Effect of salvianolic acid B-loaded mesoporous silica nanoparticles on myocardial ischemia-reperfusion injury

Background:Currently,no drugs can specifically improve clinical cardiac ischemia-reperfusion injury or the prognosis of hemodialysis.Salvianolic acid B(SalB)is a widely used cardiac protectant;however,its clinical application is limited by its low oral bioavailability and poor intestinal absorption.The exploration of its preparation and clinical applications has become a research hotspot in recent years.Methods:To determine whether mesoporous silica nanoparticles(MSNs)efficiently delivered SalB to the heart and SalB@MSNs-RhB reduced myocardial ischemia-reperfusion injury,we constructed a myocardial ischemia-reperfusion male rat model,hypoxia/reoxygenation cardiomyocytes,and treated them with SalB@MSNs-RhB.Results:SalB@MSNs-RhB showed improved bioavailability,therapeutic effect,heightened JAK2/STAT3-dependent pro-survival signaling,and antioxidant responses,thereby protecting cardiomyocytes from ischemia-reperfusion injury-induced oxidative stress and apoptosis.Conclusion:This use of SalB-loaded nanoparticles and investigation of their mechanism of action may provide a new strategy for treating cardiomyocytes.Thus,hypoxia/reoxygenation promotes the clinical application of SalB.

Effects of silica nanoparticles on growth and photosynthetic pigment contents of Scenedesmus obliquus

To assess the aquatic ecosystem safety for silica （SiO2） nanoparticles （NPs）, the growth inhibition and photosynthetic pigment contents of Scenedesmus obliquus in logarithm growth phase exposed to SiO2 NPs and SiO2 bulk particles （BPs） suspensions were measured. SiO2 NPs with 10-20 nm diameters were found to be toxic. The 20% effective concentration （EC20） values for 72 and 96 hr were 388.1 and 216.5 mg/L, respectively. The contents of chlorophyll decreased significantly under moderate and high concentration （50, 100, and 200 mg/L） of SiO2 NPs after 96-hr exposure, but the carotenoids did not. SiO2 BPs were found to be nontoxic up to 200 mg/L. The toxicity of SiO2 NPs probablely due to their sorption to algal cells surface. The results imply that there is potential harm to aquatic environment by using SiO2 NPs, and it should deserve special concern.

Effect of silica nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) coated layers on the performance of polypropylene separator for lithium-ion batteries

In an effort to reduce thermal shrinkage and improve electrochemical performance of porous polypropylene （PP） separators for lithium-ion batteries, a new composite separator is developed by introducing ceramic coated layers on both sides of PP separator through a dip-coating process. The coated layers are comprised of heat-resistant and hydrophilic silica nanoparticles and polyvinylidene fluoride-hexafluoropropylene （PVDF-HFP） binders. Highly porous honeycomb structure is formed and the thickness of the layer is only about 700 nm. In comparison to the pristine PP separator, the composite separator shows significant reduction in thermal shrinkage and improvement in liquid electrolyte uptake and ionic conduction, which play an important role in improving cell performance such as discharge capacity, C-rate capability, cycle performance and coulombic efficiency.

pH-responsive mesoporous silica nanoparticles employed in controlled drug delivery systems for cancer treatment

In the fight against cancer, controlled drug delivery systems have emerged to enhance the therapeutic efficacy and safety of anti-cancer drugs. Among these systems, mesoporous silica nanoparticles （MSNs） with a functional surface possess obvious advantages and were thus rapidly developed for cancer treatment. Many stimuli-responsive materials, such as nanopartides, polymers, and inorganic materials, have been applied as caps and gatekeepers to control drug release from MSNs. This review presents an overview of the recent progress in the production of pH-responsive MSNs based on the pH gradient between normal tissues and the tumor microenvironment. Four main categories of gatekeepers can respond to acidic conditions. These categories will be described in detail.

Subchronic Oral Toxicity of Silica Nanoparticles and Silica Microparticles in Rats

Objective To investigate the subchronic oral toxicity of silica nanoparticles（NPs） and silica microparticles（MPs） in rats and to compare the difference in toxicity between two particle sizes.Methods Sprague-Dawley rats were randomly divided into seven groups： the control group; the silica NPs low-, middle-, and high-dose groups; and the silica MPs low-, middle-, and high-dose groups [166.7,500, and 1,500 mg/（kg·bw·day）]. All rats were gavaged daily for 90 days, and deionized water was administered to the control group. Clinical observations were made daily, and body weights and food consumption were determined weekly. Blood samples were collected on day 91 for measurement of hematology and clinical biochemistry. Animals were euthanized for necropsy, and selected organs were weighed and fixed for histological examination. The tissue distribution of silicon in the blood, liver,kidneys, and testis were determined.Results There were no toxicologically significant changes in mortality, clinical signs, body weight,food consumption, necropsy findings, and organ weights. Differences between the silica groups and the control group in some hematological and clinical biochemical values and histopathological findings were not considered treatment related. The tissue distribution of silicon was comparable across all groups.Conclusion Our study demonstrated that neither silica NPs nor silica MPs induced toxicological effects after subchronic oral exposure in rats.

Determination of Sulfadimidine in Royal Jelly by C_(18)-functionalized Magnetic Silica Nanoparticles Solid Phase Extraction-High Performance Liquid Chromatography-Tandem Mass Spectrometry

[Objective] This study aimed to develop a method of C_18-functionalized magnetic silica nanoparticles solid phase extraction-high performance liquid chro- matography-tandem mass spectrometry for the determination of sulfadimidine in royal jelly. [Method] The royal jelly samples were pretreated by MCX SPE column and C_18-functionalized magnetic silica nanoparticles, and the purified samples were de- tected by HPLC-MS/MS. [Result] The detection method showed a good linear rela- tionship in the range of 5-80 ugkg （r=0.993 1）. The recovery ranges were between 93%- 104% with the relative standard deviations （RSD） below 11.3%. [Conclusion] Combined with automation equipment, the method is simple, fast, time-saving, and easy to real- ize the automation of sulfadimidine in the royal jelly samples before determination.

Evaluating the potential of surface-modified silica nanoparticles using internal olefin sulfonate for enhanced oil recovery

Recently,nanoparticles have proven to enhance oil recovery on the core-flood scale in challenging high-pressure high-temperature reservoirs.Nanomaterials generally appear to improve oil production through wettability alteration and reduction in interfacial tension between oil and water phases.Besides,they are environmentally friendly and cost-effective enhanced oil recovery techniques.Studying the rheological properties of nanoparticles is critical for field applications.The instability of nanoparticle dispersion due to aggregation is considered as an unfavorable phenomenon in nanofluid flooding while conducting an EOR process.In this study,wettability behavior and rheological properties of surface-treated silica nanoparticles using internal olefins sulfonates(IOS20–24 and IOS19–23),anionic surfactants were investigated.Surface modification effect on the stability of the colloidal solution in porous media and oil recovery was inspected.The rheology of pure and surfacetreated silica nanoparticles was investigated using a HPHT rheometer.Morphology and particle size distributions of pure and coated silica nanoparticles were studied using a field emission scanning electron microscope.A series of core-flood runs was conducted to evaluate the oil recovery factor.The coated silica nanoparticles were found to alter rheological properties and exhibited a shear-thinning behavior as the stability of the coated silica nanoparticles could be improved considerably.At low shear rates,the viscosity slightly increases,and the opposite happens at higher shear rates.Furthermore,the surfacemodified silica nanoparticles were found to alter the wettability of the aqueous phase into strongly water-wet by changing the contact angle from 80°to 3°measured against glass slides representing sandstone rocks.Oil–water IFT results showed that the surface treatment by surfactant lowered the oil–water IFT by 30%.Also,the viscosity of brine increased from 0.001 to 0.008 Pa s by introducing SiO2 nanoparticles to the aqueous phase for better displacement efficiency during chemicalassisted EOR.The core-flood experiments revealed that the ultimate oil recovery is increased by approximately 13%with a surfactant-coated silica nanofluid flood after the conventional waterflooding that proves the potential of smart nanofluids for enhancing oil recovery.The experimental results imply that the use of surfactant-coated nanoparticles in tertiary oil recovery could facilitate the displacement efficiency,alter the wettability toward more water-wet and avoid viscous fingering for stable flood front and additional oil recovery.

Characterization of modified mesoporous silica nanoparticles as vectors for siRNA delivery

Gene therapy using siRNA molecules is nowadays considered as a promising approach. For successful therapy, development of a stable and reliable vector for siRNA is crucial. Non-viral and non-organic vectors like mesoporous silica nanoparticles(MSN) are associated with lack of most viral vector drawbacks, such as toxicity, immunogenicity, but also generally a low nucleic acid carrying capacity. To overcome this hurdle, we here modified the pore walls of MSNs with surface-hyperbranching polymerized poly(ethyleneimine)(hbPEI), which provides an abundance of amino-groups for loading of a larger amount of siRNA molecules via electrostatic adsorption. After loading, the particles were covered with a second layer of pre-polymerized PEI to provide better protection of siRNA inside the pores, more effective cellular uptake and endosomal escape. To test the transfection efficiency of PEI covered si RNA/MSNs, MDA-MB 231 breast cancer cells stably expressing GFP were used. We demonstrate that PEI-coated si RNA/MSN complexes provide more effective delivery of si RNAs compared to unmodified MSNs. Thus, it can be concluded that appropriately surface-modified MSNs can be considered as prospective vectors for therapeutic siRNA delivery.

Incorporation of Sphingosine 1-Phosphate Loaded Mesoporous Silica Nanoparticles into Poly ( L-lactic acid ) Nanofibrous Scaffolds for Bone Tissue Engineering

Controlled release of the functional factors is the key to improve clinical therapeutic efficacy during the tissue repair and regeneration. The thrce-dimensional （3D） scaffold can provide not only physical properties such as high strength and porosity hut also an optimal environment to enhance tissue regeneration. Sphingosine 1-phosphate （SIP）, an angiogenlc factor, was loaded into mesoporous silica nanoparticles （MSNs） and then incorporated into poly （ L-lactic add ） （ PLLA ） nanofibrons scaffold, which was fabricated by thermally induced phase separation （TIPS） method. The prepared scaffolds were examined by attenuated total reflection Fourier transform infrared spectroscopy （ATR-FTIR）, scanning electron microscopy （ SEM）, and transmission electron microscopy （TEM） and compressive mechanical test. The ATR-FTIR result demonstrated the existence of MSNs in the PLLA nanofibrous scaffold. The SEM images showed that PLLA scaffold had regular pore channel, interconnected pores and nanofibrous structure. The addition of MSNs at appropriate content had no visible effect on the structure of scaffold. The compressive modulus of scaffold containing MSNs was higher than that of the scaffold without MSNs. Furthermore, fluorescein isothiocyanate （FTTC） was used as model molecule to investigate the release behavior of SIP from MSNs- incorporated PLLA （MSNs/PLLA） nanofibrons scaffold. The result showed that the composite scaffold largely reduced the initial burst release and exhibited prolonged release of FITC than MSNs. Thus, these results indicated that SIP-loaded composite uanofibrons scaffold has potential applications for bone tissue engneering.

Immobilization of laccase from Myceliophthora thermophila on functionalized silica nanoparticles: Optimization and application in lindane degradation

This work is focused on immobilization of laccase from Myceliophthora thermophila expressed in Aspergillus oryzae(Novozym 51003?laccase)on amino modified fumed nano-silica(AFNS)and the possible use in bioremediation.Hereby,for the first time,factors affecting the immobilization of Novozym 51003?laccase on AFNS were investigated for defining the immobilization mechanism and optimizing the utilization of AFNS as support for laccase immobilization.The highest specific activity(13.1 IU·mg-1 proteins)was achieved at offered 160 mg per g of AFNS and for the same offered protein concentration the highest activity immobilization yield,reaching68.3%after the equilibrium time,at optimum pH 5.0,was obtained.Laccase immobilization occurs by adsorption as monolayer enzyme binding in 40 min,following pseudo-first-order kinetics.The possible use of obtained immobilized preparation was investigated in degradation of pesticide lindane.Within 24 h,lindane concentration was reduced to 56.8%of initial concentration and after seven repeated reuses it retained 70%of the original activity.

Light and temperature dual responsive pesticide release system based on mesoporous silica nanoparticles modified by dopamine

A light and temperature dual responsive copolymer,poly(7-(4-vinylbenzy-loxyl)-4-methylcoumarin-co-N vinyl caprolactam-co-tri(ethylene glycol)methyl ether methacrylate)(PVNM),was grafted on the surface of dopamine based mesoporous silica nanoparticles(MSNs).The resulting polymer brush,MSNs-g-PVNM,was characterized by FT-IR,TEM,TGA and XPS.The dual responsive behaviors of MSNs-g-PVNM were systematically studied.With imidacloprid as the model guest pesticide,the loading percentage and loading efficiency of the polymer brush were determined as 9.2%and 40.6%,respectively.The release efficiency of imidacloprid in MSNs-g-PVNM was the lowest value of 5.4%at 20℃ and 365 nm,and it reached the highest value of 52.4%at 50℃ and 254 nm.The loss percentage of imidacloprid on the leaves contained imidacloprid-loaded MSNs-g-PVNM(8.4%)was much less than that contained only imidacloprid(25.2%)after three rinses.It was confirmed that the release process of imidacloprid was well regulated through changing external conditions such as light and temperature.

The role of surface functionalization of silica nanoparticles for bioimaging

Among the several types of inorganic nanoparticles available,silica nanoparticles(SNP)have earned their relevance in biological applications namely,as bioimaging agents.In fact,uorescent SNP(FSNP)have been explored in this-eld as protective nanocarriers,overcoming some limitations presented by conventional organic dyes such as high photobleaching rates.A crucial aspect on the use of uorescent SNP relates to their surface properties,since it determines the extent of interaction between nanoparticles and biological systems,namely in terms of colloidal stability in water,cellular recognition and internalization,tracking,biodistribution and speci-city,among others.Therefore,it is imperative to understand the mechanisms underlying the interaction between biosystems and the SNP surfaces,making surface functionalization a relevant step in order to take full advantage of particle properties.The versatility of the surface chemistry on silica platforms,together with the intrinsic hydrophilicity and biocompatibility,make these systems suitable for bioimaging applications,such as those mentioned in this review.

Dual responsive block copolymer coated hollow mesoporous silica nanoparticles for glucose-mediated transcutaneous drug delivery

A self-regulated anti-diabetic drug release device mimicking pancreatic cells is highly desirable for the therapy of diabetes. Herein, a glucose-mediated dual-responsive drug delivery system, which combines pH-and H_(2)O_(2)-responsive block copolymer grafted hollow mesoporous silica nanoparticles(HMSNs)with microneedle(MN) array patch, has been developed to achieve self-regulated administration.The poly[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate]-b-poly[2-(dimethylamino)ethyl methacrylate](PPBEM-b-PDM) polymer serves as gate keeper to prevent drug release from the cavity of HMSNs at normoglycemic level. In contrast, the drug release rate is significantly enhanced upon H_(2)O_(2)and pH stimuli due to the chemical change of H_(2)O_(2)sensitive PPBEM block and acid responsive PDM block. Therefore, incorporation of anti-diabetic drug and glucose oxidase(GOx, which can oxidize glucose to gluconic acid and in-situ produce H_(2)O_(2)) into stimulus polymer coated HMSNs results in a glucose-mediated MN device after depositing the drug-loaded nanoparticles into MN array patch. Both in vitro and in vivo results show this MN device presents a glucose mediated self-regulated drug release characteristic, which possesses a rapid drug release at hyperglycemic level but retarded drug release at normoglycemic level. The result indicates that the fabricated smart drug delivery system is a good candidate for the therapy of diabetes.

Delivery of nitric oxide-releasing silica nanoparticles for in vivo revascularization and functional recovery after acute peripheral nerve crush injury

Nitric oxide(NO)has been shown to promote revascularization and nerve regeneration after peripheral nerve injury.However,in vivo application of NO remains challenging due to the lack of stable carrier materials capable of storing large amounts of NO molecules and releasing them on a clinically meaningful time scale.Recently,a silica nanoparticle system capable of reversible NO storage and release at a controlled and sustained rate was introduced.In this study,NO-releasing silica nanoparticles(NO-SNs)were delivered to the peripheral nerves in rats after acute crush injury,mixed with natural hydrogel,to ensure the effective application of NO to the lesion.Microangiography using a polymer dye and immunohistochemical staining for the detection of CD34(a marker for revascularization)results showed that NO-releasing silica nanoparticles increased revascularization at the crush site of the sciatic nerve.The sciatic functional index revealed that there was a significant improvement in sciatic nerve function in NO-treated animals.Histological and anatomical analyses showed that the number of myelinated axons in the crushed sciatic nerve and wet muscle weight excised from NO-treated rats were increased.Moreover,muscle function recovery was improved in rats treated with NO-SNs.Taken together,our results suggest that NO delivered to the injured sciatic nerve triggers enhanced revascularization at the lesion in the early phase after crushing injury,thereby promoting axonal regeneration and improving functional recovery.

Mesoporous Silica Nanoparticles for the Analytical Extraction of Triphenyltin from Water

A rapid, precise, sensitive and simple method has been developed for the extraction and determination of TPT （triphenyltin）, DPT （diphenyltin） and MPT （monophenyltin） in seawater samples. The procedure is based on the use of the dual functionalization of mesoporous silica with diol and Cl6 alkane groups for the collection of TPT and its derivatives, DPT and MPT, from seawater samples, followed by ethylation of the target matrices using sodium tetraethylborate （NaBEt4） and quantification by gas chromatography with pulsed flame photometric detection. The modified extraction method replaces conventional solid- and liquid-phase extraction with solid dispersion of silica nanoparticles. The partitioning of the analyte between a carefully size-selected silica nanoparticles （solid phase） and a liquid phase occurs as the solid moves through the sample as a colloidal sol. By tailoring the size of the particles to approximately 250 nm in diameter, they can be easily dispersed in aqueous solution, without the need for any mechanical or hand shaking and the solid can then be readily recovered, together with the analytes, by simple filtration or centrifugation. Recoveries of TPT, DPT and MPT chloride spiked matrices rang from 87.3±1.1 to 98.1±1.3 in seawater samples （n = I 1 samples）. The limit of detection obtained was typically in the range of 0.1-3 ng Sn/L. The proposed method shows excellent linearity in the range of 0.5-2 ng Sn/L and good repeatability （RSD 〈 5% at 0.02 ng TPT （as Sn）/L）. The method performance is demonstrated with real seawater samples.

Poly(NIPAM-co-MPS)-grafted multimodal porous silica nanoparticles as reverse thermoresponsive drug delivery system

Hybrid drug delivery systems(DDS) have been prepared by grafting poly(NIPAM-co-MPS) chains on multimodal porous silica nanoparticles having an inner mesoporous structure and an outer thin layer of micropores. The hybrid thermoresponsive DDS were fully characterized and loaded with a model drug. The in vitro drug release tests are carried out at below and above the lower critical solution temperature(LCST) of the copolymer. The results have revealed that due to the presence of small diameter(~1.3 nm) micropores at the periphery of the particles, the collapsed globules of the thermoresponsive copolymer above its LCST hinders the complete release of the drug which resulted in a reverse thermoresponsive drug release profile by the hybrid DDS.

How much would silica nanoparticles enhance the performance of low-salinity water flooding?

Nanofluids and low-salinity water(LSW)flooding are two novel techniques for enhanced oil recovery.Despite some efforts on investigating benefits of each method,the pros and cons of their combined application need to be evaluated.This work sheds light on performance of LSW augmented with nanoparticles through examining wettability alteration and the amount of incremental oil recovery during the displacement process.To this end,nanofluids were prepared by dispersing silica nanoparticles(0.1 wt%,0.25 wt%,0.5 wt% and 0.75 wt%)in 2,10,20 and 100 times diluted samples of Persian Gulf seawater.Contact angle measurements revealed a crucial role of temperature,where no wettability alteration occurred up to 80 ℃.Also,an optimum wettability state(with contact angle 22°)was detected with a 20 times diluted sample of seawater augmented with 0.25 wt% silica nanoparticles.Also,extreme dilution(herein 100 times)will be of no significance.Throughout micromodel flooding,it was found that in an oil-wet condition,a combination of silica nanoparticles dispersed in 20 times diluted brine had the highest displacement efficiency compared to silica nanofluids prepared with deionized water.Finally,by comparing oil recoveries in both water-and oil-wet micromodels,it was concluded that nanoparticles could enhance applicability of LSW via strengthening wettability alteration toward a favorable state and improving the sweep efficiency.

Synthesis and Characterization of Carboxyl-terminated Polyethylene Glycol Functionalized Mesoporous Silica Nanoparticles

Colloidal mesoporous silica nanoparticles functionalized with carboxy-terminated polyethylene glycol(CMS-PEG-COOH) were successfully synthesized by covalently grafting dicarboxy-terminated polyethylene glycol(HOOC-PEG-COOH) on the surface of the amino functionalized CMS nanoparticles with amide bond as a cross linker. Moreover, the structural and particle properties of CMS-PEG-COOH were characterized by nuclear magnetic resonance spectroscopy(1 H-NMR), transmission electron microscopy(TEM), dynamic light scattering(DLS), nitrogen adsorption-desorption measurements, X-ray diffraction(XRD), and Fourier transform infrared spectroscopy(FT-IR). The nanomaterials presented a relatively uniform spherical shape morphology with diameters of about 120 nm,and favorable dispersibility in weak acid solution. The CMSPEG-COOH exhibited no changes in the state of amorphous, while the mesopores sizes of 5.25 nm might provide the nanomaterials with large capacity for the loading and releasing of drugs. So the results indicated that CMSPEG-COOH might be a critical nanomaterial for drug delivery system in the future.

Preparation of Ionic Liquid Functionalized Silica Nanoparticles for Oral Drug Delivery

The objective of this study is to utilize the pH sensitivity of modified silica nanoparticles (SNIL) by imidazole-based ionic liquid for oral delivery of insulin. In the first time, the imidazole was covalently attached to the 3-trimethoxysily-lpropyl chloride with replacement of all the chlorine atoms. Then, a silica nanoparticle was modified by N-(3-trimeth-oxysilylpropyl) imidazole. The nanocapsule (NCIL) was achieved after the etching of the modified silica nanoparticle template with hydrofluoric acid. The nanoparticles connected through an ionic liquid-like network were characterized by FTIR and SEM. Insulin was entrapped in these carriers and the in vitro release profiles were established separately in both enzyme-free simulated gastric and intestinal fluids (SGF, pH 1) and (SIF, pH 7.4), respectively. When these drug-loaded nanoparticles was placed in physiological buffer solution (pH 7.4), a partial negative surface charge on the modified silica nanoparticle was generated due to the deprotonation of silanol groups, and the strong electrostatic repulsion triggered a sustained release of the loaded molecules.

Preparation and Characterization of Carboxyl Functionalized Fluorescent Mesoporous Silica Nanoparticles Containing 8-Hydroxyquinolinate Zinc Complexes

Fluorescent mesoporous silica nanoparticles functionalized with carboxyl group(Znq-CMSCOOH) were successfully synthesized by in situ formation route of 8-hydroxyquinolinate zinc complexes in channels of mesoporous silica nanoparticles and post-grafting of carboxyl group on the surface. Moreover,the particle size and structural properties of Znq-CMS-COOH were characterized by transmission electron microscopy(TEM),field emission scanning electron microscopy(FE-SEM),dynamic light scattering(DLS),Fourier transform infrared spectroscopy(FT-IR),UV-vis spectrometer, fluorescence spectrometer and nitrogen adsorption-desorption measurements. The obtained results suggest that the Znq-CMS-COOH presents the uniform spherical shape with the mean diameter of about 85 nm and the obvious wormhole arrangement mesoporous. In addition, the Znq-CMS-COOH possesses green fluorescence with the emission peaks at 495 nm. So the Znq-CMS-COOH, which is beneficial to further modification and tracing, might be a great potential carrier for applying in drug delivery system in the future.