Effect of the Particle Packing Configuration on Fixed Bed Performance

Fixed-bed reactors are generally considered the optimal choice for numerous multi-phase catalytic reactions due to their excellent performance and stability.However,conventional fixed beds often encounter challenges related to inadequate mass transfer and a high pressure drop caused by the non-uniform void fraction distribution.To enhance the overall performance of fixed beds,the impact of different packing configurations on performance was investigated.Experimental and simulation methods were used to investigate the fluid flow and mass transfer performances of various packed beds under different flow rates.It was found that structured beds exhibited a significantly lower pressure drop per unit length than conventional packed beds.Furthermore,the packing configurations had a critical role in improving the overall performance of fixed beds.Specifically,structured packed beds,particularly the H-2 packing configuration,effectively reduced the pressure drop per unit length and improved the mass transfer efficiency.The H-2 packing configuration consisted of two parallel strips of particles in each layer,with strips arranged perpendicularly between adjacent layers,and the spacing between the strips varied from layer to layer.

Research progress in interface modification and thermal conduction behavior of diamond/metal composites

Diamond/metal composites are widely used in aerospace and electronic packaging fields due to their outstanding high thermal conductivity and low expansion.However,the difference in chemical properties leads to interface incompatibility between diamond and metal,which has a considerable impact on the performance of the composites.To improve the interface compatibility between diamond and metal,it is necessary to modify the interface of composites.This paper reviews the experimental research on interface modification and the application of computational simulation in diamond/metal composites.Combining computational simulation with experimental methods is a promising way to promote diamond/metal composite interface modification research.

Replacement of annular domain with trapezoidal domain in computational modeling of nonaqueous-phase-liquid dissolution-front propagation problems

In order to simulate the instability phenomenon of a nonaqueous phase liquid(NAPL) dissolution front in a computational model, the intrinsic characteristic length is commonly used to determine the length scale at which the instability of the NAPL dissolution front can be initiated. This will require a huge number of finite elements if a whole NAPL dissolution system is simulated in the computational model. Even though modern supercomputers might be used to tackle this kind of NAPL dissolution problem, it can become prohibitive for commonly-used personal computers to do so. The main purpose of this work is to investigate whether or not the whole NAPL dissolution system of an annular domain can be replaced by a trapezoidal domain, so as to greatly reduce the requirements for computer efforts. The related simulation results have demonstrated that when the NAPL dissolution system under consideration is in a subcritical state, if the dissolution pattern around the entrance of an annulus domain is of interest, then a trapezoidal domain cannot be used to replace an annular domain in the computational simulation of the NAPL dissolution system.However, if the dissolution pattern away from the vicinity of the entrance of an annulus domain is of interest, then a trapezoidal domain can be used to replace an annular domain in the computational simulation of the NAPL dissolution system. When the NAPL dissolution system under consideration is in a supercritical state, a trapezoidal domain cannot be used to replace an annular domain in the computational simulation of the NAPL dissolution system.

Sheltering effect of punched steel plate sand fences for controlling blown sand hazards along the Golmud-Korla Railway:Field observation and numerical simulation studies

Sand fences made of punched steel plate(PSP)have recently been applied to control wind-blown sand in desertified and Gobi areas due to their strong wind resistance and convenient in situ construction.However,few studies have assessed the protective effect of PSP sand fences,especially through field observations.This study analyzes the effects of double-row PSP sand fences on wind and sand resistance using field observations and a computational fluid dynamics(CFD)numerical simulation.The results of field observations showed that the average windproof efficiencies of the first-row and second-row sand fences were 79.8%and 70.8%,respectively.Moreover,the average windproof efficiencies of the numerical simulation behind the first-row and second-row sand fences were 89.8%and 81.1%,respectively.The sand-resistance efficiency of the double-row PSP sand fences was 65.4%.Sand deposition occurred close to the first-row sand fence;however,there was relatively little sand on the leeward side of the second-row sand fence.The length of sand accumulation near PSP sand fences obtained by numerical simulation was basically consistent with that through field observations,indicating that field observations combined with numerical simulation can provide insight into the complex wind-blown sand field over PSP sand fences.This study indicates that the protection efficiency of the double-row PSP sand fences is sufficient for effective control of sand hazards associated with extremely strong wind in the Gobi areas.The output of this work is expected to improve the future application of PSP sand fences.

Review on the Prediction of Residual Stress in Welded Steel Components

Residual stress after welding has negative effects on the service life of welded steel components or structures.This work reviews three most commonly used methods for predicting residual stress,namely,empirical,semi-empirical and process simulation methods.Basic principles adopted by these methods are introduced.The features and limitations of each method are discussed as well.The empirical method is the most practical but its accuracy relies heavily on experiments.Mechanical theories are employed in the semi-empirical method,while other aspects,such as temperature variation and phase transformation,are simply ignored.The process simulation method has been widely used due to its capability of handling with large and complex components.To improve its accuracy and efficiency,several improvements need to be done for each simulation aspect of this method.

CFD Simulation and Experimental Study of a New Elastic Blade Wave Energy Converter

Small moving vehicles represent an important category of marine engineering tools and devices(equipment)typically used for ocean resource detection and maintenance of marine rights and interests.The lack of efficient power supply modes is one of the technical bottlenecks restricting the effective utilisation of this type of equipment.In this work,the performance characteristics of a new type of elastic-blade/wave-energy converter(EBWEC)and its core energy conversion component(named wave energy absorber)are comprehensively studied.In particular,computational fluid dynamics(CFD)simulations and experiments have been used to analyze the hydrodynamics and performance characteristics of the EBWEC.The pressure cloud diagrams relating to the surface of the elastic blade were obtained through two-way fluid-solid coupling simulations.The influence of blade thickness and relative speed on the performance characteristics of EBWEC was analyzed accordingly.A prototype of the EBWEC and its bucket test platform were also developed.The power characteristics of the EBWEC were analyzed and studied by using the blade thickness and motion cycle as control variables.The present research shows that the EBWEC can effectively overcome the performance disadvantages related to the transmission shaft torque load and power curve fluctuations of rigid blade wave energy converters(RBWEC).

Refractory Tubes with Innovative Liner Technology for Flow Control and Clean Steel Applications

Ladle shrouds(LS)and submerged entry nozzles(SEN)are flow control products used in continuous casting which transfer the liquid steel from the ladle to the tundish and further to the mould.Due to the strongly different and quickly changing temperature conditions before and during steel casting,highly thermal shock resistant refractory materials are required which simultaneously save steel process energy.A new technology embeds a special liner into the refractory body inner surface to reduce the heat transfer through the LS/SEN wall.To better understand the function of this insulation layer a mathematical model was applied.Temperature measurements carried out in the steel plant were compared with the simulation results.The research results indicate potential heat loss reduction and performance improvements in the steelmaking process.

Subtle Influence of the Weibull Shape Parameter on Homer Optimization Space of a Wind Diesel Hybrid Gen Set for Use in Southern Brazil

Wind power is an increasingly important alternative for obtaining energy supplies, both in large interconnected power systems and in smaller hybrid systems and even in backup systems. The temporal and spatial variability of the winds represent an obstacle to be overcome so that wind energy can be increasingly used. The capacity factor of wind farms shows how this variability impacts the operation of the plants and its value is of the order of 30% to 35%. The variability of the wind speed is influenced if the point of interest is on land or on sea, the shape of the surface, the proximity of water bodies, among other factors. The availability of wind is best described by the Weibull probability distribution, which has as one of its defining parameters one which is termed as shape parameter. This parameter is much higher as higher is the variability of the wind speed. This paper studies the subtle influence of Weibull shape parameter on the optimal combination of components in a wind diesel hybrid system, by means of computer simulations with the well known software Homer. The results indicate a relatively small influence (as expected) in the studied system, which appears particularly when the cost of diesel is higher and the availability of wind is lower.

Computational Fluid Dynamics Analysis of the Aortic Coarctation

In this work, we first investigated the hemodynamic parameters in the case of a normal aortic arch anatomy and in the case of aortic coarctation anatomy, both generated by using CFX-ICEM-ANSYS simulations. Then, we compared these results with those obtained for a proposed model without and with aortic coarctation, while introducing a real tridimensional magnetic resonance imaging geometry in the simulation process. The conclusion is that our proposed model reproduces, with a high agreement, the real case obtained from imaging data.

Applying multi-scale simulations to materials research of nuclear fuels:A review

Computational simulation is an important technical means in research of nuclear fuel materials.Since nuclear fuel issues are inherently multi-scopic,it is imperative to study them with multi-scale simulation scheme.At present,the development of multi-scale simulation for nuclear fuel materials calls for a more systematic approach,in which lies the main purpose of this article.The most important thing in multi-scale simulation is to accurately formulate the goals to be achieved and the types of methods to be used.In this regard,we first summarize the basic principles and applicability of the simulation methods which are commonly used in nuclear fuel research and are based on different scales ranging from micro to macro,i.e.First-Principles(FP),Molecular Dynamics(MD),Kinetic Monte Carlo(KMC),Phase Field(PF),Rate Theory(RT),and Finite Element Method(FEM).And then we discuss the major material issues in this field,also ranging from micro-scale to macro-scale and covering both pellets and claddings,with emphasis on what simulation method would be most suitable for solving each of the issues.Finally,we give our prospective analysis and understanding about the feasible ways of multi-scale integration and relevant handicaps and challenges.

Feasibility Study for Power Generation during Peak Hours with a Hybrid System in a Recycled Paper Mill

The differential pricing for peak hours encourages industrial consumers to look for independent power supplies for the period from 19 to 22 hours. This paper presents a study to identify the optimal solution for a recycled paper mill that also intends to work in that period. The factory is located in Rio Grande do Sul, in southern Brazil, and considers the use of a diesel gen set, a micro hydro power plant and possibly PV modules. Two micro hydro power plants were considered in the study, an old plant to be renewed and another to be fully implemented. The software Homer was used as a tool to determine the most feasible combination of components considered in the study. The sale of surplus power to the energy system appears as a key to viability of alternatives that are not based solely on diesel generators. The optimal solution consists of a combination of diesel generators and micro hydro power plant, in one case, and only on hydroelectric power plant in another, with a significant penetration of PV modules if its cost is reduced to 12% of the current price, selling an amount of energy equal to that which is bought. The annual water availability in one of the sites requires diesel supplement, while the other, more abundant, this supplement is not necessary.

Computational simulation of wave propagation problems in infinite domains

This paper deals with the computational simulation of both scalar wave and vector wave propagation problems in infinite domains. Due to its advantages in simulating complicated geometry and complex material properties, the finite element method is used to simulate the near field of a wave propagation problem involving an infinite domain. To avoid wave reflection and refraction at the common boundary between the near field and the far field of an infinite domain, we have to use some special treatments to this boundary. For a wave radiation problem, a wave absorbing boundary can be applied to the common boundary between the near field and the far field of an infinite domain, while for a wave scattering problem, the dynamic infinite element can be used to propagate the incident wave from the near field to the far field of the infinite domain. For the sake of illustrating how these two different approaches are used to simulate the effect of the far field, a mathematical expression for a wave absorbing boundary of high-order accuracy is derived from a two-dimensional scalar wave radiation problem in an infinite domain, while the detailed mathematical formulation of the dynamic infinite element is derived from a two-dimensional vector wave scattering problem in an infinite domain. Finally, the coupled method of finite elements and dynamic infinite elements is used to investigate the effects of topographical conditions on the free field motion along the surface of a canyon.

Structurally defined tandem-responsive nanoassemblies composed of dipeptide-based photosensitive derivatives and hypoxia-activated camptothecin prodrugs against primary and metastatic breast tumors

Substantial progress in the use of chemo-photodynamic nano-drug delivery systems(nanoDDS) for the treatment of the malignant breast cancer has been achieved. The inability to customize precise nanostructures, however, has limited the therapeutic efficacy of the prepared nano-DDS to date. Here,we report a structurally defined tandem-responsive chemo-photosensitive co-nanoassembly to eliminate primary breast tumor and prevent lung metastasis. This both-in-one co-nanoassembly is prepared by assembling a biocompatible photosensitive derivative(pheophorbide-diphenylalanine peptide, PPADA) with a hypoxia-activated camptothecin(CPT) prodrug [(4-nitrophenyl) formate camptothecin, NCPT]. According to computational simulations, the co-assembly nanostructure is not the classical core-shell type, but consists of many small microphase regions. Upon exposure to a 660 nm laser,PPA-DA induce high levels of ROS production to effectively achieve the apoptosis of normoxic cancer cells. Subsequently, the hypoxia-activated N-CPT and CPT spatially penetrate deep into the hypoxic region of the tumor and suppress hypoxia-induced tumor metastasis. Benefiting from the rational design of the chemo-photodynamic both-in-one nano-DDS, these nanomedicines exhibit a promising potential in the inhibition of difficult-to-treat breast tumor metastasis in patients with breast cancer.

Index of microcirculatory resistance: state-of-the-art and potential applications in computational simulation of coronary artery disease

The dysfunction of coronary microcirculation is an important cause of coronary artery disease(CAD).The index of microcirculatory resistance(IMR)is a quantitative evaluation of coronary microcirculatory function,which provides a significant reference for the prediction,diagnosis,treatment,and prognosis of CAD.IMR also plays a key role in investigating the interaction between epicardial and microcirculatory dysfunctions,and is closely associated with coronary hemodynamic parameters such as flow rate,distal coronary pressure,and aortic pressure,which have been widely applied in computational studies of CAD.However,there is currently a lack of consensus across studies on the normal and pathological ranges of IMR.The relationships between IMR and coronary hemodynamic parameters have not been accurately quantified,which limits the application of IMR in computational CAD studies.In this paper,we discuss the research gaps between IMR and its potential applications in the computational simulation of CAD.Computational simulation based on the combination of IMR and other hemodynamic parameters is a promising technology to improve the diagnosis and guide clinical trials of CAD.

Theoretical modeling and numerical simulations of plasmas generated by shock waves

Electromagnetic(EM) field is a consequence of the plasma generation induced by shock waves generated in impacts and explosions and is an important topic of study in aerospace and geophysics. Experimental research is frequently used to investigate the plasma generation in hypervelocity impacts and the EM wave emitted in chemical explosions. However, the basic plasma generation mechanism leading to the EM emission generated by the shock waves in chemical explosions is rarely studied.Therefore, a detailed investigation is performed to determine the state of the plasmas generated by the shock waves in air blast. In addition, a multi-component ionization model was improved to evaluate the ionization state of the generated plasmas. The proposed ionization model was combined with an AUSM+-up based finite volume method(FVM) to simulate the plasmas generated in the air blast. Two typical cases of simulation were carried out to investigate the relation between the shock waves and ionization, as well as the influence of ground reflection on the ionization state. It was found that the ionization zone was close behind the shock front in the air and propagates along with the shock waves. The interaction between the original shock waves and reflected shock waves was found to have a great impact of the order of 2–3 magnitudes, on the degree of ionization of the plasmas generated by the shock waves. This phenomenon explains the observation of additional EM pulses generated by ground reflection, as explored in the reference cited in this paper.

A Brief Review of Elasticity and Viscoelasticity for Solids

There are a number of interesting applications where modeling elastic and/or viscoelastic materials is fundamental,including uses in civil engineering,the food industry,land mine detection and ultrasonic imaging.Here we provide an overview of the subject for both elastic and viscoelastic materials in order to understand the behavior of these materials.We begin with a brief introduction of some basic terminology and relationships in continuum mechanics,and a review of equations of motion in a continuum in both Lagrangian and Eulerian forms.To complete the set of equations,we then proceed to present and discuss a number of specific forms for the constitutive relationships between stress and strain proposed in the literature for both elastic and viscoelastic materials.In addition,we discuss some applications for these constitutive equations.Finally,we give a computational example describing the motion of soil experiencing dynamic loading by incorporating a specific form of constitutive equation into the equation of motion.

The effects of caudal fin deformation on the hydrodynamics of thunniform swimming under self-propulsion

To investigate the effects of the caudal fin deformation on the hydrodynamic performance of the self-propelled thunniform swimming,we perform fluid-body interaction simulations for a tuna-like swimmer with thunniform kinematics.The 3-D vortices are visualized to reveal the role of the leading-edge vortex(LEV)in the thrust generation.By comparing the swimming velocity of the swimmer with different caudal fin flexure amplitudes fa,it is shown that the acceleration in the starting stage of the swimmer increases with the increase of fa,but its cruising velocity decreases.The results indicate that the caudal fin deformation is beneficial to the fast start but not to the fast cruising of the swimmer.During the entire swimming process,the undulation amplitudes of the lateral velocity and the yawing angular velocity decrease as fa increases.It is found that the formation of an attached LEV on the caudal fin is responsible for generating the low-pressure region on the surface of the caudal fin,which contributes to the thrust.Furthermore,the caudal fin deformation can delay the LEV shedding from the caudal fin,extending the duration of the low pressure on the caudal fin,which will cause the caudal fin to generate a drag-type force over a time period in one swimming cycle and reduce the cruising speed of the swimmer.

Numerical study on morphological characteristics of rotational natural supercavitation by rotational supercavitating evaporator with optimized blade shape

In view of the supercavitation effect, a novel device named the rotational supercavitating evaporator (RSCE) has been designed for the desalination. In order to improve the blade shape of the rotational cavitator in the RSCE for the performance optimization, the blade shapes of different sizes are designed by utilizing the improved calculation method for the blade shape and the validated empirical formulae based on previous two-dimensional numerical simulations, from which the optimized blade shape with the wedge angle of 45° and the design speed of 5 000 r/min is selected. The estimation method for the desalination performance parameters is developed to validate the feasibility of the utilization of the results obtained by the two-dimensional numerical simulations in the design of the three-dimensional blade shape. Three-dimensional numerical simulations are then conducted for the supercavitating flows around the rotational cavitator with the optimized blade shape at different rotational speeds to obtain the morphological characteristics of the rotational natural supercavitation. The results show that the profile of the supercavity tail is concaved toward the inside of the supercavity due to the re-entrant jet. The empirical formulae for estimating the supercavity size with consideration of the rotation are obtained by fitting the data, with the exponents different from those obtained by the previous two-dimensional numerical simulations. The influences of the rotation on the morphological characteristics are analyzed from the perspectives of the tip and hub vortices and the interaction between the supercavity tail and the blade. Further numerical simulation of the supercavitating flow around the rotational cavitator made up by the blades with exit edge of uniform thickness illustrate that the morphological characteristics are also affected by the blade shape.

块体金属玻璃结构-动力学关联模拟研究的临界模型尺度

原子尺度模拟是当前理解金属玻璃体系的无序结构及其构效关系的有效方法.基于分子动力学模拟,本文以代表性金属玻璃Cu_(5)0Zr_(50)为研究对象,系统地研究了块体金属玻璃体系的原子结构和动力学行为的有限尺度效应.通过研究发现,其结构短程序对模型尺寸并不敏感,但其动力学性质却表现出明显的尺寸相关性.通过定量计算可知,当立方体模型所含原子数低于~2000时,金属玻璃体系的结构短程序特征和结构弛豫之间的相关性发生退简并,但其结构弛豫时间和动力学非均匀性依然遵循简并的普适关系.本文的结论给出了结构弛豫和动力学非均匀性之间存在本征关联的有力证据,并第一次明确给出了在没有表面效应的情况下基于计算模拟研究块体金属玻璃结构、动力学及其关联所需要的临界模型尺度.