,15 cm·min-1,indicating the satisfactory mechanical strength due to the embedded nanoparticles.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20110006110025)the National Natural Science Foundation of China(Grant No.U1134102)
文摘Ablation under oxyacetylene torch with heat flux of 4186.8（10%kW/m2 for 20 s was performed to evaluate the ablation resistance of C/C-SiC composites fabricated by chemical vapor infiltration（CVI） combined with liquid silicon infiltration（LSI） process.The results indicated that C/C-SiC composites present a better ablation resistance than C/C composites without doped SiC.The doped SiC and the ablation products SiO2 derived from it play key roles in ablation process.Bulk quantities of SiO2 nanowires with diameter of 80 nm-150 nm and length of tens microns were observed on the surface of specimens after ablation.The growth mechanism of the SiO_2 nanowires was interpreted with a developed vapor-liquid-solid（VLS） driven by the temperature gradient.
基金supported by the Hi-Tech Research and Development Program of China(863,No2006AA03Z562)
文摘Functionalized PS/SiO_2 composite nanoparticles bearing sulfonic groups on the surface were successfully synthesized via emulsion copolymerization using a polymerizable emulsifierαolefin solfonate(AOS).As demonstrated by transmission electron microscopy and atomic force microscopy,well-defined core-shell PS/SiO_2 composite nanoparticles with a diameter of 50 nm were obtained.Sulfonic groups introduced onto the surface of the composite nanoparticles were quantified by FTIR,and can be controlled to some exten...
文摘The micro/nano-scale indentation tests were performed to explore the performance of bisphenol-α-glycidyl methacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) dental resin composites. The effect of the filling content of nano-SiO2 particles on the mechanical properties of the dental composites was studied as well. The experimental results showed that the incorporation of the nano-SiO2 particles at low concentrations (up to 10 wt.%) can apparently increase the hardness and elastic modulus of the dental rein composites. The plasticity index indicates a best elastic recovery capability at a proper amount (4 wt.%) of the nanoparticles. Combined with the infrared spectrum, the mechanical enhancement mechanisms of the dental resin composites were analyzed.
基金supported by the National Basic Research Program of China (2003CB615705)Chemistry & Chemical Technology Research Center Plan of Shanghai Huayi Group Company (A200-8608 and A200-80726)
文摘The perfluorosulfonic acid （PFSA）/SiO2 composite catalysts were prepared by sol-gel method. Differences concerning pore structure analysis of PFSA/SiO2 catalysts were discussed on the basis of nitrogen adsorption. Their surface area and pore size distributions were evaluated by Brunauer-Emmett-Teller （BET） and Barrett-Joyner-Halenda （BJH） methods, respectively. The nitrogen adsorption-desorption isotherms associated with adsorption hysteresis of PFSA/SiO2 catalysts were analyzed in detail. The adsorption isotherms of PFSA/SiOe catalysts belonged to Type IV isotherms accompanied by hysteresis loops of Type H1 for PFSA/SiO2 catalysts with content of 5%, 13% and 20% PFSA （PFSA-5, PFSA-13 and PFSA-20）, and the hysteresis loop of Type H2 for PFSA/SiO2 catalyst with 40% PFSA content （PFSA-40）. It indicated that PFSA-5, PFSA-13 and PFSA-20 catalysts had narrow pore size distributions and the well-defined cylindrical pores, while PFSA-40 catalyst had wide pore size distribution and inkbottle-like pores. The pore structure of PFSA-40 catalyst from the analysis of the hysteresis loop was not in agreement with that from BJH method. As an emendation for evaluation of pore size distributions of PFSA/SiOz catalysts, the comparison plots method was introduced, which was helpful to evaluate the pore structure of PFSA/SiO2 catalysts more factually.
基金financially supported by the National Natural Science Foundation of China (Nos. 51073004 and 21074141)the China National Funds for Distinguished Young Scientists (No. 50925313)
文摘In the present work, structure changes during （SiO2） composites have been investigated systematically stretching of isotactic polypropylene （iPP） and iPP/silicon dioxide The or-form crystal structure of both iPP and iPP/SiO2 composites is destroyed and transforms into the mesophase as the samples are stretched at a low temperature （35℃）, while stretching at high temperatures （90℃ and 120℃） can restrain the appearance of defects and keep the perfection of crystal structure. FTIR results reveal that the stretching temperatures show no obvious difference of the effect on the orientation of pure iPP, however, the orientation of iPP/SiO2 composites is greatly changed by the tensile temperature. In the case of micron-sized SiO2 particles （average particle diameter d 〉 1 μm）, the orientation of the composites is lower than that of pure iPP at all stretching temperatures. The above results suggest that the stretching temperature and the SiO2 particle size have great influence on the structure variation and orientation behavior of iPP/SiO2 composites.
基金supported by the National Natural Science Foundation of China under Grant No.61076093
文摘A series of Al=-（Alq3）l-x granular films is prepared on Si wafer with native oxide layer using co-evaporation technique. Large lateral photovoltaic effect （LPE） is observed, with an optimal LPV sensitivity of 75 mV/mm in x=0.35 sample. The dependence of LPE on temperature and A1 composition is investigated, and the possible mechanism is discussed.
基金supported by the National Natural Science Foundation of China(Grant Nos.52105427,U2037205,52005041,51575053,and 51775047)Research Foundation from Ministry of Education of China(Grant No.6141A02033123)+2 种基金Beijing Municipal Commission of Education(Grant No.KM201910005003)Knowledge Innovation Program of Wuhan-Basic Research(Grant No.2022010801010349)Scientific Research Project of Hubei Provincial Department of Education(Grant No.B2022055)。
文摘Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.
