Phenolic resin(PF) and nano-SiO2 were used to improve the curing property and high humidity resistance of epoxy resin (EP) and methyl nadic anhydride (MNA) resistor paint, respectively. Hydrogen bonds, formed between ...Phenolic resin(PF) and nano-SiO2 were used to improve the curing property and high humidity resistance of epoxy resin (EP) and methyl nadic anhydride (MNA) resistor paint, respectively. Hydrogen bonds, formed between phenolic resin and nano-SiO2 in alcohol, made nano-SiO2 disperse easily in EP/MNA paint through phenolic resin without being treated by supersonic vibration. When the mass ratio of PF to EP in paint is 3:7, the formed composite paint film can be cured in 2 min at 170 ℃ . When the mass ratio of nano-SiO2 to PF in paint is 3:100, the property of high humidity resistance of the composite paint is the best, meeting the requirement of varying ratio of resistance less than 0.1% after experiment on high humidity resistance. SEM analysis shows the surface of the composite paint film is smooth, glassy, tight and homogeneous, without acicular air holes.展开更多
We present a fitting calculation of energy-loss function for 26 bulk materials, including 18 pure elements （Ag, A1, Au, C, Co, Cs, Cu, Er, Fe, Ge, Mg, Mo, Nb, Ni, Pd, Pt, Si, Te） and 8 compounds （AgCl, Al2O3, AlAs,...We present a fitting calculation of energy-loss function for 26 bulk materials, including 18 pure elements （Ag, A1, Au, C, Co, Cs, Cu, Er, Fe, Ge, Mg, Mo, Nb, Ni, Pd, Pt, Si, Te） and 8 compounds （AgCl, Al2O3, AlAs, CdS, SiO2, ZnS, ZnSe, ZnTe） for application to surface electron spectroscopy analysis. The experimental energy-loss function, which is derived from measured optical data, is fitted into a finite sum of formula based on the Drude-Lindhard dielectric model. By checking the oscillator strength-sum and perfect- screening-sum rules, we have validated the high accuracy of the fitting results. Further-more, based on the fitted parameters, the simulated reflection electron energy-loss spec- troscopy （REELS） spectrum shows a good agreement with experiment. The calculated fitting parameters of energy loss function are stored in an open and online database at http：//micro.ustc.edu.cn/ELF/ELF.html.展开更多
XRD,TEM,ED,and NMR analyzed four types of blast furnace slags (BFS) with different structures in this paper. The composition requirement for phase separation in BFS glass phase was then put forward,that is the composi...XRD,TEM,ED,and NMR analyzed four types of blast furnace slags (BFS) with different structures in this paper. The composition requirement for phase separation in BFS glass phase was then put forward,that is the composition of slag locates in the coexisting phase region of melilite and any silicate mineral with Q0 units. The special structure of melilite units,a 5-membered ring with high degree of polymerization (DOP),plays a key role in the formation of phase separation. In BFS system,one with chemical composition of larger ratio of (CaO + MgO/(SiO2 + Al2O3) would be more promising to meet the requirement for phase separation.展开更多
基金Supported by Science and Technology Committee of Tianjin(No06YFGPGX08400)
文摘Phenolic resin(PF) and nano-SiO2 were used to improve the curing property and high humidity resistance of epoxy resin (EP) and methyl nadic anhydride (MNA) resistor paint, respectively. Hydrogen bonds, formed between phenolic resin and nano-SiO2 in alcohol, made nano-SiO2 disperse easily in EP/MNA paint through phenolic resin without being treated by supersonic vibration. When the mass ratio of PF to EP in paint is 3:7, the formed composite paint film can be cured in 2 min at 170 ℃ . When the mass ratio of nano-SiO2 to PF in paint is 3:100, the property of high humidity resistance of the composite paint is the best, meeting the requirement of varying ratio of resistance less than 0.1% after experiment on high humidity resistance. SEM analysis shows the surface of the composite paint film is smooth, glassy, tight and homogeneous, without acicular air holes.
文摘We present a fitting calculation of energy-loss function for 26 bulk materials, including 18 pure elements （Ag, A1, Au, C, Co, Cs, Cu, Er, Fe, Ge, Mg, Mo, Nb, Ni, Pd, Pt, Si, Te） and 8 compounds （AgCl, Al2O3, AlAs, CdS, SiO2, ZnS, ZnSe, ZnTe） for application to surface electron spectroscopy analysis. The experimental energy-loss function, which is derived from measured optical data, is fitted into a finite sum of formula based on the Drude-Lindhard dielectric model. By checking the oscillator strength-sum and perfect- screening-sum rules, we have validated the high accuracy of the fitting results. Further-more, based on the fitted parameters, the simulated reflection electron energy-loss spec- troscopy （REELS） spectrum shows a good agreement with experiment. The calculated fitting parameters of energy loss function are stored in an open and online database at http：//micro.ustc.edu.cn/ELF/ELF.html.
基金supported by the National Natural Science Foundation of China (Grant No.50954004)the National Science & Technology Pillar Program of China (Grant No.2007AA03Z529)
文摘XRD,TEM,ED,and NMR analyzed four types of blast furnace slags (BFS) with different structures in this paper. The composition requirement for phase separation in BFS glass phase was then put forward,that is the composition of slag locates in the coexisting phase region of melilite and any silicate mineral with Q0 units. The special structure of melilite units,a 5-membered ring with high degree of polymerization (DOP),plays a key role in the formation of phase separation. In BFS system,one with chemical composition of larger ratio of (CaO + MgO/(SiO2 + Al2O3) would be more promising to meet the requirement for phase separation.
