Microstructure and Mechanical Properties of Poly (Vinyl Chloride) Modified by Silica Fume /Acrylic Core-Shell Impact Modifier Blends

This research explored replacing acrylic core-shell impact modifier （AIM） by silica fume to toughen PVC. 100%, 75%, 50% and 25% of AIM （8 phr） were substituted by silica fume in PVC respectively, and then processed by dry blending and twin-screw extrusion. Severe silica fume agglomeration was observed by scanning electron microscope （SEM） in the PVC matrix when 8 phr pure silica fume was used and processed by screw speed of 20 rpm. Its tensile strength was thereby reduced by 38% comparing to unmodified PVC. The silica fume was successfully dispersed while the screw speed was slowed down to 10 rpm to give a stronger screw torque and a longer melt residential time in the extruder. The tensile strength was ’recovered’ to a level comparable to unmodified PVC. Impact test were performed on all formulations extruded at 10 rpm screw speed and synergetic toughening effect was found with 50% substitution and it had the impact strength that was comparable to 8 phr pure AIM toughened PVC.

Application of Modified Silica Coated Magnetite Nanoparticles for Removal of Iodine from Water Samples

The adsorption of iodine onto silica coated magnetite nanoparticles(im-SCMNPs) that modified with imidazole was investigated for removal of high concentrations of iodine from wastewater. Modified silica magnetite nanoparticles showed high efficiency in removing iodine from wastewater samples. The optimum pH for iodine removal was 7.0-8.0. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. The size of the produced magnetite nanoparticles was determined by X-ray diffraction analysis and scanning electron microscopy. Synthesized magnetite nanoparticles showed the high adsorption capacity and would be a good method to increase adsorption efficiency for the removal of iodine in a wastewater treatment process. The Langmuir adsorption capacity(qmax) was found to be 140.84 mg/g of the adsorbent.

Highly Efficient Heavy-Metal-Ion Removal from Shellfish Processing Liquid with Low Protein and Polysaccharide Loss by Hybrid Mesoporous Silica Diol-APDC-SBA15

Heavy metal ions in shellfish products are harmful to human health,and their removal with low nutrient loss remains challenging.Herein,a new type of mesoporous silica(SBA15),modified internally with ammonium pyrrolidine dithiocarbamate(APDC)and externally with alkyl-diol groups,which was named as Diol-APDC-SBA15,was successfully developed and characterized by powder X-ray diffraction patterns,nitrogen adsorption,and Fourier transform infrared spectroscopy.The solutions with lead,chromium,cadmium,and copper were used to investigate the adsorption capacity of Diol-APDC-SBA15.Diol-APDC-SBA15 was adopted to remove heavy metals from cooking liquids of clams(Ruditapes philippinarum),hydrolysate liquids of oysters(Ostrea gigas Thunberg),and polysaccharide solution from the cooking liquid of R.philippinarum.The efficiencies of removing heavy metal ions and the loss rates of proteins and polysaccharides were examined.The results showed that the adsorption capacities of Diol-APDCSBA15 for Pb,Cr,Cd,and Cu in standard heavy-metal solutions were 161.4,166.1,29.6,and 60.2mgg^(−1),respectively.The removal efficiency of Diol-APDC-SBA15 for Pb in the three shellfish processing liquids ranged from 60.5%to 99.6%.The Cr removal efficiency was above 99.9%in the oyster hydrolysate liquid.Meanwhile,the percentages of polysaccharide loss were 5.5%and 3.7%in the cooking liquid of clam and polysaccharide solution,respectively,and the protein loss was 1.2%in the oyster hydrolysate liquid.Therefore,the Diol-APDC-SBA15 material exhibits a great potential application in the removal of heavy metals from shellfish processing liquids with low losses of proteins and polysaccharides.

STUDY ON ENRICHMENT AND SEPARATION OF TRACE ELEMENTS WITH SILICA GELS MODIFIED BY HETEROCYCLIC AZO DYES

Two types of modified silica gels were prepared by adsorption method and bonding method respectively. Enrichment and separation of trace metal ions have been done by using the column packed with modified silica gels.

Evaluation of Average Wall Thickness of Organically Modified Mesoporous Silica

The small angle X-ray scattering of organically modified MSU-X silica prepared by co-condensation of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) show negative deviation from Debye’s theory due to the existence of the organic interface layer. By exerting correction of the scattering negative deviation, Debye relation may be recovered, and the average wall thickness of the material may be evaluated.

Electrochemical Behavior of Magnolol on FeWO4 Nanoflower Modified Carbon Paste Electrode

In order to establish a simple,sensitive,and fast reliable detection method to determine the magnolol,FeWO4 nanoflower was synthesised through a solvothermal technique and FeWO4 nanoflower modified carbon paste electrode（CPE） was developed.The voltammetric behavior of magnolol on the modified electrodes was studied using cyclic voltammetry（CV）,linear sweep voltammetry（LSV）,and differential pulse voltammetry（DPV）.The experimental results showed that the modified electrode remarkably enhanced the electrochemical response of the magnolol and exhibited a wide linear range for determination of the magnolol from 1.0×10-7 to 1.0×10-4 mol/L with a low detection limit of 5.0×10-8 mol/L.

Fluorescent AIE dots encapsulated organically modified silica (ORMOSIL) nanoparticles for two-photon cellular imaging

2,3-Bis(4-(phenyl(4-(1,2,2-triphenylvinyl)phenyl)amino)phenyl) fumaronitrile (TPE-TPA-FN or TTF), which possesses aggregation-induced emission (AIE) characteristic, is doped in organically modified silica (ORMOSIL) nanoparticles. By increasing the weight ratio of TTF to the precursor of silica nanoparticles (the quantities of the precursors were kept the same), the fluorescence intensity of nanoparticles increased correspondingly, due to the formation of larger AIE dots in the cores of ORMOSIL nanoparticles. The fluorescent and biocompatible nanoprobes were then utilized for in vitro imaging of HeLa cells. Two-photon fluorescence microscopy clearly illustrated that the nanoparticles have the capacity of nucleus permeability, as well as cytoplasm staining towards tumor cells. Our experimental results may offer a promising method for fast and bright fluorescence imaging, as well as bio-molecule/drug delivery to cell nucleus.