Three dimensional shear wave velocity structure of crust and upper mantle in South China Sea and its adjacent regions by surface waveform inversion

We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). It partitions the large-scale optimization problem into a number of independent small-scale problems. We adopted surface waveform inversion with an equal block (2((2() discretization in order to acquire the images of shear velocity structure at different depths (from surface to 430 km) in the crust and upper-mantle. The resolution of all these anomalies has been established with (check-board( resolution tests. These results show significant difference in velocity, lithosphere and asthenosphere structure between South China Sea and its adjacent regions.

Intrinsic and scattering attenuations of the Sichuan-Yunnan region in China from S coda waves

Seismic attenuation is a fundamental property of the Earth's media.Attenuation structure for the complicated geological structures with strong seismicity in the Sichuan-Yunnan region is poorly studied.In this study,we collected 108,399 waveforms of 11,517 local small earthquakes with magnitudes between 1.5 and 3.5 from January 2014 to September 2021 in the Sichuan-Yunnan region and its adjacent areas.We employed an envelope inversion technique for separating the intrinsic and scattering attenuations of the S coda wave,and obtained the intrinsic and scattering attenuation structures for frequencies between 0.25 and 8.00 Hz.The attenuation structures correlate well with the geological units,and some major faults mark the attenuation variations where historic large earthquakes have occurred.The regional average attenuation shows a negative frequency dependence.The average scattering attenuation has a faster descending rate than the average intrinsic attenuation,and is dominant at low frequencies,while at high frequencies the average intrinsic attenuation is stronger.The lateral variation in the intrinsic attenuation is consistent with the variation in heat flow,the scattering attenuation may be related to the scatter distribution and size.The total attenuation is consistent with the previous studies in this region,and the separate intrinsic and scattering attenuation may be useful in understanding regional tectonics and important in earthquake prevention and disaster reduction.

Crustal Motion Characteristics in the Eastern Margin of the Tibetan Plateau and Adjacent Regions after the Wenchuan Earthquake

The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.

Late Carboniferous-Early Permian Volcanic Event Deposits and Stratigraphic Correlation in Shandong Province and Its Adjacent Regions

Deposits of 10 volcanic events of 6 stages have been discovered by the authors after detailed field and lab studies of the Benxi and Taiyuan Formations in Shandong Province and its adjacent regions. They show certain temporal-spatial distribution characteristics. Volcanic fragments were probably derived from two different volcanic sources north and south of the North China Platform, while the magma of the two volcanic sources was probably derived from the lower crust. A new stratigraphic correlation scheme is put forward for the Benxi and Taiyuan Formations in this region on the basis of previous biostratigraphic work with the regionally widespread volcanic event layers as the marker bed for the isochronous stratigraphic correlation on a super-regional scale and in conjunction with the maximum transgressive event layers.

Lg coda Q_0 value and its relation with the tectonics in Chinese mainland and adjacent regions

We have collected 432 vertical component records from 45 stations of new CENC （China Earthquake Network Center） in Chinese mainland and adjacent regions. These records were used to calculate Q0 （Q at 1Hz） and η values of Lg coda from each station by the stack spectral ratio （SSR） method. Then the tomography method was applied to obtaining lateral variation of Q0 and η values in Chinese mainland and adjacent regions. The result indicates that Q0 value varies between 150 and 600 in the studied areas. Yunnan, southwest Sichuan, and northwest Myanmar show the lowest Q0 value （Q0〈240） and the crust of these regions is characterized by complicated crack and strong hydrothermal activity. The highest Q0 value （Qo〉510） exists in the border of southern Mongolia, Alxa and Ordos block. The η value varies between 0.45 and 0.75 in Chinese mainland and its adjacent regions.

Map of Mafic Dyke Swarms and Related Units of Russia and Adjacent Regions

Work is currently underway to produce a map in Arc GISTM 10 of the mafic dyke swarms and related units(volcanics,sills and layered intrusions)of Russia and adjacent regions at a scale of 1:5,000,000.Over the past

Discussion on origin of Pn velocity variationin China and adjacent region

Pn velocity lateral variation and anisotropy images were reconstructed by adding about 50 000 travel times from the regional seismic networks to the datum set of near 40 000 travel times from National Seismic Network of China used by WANG, et al. We discussed the relation of Pn velocity variation to Moho depth, Earths heat flow, distribution of Cenozoic volcanic rock and the result of rock experiment under high pressure and high temperature. The result of quantitative analysis indicates that Pn velocity is positively correlated with the crust thickness and negatively correlated with the Earths heat flow. Two linear regression equations, one between Pn velocity and crust thickness, and the other between Pn velocity and heat flow, were obtained. The rate of variation of Pn veloc-ity vP with pressure P, Pv/p, estimated from the velocity variation with crust thickness Hv/p, is close to the result obtained from the rock experiment under high pressure and high temperature. If the effect of crust thick-ness on Pn velocity is deducted from the velocity variation, then the low Pn velocity beneath Qinghai-Xizang pla-teau is more notable. The low Pn velocity regions well agree with the Cenozoic volcanic rock. In the several re-gions with significant anisotropy, the direction of fast Pn velocity is consistent with the orientation of maximum principal crustal compressive stress, and also with the direction of present-day crustal movement. It indicates that the fast Pn velocity direction may be related to the deformation or flow of top mantle material along the direction of maximum pressure.

Discussion on origin of Pn velocity variation in China and adjacent region

Pn velocity lateral variation and anisotropy images were reconstructed by adding about 50 000 travel times from the regional seismic networks to the datum set of near 40 000 travel times from National Seismic Network of China used by WANG, et al. We discussed the relation of Pn velocity variation to Moho depth, Earths heat flow, distribution of Cenozoic volcanic rock and the result of rock experiment under high pressure and high temperature. The result of quantitative analysis indicates that Pn velocity is positively correlated with the crust thickness and negatively correlated with the Earths heat flow. Two linear regression equations, one between Pn velocity and crust thickness, and the other between Pn velocity and heat flow, were obtained. The rate of variation of Pn veloc-ity vP with pressure P, Pv/p, estimated from the velocity variation with crust thickness Hv/p, is close to the result obtained from the rock experiment under high pressure and high temperature. If the effect of crust thick-ness on Pn velocity is deducted from the velocity variation, then the low Pn velocity beneath Qinghai-Xizang pla-teau is more notable. The low Pn velocity regions well agree with the Cenozoic volcanic rock. In the several re-gions with significant anisotropy, the direction of fast Pn velocity is consistent with the orientation of maximum principal crustal compressive stress, and also with the direction of present-day crustal movement. It indicates that the fast Pn velocity direction may be related to the deformation or flow of top mantle material along the direction of maximum pressure.

Horizontal movement and strain characteristics in Tianshan and its adjacent region with GPS deformation data

Based on the multiple-term horizontal velocity solutions of 230 GPS monitoring sites in Tianshan and its adjacent region, the GPS site velocity fields and crustal horizontal strain fields in the area have been obtained. The results show that the crustal shortening rate of Tianshan, with the longitude （77°±1°）E as the boundary, gradually decreased towards two sides, from the south to the north, indicating that the pushing force of plate becomes weaker along with the fold deformation decreasing of the Tianshan. The direction of principal compressive strain of Tianshan and its adjacent area, nearly NNW, is basically perpendicular to the Tianshan cordillera trend, suggesting the distribution and variation of maximum principal compressive stress in Tianshan and its adjacent region resulted from collision and extrusion of Indian Plate. This paper indicates that the maximum shear strain field mainly con- centrates on two areas, one is Isyk lake of North Tianshan, Kyrgyzstan, and the other is the juncture of Jiashi （South Tianshan） and Pamir arc faults. In the above areas, it can be shown from the epicentral distribution that the strong earthquakes mostly occurs at the high shearing strain accumulation filed or its edge.

Upper mantle convection beneath northwest China and its adjacent region driven by density anomaly

We assume that the density anomalies, which are transformed from seismic tomography data, are corresponding to temperature distribution in a convective mantle. We take density anomalies as the driving force for mantle convection and solve the basic equation with given boundary conditions in a wave-number domain by using the FFT arithmetic. Using the physical model of upper mantle convection and the seismic tomography data supplied by XU et al, we calculated upper mantle convection beneath northwestern China and adjacent region. The flow patterns in the upper mantle show that there are upward and divergent flows in the basin regions, such as Tarim, Qaidam, Junggar and Kazakhstan, where the lithosphere is thin. There are downward and convergent flows in the mountain regions, such as Tianshan, Kunlun and Qilian, where the lithosphere is thick. In addition, because of the divergent flow under the Tarim Basin the upper mantle material in this region is driven southward to the north part of Tibetan Plateau and northward to Tianshan Mountain. Maybe, it is one of the reasons for the recent uplift of the Tianshaa Mountain.

Study on Ground Motion Attenuation Relation in Shanghai and Its Adjacent Region

Based on intensity data in Shanghai and its adjacent region, the intensity attenuation relation is determined. Selecting the western United States as a reference area where there are rich strong ground motion records and intensity data, and by determining ground motion attenuation relation in an area lacking in strong ground motion data, we obtain the ground motion attenuation relation in Shanghai and its adjacent region.

Determination of the degree 120 time-variable gravity field in the Sichuan-Yunnan region using Slepian functions and terrestrial measurements

The terrestrial time-variable gravity measurements are characterized by a high signal-to-noise ratio and sensitivity to the sources of mass change in the Earth's crust.These gravity data have many applications,such as surface deformation,groundwater storage changes,and mass migration before and after earthquakes.Based on repeated terrestrial gravity measurements at 198 gravity stations in the Sichuan-Yunnan region(SYR)from 2015 to 2017,we determine a time series of degree 120 gravity fields using the localized spherical harmonic(Slepian)basis functions.Our results show that adopting the first 6 Slepian basis functions is sufficient for effective localized Slepian modeling in the SYR.The differences between two gravity campaigns at the same time of year show an obvious correlation with tectonic features.The degree 120 timevariable gravity models presented in this paper will benefit the study of the regional mass migration inside the crust of the SYR and supplement the existing geophysical models for the China Seismic Experimental Site.

Strong Earthquake Activity and Its Relation to Regional Neotectonic Movement in Sichuan-Yunnan Region

Based on analyzing space inhomogeneous image of strong earthquake activity, the image of source rupture and the mechanical property of the source fault in Sichuan-Yunnan region, the relations among the strong earthquake activity, active fault, modern movement status of active blocks and structural background of the deep media have been discussed, and the characteristics of strong earthquake activity and possible mechanism have been also discussed.

Influence of 2008 Wenchuan earthquake on earthquake occurrence trend of active faults in Sichuan-Yunnan region

The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.

Wavelet analysis and interpretation of gravity data in Sichuan-Yunnan region, China

The Bouguer gravity anomaly data of Sichuan-Yunnan region and its vicinity were analyzed with wavelet trans- formation method. In the process, complete orthogonal wavelet function system with good symmetry and higher vanishing moment was selected to decompose the gravity anomaly into two parts. With the power spectral analysis on the decomposed anomalies, we interpreted that the two parts of anomalies represent the density variation in upper and middle crust, and in deep crust and uppermost mantle, respectively. The two parts of anomalies indicate the difference between shallow and deep tectonics. The results of shallow-layer apparent density mapping reveal that: a) the crustal density in Sichuan basin is higher than that in Songpan-Garze orogenic zone; b) the density of Kangdian rhombic block is heterogeneous; c) the boundary faults of Kangdian block are of different density fea- tures, suggesting different tectonic signification. The results of deep-layer apparent density mapping show a similar, but not the same, density distribution pattern as the shallow results, and indicate that the tectonics of shallow and deep crust are different, they may be in a status of incomplete coupling. Our results also show that the earthquakes in this area are controlled not only by the fracture zones but also by the deep density distribution.

SLC Analysis on Earthquake Activity in the Regions of Sichuan and Yunnan of China

Using the method of Single-link Cluster(SLC),analyzing the pattern of time sliding of SLCparameters,the earthquake activity in the western Sichuan-Yunnan of China is studiedcombining with the regional earthquake catalogue since 1970 and the tectonic background.Comparing with the high level of earthquake activity in 1970’s and the low in 1980’s,theearthquake activity is in general at the middle level in 1990’s.This paper suggests that SLCmethod,which considers the temporal and spatial relationship among earthquake events,could be adopted to analyze the trend of regional earthquake activity,it is very useful forstudying seismic activity.

Numerical simulation of the influence of lower-crustal flow on the deformation of the Sichuan-Yunnan Region

On the basis of distribution of active fault and regional rheological structure, a three-dimensional finite element model of Sichuan-Yunnan region, China, is constructed to simulate contemporary crustal motion and stress distribution and discuss the dynamic mechanism of crustal motion and deformation in the Sichuan-Yunnan region. Linear Maxwell visco-elastic model is applied, which includes the active fault zones, the elastic upper crust and viscous lower crust and upper mantle. Four different models with different boundary conditions and deep structure are calculated. Some conclusions are drawn through comparison. Firstly, the crustal rotation about the eastern syntaxis of the Himalaya in the Sicuan-Yunnan region may be controlled by the special dynamic boundary condition. The drag force of the lower-crust on the upper crust is not negligible. At the same time, the main active fault zones play an important role in the contemporary crustal motion and deformation in Sichuan-Yunnan region.

Determinations of directions of the mean stress field in Sichuan-Yunnan region from a number of focal mechanism solutions

Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.

Study on Postseismic Impact of Wenchuan Earthquake on the Sichuan-Yunnan Region Based on Three-Dimensional Viscoelastic Finite Element Method

Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_S8.0 earthquake,we built a three-dimensional viscoelastic finite element model of the crust in the Sichuan-Yunnan region.The postseismic impact of the Wenchuan M_S8.0 earthquake on the Sichuan-Yunnan region was studied.The results show that:①The far-field horizontal deformation caused by the viscoelastic relaxation of the medium in the 10 years after the earthquake is about 0-20 mm within the Sichuan-Yunnan diamond-shaped block,which has a greater influence on north side and smaller on south side.②In the 10 years after the earthquake,the far-field vertical deformation caused by the viscoelastic relaxation effect of the medium is small,and it shows an increase of about 0-4 mm in most areas of the Sichuan-Yunnan diamond-shaped block.③The Xianshuihe fault and the eastern segment of the East Kunlun fault,which are close to the seismogenic fault,show a high gradient on deformation fields after the earthquake.④In order to compare with the strong earthquake activity in the SichuanYunnan region after the Wenchuan earthquake,the horizontal stress state and the Coulomb failure stress change of the active block boundary are also calculated.From the spatial distribution of the coseismic and postseismic displacement field,the fault activity characteristics reflected by the stress state and the stress loading of the fault layer reflected by the Coulomb failure stress change,there is a certain correlation with the spatial distribution of strong earthquake activity in this region.

Characteristics of isostatic gravity anomaly in Sichuan-Yunnan region,China

Sichuan-Yunnan region in China, a tectonic transition belt where earthquakes occurred frequently and intensely, has a distinct variation characteristic of gradient zone of Bouguer gravity anomaly （BGA）. Many deep faults and epicenters of severe earthquake scatter along the BGA gradient zones. Here we apply two forward models （Airy model and Vening Meinesz model） of isostatic gravity mechanisms （local versus regional） in this region to calculated the isostatic gravity anomaly （IGA）. Afterwards, the relationship between IGA and distribution of faults as well as seismicity is also illustrated. The IGA results show that the two models are similar and most parts of the study area are in an isostatic state. Most featured faults are distributed along the steep anomaly gradient zones; earthquakes tend to occur in the non-isostatic area and steep gradient belt of IGA. The distribution of root thickness based on regional mechanism can be associated with the main trend of BGA variation. The regional mechanism is more plausible and closer to the reality because of its relatively further consideration of the horizontal forces derived from adjacent particles in the crust. Then we analyze the effect of isostasy on the tectonic movements and find that the isostatic adjustment is not the main cause of the continuous uplift process of Longmenshan Mountain fault zone. which is due to the Indian-Eurasian continental collision.