Garnet-type solid-state batteries(SSBs)are considered to be one of the most promising candidates to realize next-generation lithium metal batteries with high energy density and safety.However,the dendrite-induced shor...Garnet-type solid-state batteries(SSBs)are considered to be one of the most promising candidates to realize next-generation lithium metal batteries with high energy density and safety.However,the dendrite-induced short-circuit and the poor interfacial contact impeded the practical application.Herein,interface engineering to achieve low interfacial resistance without high temperature calcination was developed,which Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)was simply coated with complex hydride(Li_(4)(BH_(4))_(3)I(3L1L))in various mass ratios n(Li_(4)(BH_(4))_(3)I)-(100−n)LLZTO(10≤n≤40).The interfacial conductivity increases by more than three orders of magnitude from 8.29×10^(−6)S·cm^(−1)to 1.10×10^(−2)S·cm^(−1).Symmetric Li cells exhibit a high critical current density(CCD)of 4.0 mA·cm^(−2) and an excellent cycling stability for 200 h at 4.0 mA·cm^(−2).SSBs with polymeric sulfur-polyacrylonitrile(SPAN)cathode achieve a high discharge capacity of 1149 mAh·g^(−1) with a capacity retention of 91%after 100 cycles(0.2 C).This attempt guides a simple yet efficient strategy for obtaining a stable Li/LLZTO interface,which would promote the development of solid-state batteries.展开更多
Despite the high energy density of lithium metal batteries(LMBs),their application in rechargeable batteries is still hampered due to insufficient safety.Here,we present a novel flame-retardant solid-state electrolyte...Despite the high energy density of lithium metal batteries(LMBs),their application in rechargeable batteries is still hampered due to insufficient safety.Here,we present a novel flame-retardant solid-state electrolyte based on polyvinylidene fluoride-hexafluoropropylene(PVDF-HFP)with nano SiO_(2)aerogel as an inert filler but Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)as an auxiliary component to enhance the ion conductivity.The introduction of SiO_(2)aerogels imparts the polymer electrolyte with exceptional thermal stability and flame retardancy.Simultaneously,the interaction between hydroxyl groups of SiO_(2)particles and PVDF-HFP creates a strong cross-linking structure,enhancing the mechanical strength and stability of the electrolyte.Furthermore,the presence of SiO_(2)aerogel and LLZTO facilitates the dissociation of lithium salts through Lewis acid-base interactions,resulting in a high ionic conductivity of 1.01×10^(−3)S·cm^(−1)and a wide electrochemical window of~5.0 V at room temperature for the prepared electrolytes.Remarkably,the assembled Li|Li cell demonstrates the excellent resistance to lithium dendrite and runs stablly for over 1500 h at a current density of 0.25 mA·cm^(−2).Thus,we prepare a pouch cell with high safety,which can work normally after short-circuiting under the external folding and cutting.展开更多
NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定...NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定性好,但其立方相结构不稳定,影响其实际应用。采用溶液浇筑法,制备纯PVDF-LiTFSI电解质膜和以PVDF为基、3种不同质量比的Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)的固态电解质膜,并探讨纯PVDF-LiTFSI电解质膜和3种不同质量比的活性无机电解质填料对复合固态电解质离子电导率的影响。结果表明,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时,电解质膜的XRD图谱的衍射峰比纯PVDF-LiTFSI下降更为明显,电化学窗口为3.9 V左右,表现出更好的稳定性。在不同温度下分别测量其离子电导率发现,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时的电解质膜均高于纯PVDF-LiTFSI电解质膜和Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为2∶1和3∶1时的电解质膜。将其装配成电池后发现,0.1C下电池首次充放电比容量分别为90 m A·h/g和87 m A·h/g。以0.5C的电流循环25圈,放电比容量从57 mA·h/g衰减至51mA·h/g,容量保持率为99.7%。所以,以PVDF为基、Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1的固态电解质膜有优良的倍率性能和循环稳定性能。展开更多
The aggregation of inorganic particles with high mass ratio will form a heterogeneous electric field in the solid polymer electrolytes(SPEs),which is difficult to be compatible with lithium anode,leading to inadequate...The aggregation of inorganic particles with high mass ratio will form a heterogeneous electric field in the solid polymer electrolytes(SPEs),which is difficult to be compatible with lithium anode,leading to inadequate ionic conductivity.Herein,a facile spray drying method is adopted to increase the mass ratio of inorganic particles and solve the aggregation problems of fillers simultaneously.The polyvinylidene fluoride(PVDF)with lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)covers the surface of each Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)granules during the nebulization process,then forming flat solid electrolytes via layer-by-layer deposition.Characterized by the atomic force microscope,the obtained solid electrolytes achieve a homogenous dispersion of Young’s modulus and surface electric field.As a result,the as-prepared SPEs present high tensile strength of 7.1 MPa,high ionic conductivity of 1.86×10^(−4)S·cm^(−1)at room temperature,and wide electrochemical window up to 5.0 V,demonstrating increased mechanical strength and uniform lithium-ion migration channels for SPEs.Thanks to the as-prepared SPEs,the lithiumsymmetrical cells show a highly stable Li plating/stripping cycling for over 1,000 h at 0.1 mA·cm^(−2).The corresponding Li/LCoO_(2)batteries also present good rate capability and excellent cyclic performance with capacity retention of 80%after 100 cycles at room temperature.展开更多
基金This study was financially supported by the National Natural Science Foundation of China(Nos.52171180,51802154,and 51971065)the National Science Fund for Distinguished Young Scholars(No.51625102)+3 种基金the Innovation Program of Shanghai Municipal Education Commission(No.2019-01-07-00-07-E00028)the Fundamental Research Funds for the Central Universities(No.NG2022005)the Open Fund for Graduate Innovation Base in Nanjing University of Aeronautics and Astronautics(No.xcxjh20210612)partially supported by the Fundamental Research Funds for the Central Universities,NS2021043.
文摘Garnet-type solid-state batteries(SSBs)are considered to be one of the most promising candidates to realize next-generation lithium metal batteries with high energy density and safety.However,the dendrite-induced short-circuit and the poor interfacial contact impeded the practical application.Herein,interface engineering to achieve low interfacial resistance without high temperature calcination was developed,which Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)was simply coated with complex hydride(Li_(4)(BH_(4))_(3)I(3L1L))in various mass ratios n(Li_(4)(BH_(4))_(3)I)-(100−n)LLZTO(10≤n≤40).The interfacial conductivity increases by more than three orders of magnitude from 8.29×10^(−6)S·cm^(−1)to 1.10×10^(−2)S·cm^(−1).Symmetric Li cells exhibit a high critical current density(CCD)of 4.0 mA·cm^(−2) and an excellent cycling stability for 200 h at 4.0 mA·cm^(−2).SSBs with polymeric sulfur-polyacrylonitrile(SPAN)cathode achieve a high discharge capacity of 1149 mAh·g^(−1) with a capacity retention of 91%after 100 cycles(0.2 C).This attempt guides a simple yet efficient strategy for obtaining a stable Li/LLZTO interface,which would promote the development of solid-state batteries.
基金the National Key Research and Development Program Intergovernmental International Science and Technology Innovation Cooperation(No.2022YFE0109400)Leading Edge Technology of Jiangsu Province(Nos.BK20202008 and BK20220009)Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Despite the high energy density of lithium metal batteries(LMBs),their application in rechargeable batteries is still hampered due to insufficient safety.Here,we present a novel flame-retardant solid-state electrolyte based on polyvinylidene fluoride-hexafluoropropylene(PVDF-HFP)with nano SiO_(2)aerogel as an inert filler but Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)as an auxiliary component to enhance the ion conductivity.The introduction of SiO_(2)aerogels imparts the polymer electrolyte with exceptional thermal stability and flame retardancy.Simultaneously,the interaction between hydroxyl groups of SiO_(2)particles and PVDF-HFP creates a strong cross-linking structure,enhancing the mechanical strength and stability of the electrolyte.Furthermore,the presence of SiO_(2)aerogel and LLZTO facilitates the dissociation of lithium salts through Lewis acid-base interactions,resulting in a high ionic conductivity of 1.01×10^(−3)S·cm^(−1)and a wide electrochemical window of~5.0 V at room temperature for the prepared electrolytes.Remarkably,the assembled Li|Li cell demonstrates the excellent resistance to lithium dendrite and runs stablly for over 1500 h at a current density of 0.25 mA·cm^(−2).Thus,we prepare a pouch cell with high safety,which can work normally after short-circuiting under the external folding and cutting.
文摘NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定性好,但其立方相结构不稳定,影响其实际应用。采用溶液浇筑法,制备纯PVDF-LiTFSI电解质膜和以PVDF为基、3种不同质量比的Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)的固态电解质膜,并探讨纯PVDF-LiTFSI电解质膜和3种不同质量比的活性无机电解质填料对复合固态电解质离子电导率的影响。结果表明,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时,电解质膜的XRD图谱的衍射峰比纯PVDF-LiTFSI下降更为明显,电化学窗口为3.9 V左右,表现出更好的稳定性。在不同温度下分别测量其离子电导率发现,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时的电解质膜均高于纯PVDF-LiTFSI电解质膜和Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为2∶1和3∶1时的电解质膜。将其装配成电池后发现,0.1C下电池首次充放电比容量分别为90 m A·h/g和87 m A·h/g。以0.5C的电流循环25圈,放电比容量从57 mA·h/g衰减至51mA·h/g,容量保持率为99.7%。所以,以PVDF为基、Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1的固态电解质膜有优良的倍率性能和循环稳定性能。
基金the financial support from the National Natural Science Foundation of China(No.21805147).
文摘The aggregation of inorganic particles with high mass ratio will form a heterogeneous electric field in the solid polymer electrolytes(SPEs),which is difficult to be compatible with lithium anode,leading to inadequate ionic conductivity.Herein,a facile spray drying method is adopted to increase the mass ratio of inorganic particles and solve the aggregation problems of fillers simultaneously.The polyvinylidene fluoride(PVDF)with lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)covers the surface of each Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)granules during the nebulization process,then forming flat solid electrolytes via layer-by-layer deposition.Characterized by the atomic force microscope,the obtained solid electrolytes achieve a homogenous dispersion of Young’s modulus and surface electric field.As a result,the as-prepared SPEs present high tensile strength of 7.1 MPa,high ionic conductivity of 1.86×10^(−4)S·cm^(−1)at room temperature,and wide electrochemical window up to 5.0 V,demonstrating increased mechanical strength and uniform lithium-ion migration channels for SPEs.Thanks to the as-prepared SPEs,the lithiumsymmetrical cells show a highly stable Li plating/stripping cycling for over 1,000 h at 0.1 mA·cm^(−2).The corresponding Li/LCoO_(2)batteries also present good rate capability and excellent cyclic performance with capacity retention of 80%after 100 cycles at room temperature.
