Self-reinforced Si_3N_4 ceramics containing high oxynitride glass have beenfabricated by the control of microstructure evolution and p-Si_3N_4 grain growth. The effects of thesize distribution of the elongated p-Si_3N...Self-reinforced Si_3N_4 ceramics containing high oxynitride glass have beenfabricated by the control of microstructure evolution and p-Si_3N_4 grain growth. The effects of thesize distribution of the elongated p-Si_3N_44 grains, and the p-Si_3N_4 grain growth as well as theoxynitride glass chemical characteristic on the microstructure and mechanical properties wereinvestigated. The experimental results show that the p-Si_3N_4 grains in high oxynitride glass growto elongated rod-like crystals and form the stereo-network structure. Under the sintering conditionsof 1800 deg C and 60 min, a quite uniform microstructure with an average aspect ratio of 6.5 and anaverage of 1 mu m can be obtained. A large amount of oxynitride glass phase with high nitrogencontent enhances the elevated temperature fracture toughness because of its high softeningtemperature and high viscosity. In the present material, the crack deflection and pullout of theelongated rod-like P-Si_3N_44 grains are the primary toughening mechanisms.展开更多
The effects of Y2O3d, La2O3 and Nd2O3 on the mechanical properties and microstructures of Si3N4-hased ceramics were studied. It shows that a significant improvement in mechanical properties can be obtained by adding r...The effects of Y2O3d, La2O3 and Nd2O3 on the mechanical properties and microstructures of Si3N4-hased ceramics were studied. It shows that a significant improvement in mechanical properties can be obtained by adding rare earths oxides in Si3N4. The fracture toughness and the fie-cural strength of Si3N4 added with both Y2O3 and La2O3 are 7. 8 MPa.m1/2 and 962 MPa, respectively. The main reason is that adding rare earths in Si3N4 can improve the microstructure of the material and increase the aspect ratio of β-Si3N4 grain.展开更多
氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过...氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。展开更多
文摘Self-reinforced Si_3N_4 ceramics containing high oxynitride glass have beenfabricated by the control of microstructure evolution and p-Si_3N_4 grain growth. The effects of thesize distribution of the elongated p-Si_3N_44 grains, and the p-Si_3N_4 grain growth as well as theoxynitride glass chemical characteristic on the microstructure and mechanical properties wereinvestigated. The experimental results show that the p-Si_3N_4 grains in high oxynitride glass growto elongated rod-like crystals and form the stereo-network structure. Under the sintering conditionsof 1800 deg C and 60 min, a quite uniform microstructure with an average aspect ratio of 6.5 and anaverage of 1 mu m can be obtained. A large amount of oxynitride glass phase with high nitrogencontent enhances the elevated temperature fracture toughness because of its high softeningtemperature and high viscosity. In the present material, the crack deflection and pullout of theelongated rod-like P-Si_3N_44 grains are the primary toughening mechanisms.
基金the Science and Technology Foundation of Liaoning Province under Contract!972024, 9810600202
文摘The effects of Y2O3d, La2O3 and Nd2O3 on the mechanical properties and microstructures of Si3N4-hased ceramics were studied. It shows that a significant improvement in mechanical properties can be obtained by adding rare earths oxides in Si3N4. The fracture toughness and the fie-cural strength of Si3N4 added with both Y2O3 and La2O3 are 7. 8 MPa.m1/2 and 962 MPa, respectively. The main reason is that adding rare earths in Si3N4 can improve the microstructure of the material and increase the aspect ratio of β-Si3N4 grain.
文摘氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。
