Based on auditory peripheral simulation model, a new Sound Quality Objective Evaluation (SQOE) method is presented,which can be used to model and analyze the impacts of head, shoulder and other parts of human body on ...Based on auditory peripheral simulation model, a new Sound Quality Objective Evaluation (SQOE) method is presented,which can be used to model and analyze the impacts of head, shoulder and other parts of human body on sound wave trans-mission.This method employs the artificial head technique, in which the head related transfer function was taken into account tothe outer ear simulation phase.First, a bionic artificial head was designed as the outer ear model with considering the outersound field in view of theory and physical explanations.Then the auditory peripheral simulation model was built, which mimicsthe physiological functions of the human hearing, simulating the acoustic signal transfer process and conversion mechanismsfrom the free field to the peripheral auditory system.Finally, performance comparison was made between the proposed SQOEmethod and ArtemiS software, and the verifications of subjective and objective related analysis were made.Results show thatthe proposed method was economical, simple, and with good evaluation quality.展开更多
To improve the agility, dynamics, composability, reusability, and development efficiency restricted by monolithic federation object model （FOM）, a modular FOM is proposed by high level architecture （HLA） evolved p...To improve the agility, dynamics, composability, reusability, and development efficiency restricted by monolithic federation object model （FOM）, a modular FOM is proposed by high level architecture （HLA） evolved product development group. This paper reviews the state-of-the-art of HLA evolved modular FOM. In particular, related concepts, the overall impact on HLA standards, extension principles, and merging processes are discussed. Also permitted and restricted combinations, and merging rules are provided, and the influence on HLA interface specification is given. The comparison between modular FOM and base object model （BOM） is performed to illustrate the importance of their combination. The applications of modular FOM are summarized. Finally, the significance to facilitate compoable simulation both in academia and practice is presented and future directions are pointed out.展开更多
As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simul...As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.展开更多
In recent years, modelling crowd and evacuation dynamics has become very important, with increasing huge numbers of people gathering around the world for many reasons and events. The fact that our global population gr...In recent years, modelling crowd and evacuation dynamics has become very important, with increasing huge numbers of people gathering around the world for many reasons and events. The fact that our global population grows dramatically every year and the current public transport systems are able to transport large amounts of people heightens the risk of crowd panic or crush. Pedestrian models are based on macroscopic or microscopic behaviour. In this paper, we are interested in developing models that can be used for evacuation control strategies. This model will be based on microscopic pedestrian simulation models, and its evolution and design requires a lot of information and data. The people stream will be simulated, based on mathematical models derived from empirical data about pedestrian flows. This model is developed from image data bases, so called empirical data, taken from a video camera or data obtained using human detectors. We consider the individuals as autonomous particles interacting through social and physical forces, which is an approach that has been used to simulate crowd behaviour. The target of this work is to describe a comprehensive approach to model a huge number of pedestrians and to simulate high density crowd behaviour in overcrowding places, e.g. sport, concert and pilgrimage places, and to assist engineering in the resolution of complicated problems through integrating a number of models from different research domains.展开更多
The simulation-based decision support system (SBDSS) is designed to achieve a highlevel of performance, flexibility and adaptability, in response to meet the special needs of productionand logistics management during ...The simulation-based decision support system (SBDSS) is designed to achieve a highlevel of performance, flexibility and adaptability, in response to meet the special needs of productionand logistics management during the economic system reform era in China. It consists two subsys-tems: the object library modeler (OLM) and the simulation engine and its manager (SEM). UsingSBDSS the decision makers can work out their optimal production choice under certain circumstancesthrough scenario simulations. And they can test a set of virtual organizations reflecting systems re-form before a real reorganization has been taken, as well as perform a virtual manufacturing processfor a new product design (Copyright @ 1998 IFAC).展开更多
土地利用冲突是区域土地开发利用过程中存在的客观问题,对区域经济社会发展和生态安全具有重要影响。识别、测度区域土地利用冲突,明晰其时空演化格局,有助于优化区域土地利用结构,促进土地资源的可持续利用。以重庆市为例,基于景观格...土地利用冲突是区域土地开发利用过程中存在的客观问题,对区域经济社会发展和生态安全具有重要影响。识别、测度区域土地利用冲突,明晰其时空演化格局,有助于优化区域土地利用结构,促进土地资源的可持续利用。以重庆市为例,基于景观格局构建了土地利用冲突测度模型,从县域、镇域以及格网3个尺度全面和系统地分析了1995—2020年重庆市土地利用冲突的时空演化特征,并耦合多目标规划(Multi-Objective Programming,MOP)-斑块生成土地利用变化模拟模型(Ptach-generating Land Use Simulation,PLUS)模拟了重庆市2030年不同发展情景下土地利用冲突格局。结果表明:(1)1995—2020年重庆市县域、镇域与格网不同尺度下的土地利用冲突格局具有较大相似性,不同尺度的土地利用重度冲突区主要分布在重庆中心城区及周边地区,区县建成区。土地利用一般冲突区主要分布于渝东南和渝东北地区。研究期内土地利用冲突有所加剧,其中土地利用重度冲突区占比增加了3.09%。(2)1995—2005年重庆市土地利用冲突区主体位于乡村地域,但冲突程度较低,随着工业化、城市化进程及人口的集聚,2005年后土地利用冲突热点区域的城市地域集聚效应显著,城市及周边地区土地利用冲突区面积和土地利用冲突度均显著提升。(3)区域土地利用冲突空间格局不仅受到了人为经济社会活动的驱动影响,在空间格局上受自然生态环境基底影响显著,其中地形地貌的限制加剧了土地利用重度冲突区。(4)不同发展情景模拟中经济优先发展情景下土地利用冲突最为严重,生态优先发展情景下土地利用冲突最小,可持续发展情景兼顾了经济和生态发展的用地需求,土地利用冲突强度处于中间范围,但区域发展总福利最大,是未来区域发展路径最优选择。展开更多
校核、验证与确认(verification,validation,and accreditation,VV&A)是保证仿真模型可信度的关键手段,其中模型验证是核心环节。针对导弹飞行仿真模型结果验证存在的参考数据不可获得、参考数据来源多样、专家验证主观性强等问题,...校核、验证与确认(verification,validation,and accreditation,VV&A)是保证仿真模型可信度的关键手段,其中模型验证是核心环节。针对导弹飞行仿真模型结果验证存在的参考数据不可获得、参考数据来源多样、专家验证主观性强等问题,提出一种基于时间序列分段特征提取的导弹飞行仿真模型结果验证方法。提出了一种综合的时间序列分段线性方法,由基于二阶导数提取趋势边缘点的线性分段算法和基于极值点优化的Top-Down线性分段算法两部分组成,以实现对导弹飞行仿真数据和参考数据进行有效的线性分段表示。基于上述分段结果,对各段时间序列的均值、方差、斜率等特征进行提取,以辅助专家进行验证,从而降低验证中的主观性;或者直接利用TIC系数法、动态时间规整(dynamic time warping,DTW)等方法进行客观的相似性分析。通过充分利用时间序列的分段特征,可实现各种情形下的导弹飞行仿真模型结果验证。通过一个导弹模型结果验证案例演示了所提方法的可行性和有效性。展开更多
文摘Based on auditory peripheral simulation model, a new Sound Quality Objective Evaluation (SQOE) method is presented,which can be used to model and analyze the impacts of head, shoulder and other parts of human body on sound wave trans-mission.This method employs the artificial head technique, in which the head related transfer function was taken into account tothe outer ear simulation phase.First, a bionic artificial head was designed as the outer ear model with considering the outersound field in view of theory and physical explanations.Then the auditory peripheral simulation model was built, which mimicsthe physiological functions of the human hearing, simulating the acoustic signal transfer process and conversion mechanismsfrom the free field to the peripheral auditory system.Finally, performance comparison was made between the proposed SQOEmethod and ArtemiS software, and the verifications of subjective and objective related analysis were made.Results show thatthe proposed method was economical, simple, and with good evaluation quality.
基金supported by the National Natural Science Foundation of China(6067406960574056).
文摘To improve the agility, dynamics, composability, reusability, and development efficiency restricted by monolithic federation object model （FOM）, a modular FOM is proposed by high level architecture （HLA） evolved product development group. This paper reviews the state-of-the-art of HLA evolved modular FOM. In particular, related concepts, the overall impact on HLA standards, extension principles, and merging processes are discussed. Also permitted and restricted combinations, and merging rules are provided, and the influence on HLA interface specification is given. The comparison between modular FOM and base object model （BOM） is performed to illustrate the importance of their combination. The applications of modular FOM are summarized. Finally, the significance to facilitate compoable simulation both in academia and practice is presented and future directions are pointed out.
基金supported by National Natural Science Foundation of China (Grant No.50875101)National Hi-tech Research and Development Program of China (863 Program,Grant No.2007AA04Z186)
文摘As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.
文摘In recent years, modelling crowd and evacuation dynamics has become very important, with increasing huge numbers of people gathering around the world for many reasons and events. The fact that our global population grows dramatically every year and the current public transport systems are able to transport large amounts of people heightens the risk of crowd panic or crush. Pedestrian models are based on macroscopic or microscopic behaviour. In this paper, we are interested in developing models that can be used for evacuation control strategies. This model will be based on microscopic pedestrian simulation models, and its evolution and design requires a lot of information and data. The people stream will be simulated, based on mathematical models derived from empirical data about pedestrian flows. This model is developed from image data bases, so called empirical data, taken from a video camera or data obtained using human detectors. We consider the individuals as autonomous particles interacting through social and physical forces, which is an approach that has been used to simulate crowd behaviour. The target of this work is to describe a comprehensive approach to model a huge number of pedestrians and to simulate high density crowd behaviour in overcrowding places, e.g. sport, concert and pilgrimage places, and to assist engineering in the resolution of complicated problems through integrating a number of models from different research domains.
文摘The simulation-based decision support system (SBDSS) is designed to achieve a highlevel of performance, flexibility and adaptability, in response to meet the special needs of productionand logistics management during the economic system reform era in China. It consists two subsys-tems: the object library modeler (OLM) and the simulation engine and its manager (SEM). UsingSBDSS the decision makers can work out their optimal production choice under certain circumstancesthrough scenario simulations. And they can test a set of virtual organizations reflecting systems re-form before a real reorganization has been taken, as well as perform a virtual manufacturing processfor a new product design (Copyright @ 1998 IFAC).
文摘土地利用冲突是区域土地开发利用过程中存在的客观问题,对区域经济社会发展和生态安全具有重要影响。识别、测度区域土地利用冲突,明晰其时空演化格局,有助于优化区域土地利用结构,促进土地资源的可持续利用。以重庆市为例,基于景观格局构建了土地利用冲突测度模型,从县域、镇域以及格网3个尺度全面和系统地分析了1995—2020年重庆市土地利用冲突的时空演化特征,并耦合多目标规划(Multi-Objective Programming,MOP)-斑块生成土地利用变化模拟模型(Ptach-generating Land Use Simulation,PLUS)模拟了重庆市2030年不同发展情景下土地利用冲突格局。结果表明:(1)1995—2020年重庆市县域、镇域与格网不同尺度下的土地利用冲突格局具有较大相似性,不同尺度的土地利用重度冲突区主要分布在重庆中心城区及周边地区,区县建成区。土地利用一般冲突区主要分布于渝东南和渝东北地区。研究期内土地利用冲突有所加剧,其中土地利用重度冲突区占比增加了3.09%。(2)1995—2005年重庆市土地利用冲突区主体位于乡村地域,但冲突程度较低,随着工业化、城市化进程及人口的集聚,2005年后土地利用冲突热点区域的城市地域集聚效应显著,城市及周边地区土地利用冲突区面积和土地利用冲突度均显著提升。(3)区域土地利用冲突空间格局不仅受到了人为经济社会活动的驱动影响,在空间格局上受自然生态环境基底影响显著,其中地形地貌的限制加剧了土地利用重度冲突区。(4)不同发展情景模拟中经济优先发展情景下土地利用冲突最为严重,生态优先发展情景下土地利用冲突最小,可持续发展情景兼顾了经济和生态发展的用地需求,土地利用冲突强度处于中间范围,但区域发展总福利最大,是未来区域发展路径最优选择。
文摘校核、验证与确认(verification,validation,and accreditation,VV&A)是保证仿真模型可信度的关键手段,其中模型验证是核心环节。针对导弹飞行仿真模型结果验证存在的参考数据不可获得、参考数据来源多样、专家验证主观性强等问题,提出一种基于时间序列分段特征提取的导弹飞行仿真模型结果验证方法。提出了一种综合的时间序列分段线性方法,由基于二阶导数提取趋势边缘点的线性分段算法和基于极值点优化的Top-Down线性分段算法两部分组成,以实现对导弹飞行仿真数据和参考数据进行有效的线性分段表示。基于上述分段结果,对各段时间序列的均值、方差、斜率等特征进行提取,以辅助专家进行验证,从而降低验证中的主观性;或者直接利用TIC系数法、动态时间规整(dynamic time warping,DTW)等方法进行客观的相似性分析。通过充分利用时间序列的分段特征,可实现各种情形下的导弹飞行仿真模型结果验证。通过一个导弹模型结果验证案例演示了所提方法的可行性和有效性。
