A Discrete Event Simulation Support System in C^(++)

This paper describes a discrete simulation support system that forms major parts of most simulation program. The support system contains three main features which differ from the most of other simulation support systems. It follows a strict three phase structure; supports visual interactive simulation. The principles of designing and implementing of the system are explained module by module.

Support technology for mine roadways in extreme weakly cemented strata and its application

For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, l-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.

Combinatorial Method of Simulation and Optimization and Its Application on Transportation System

Combinatorial method of simulation and optimization can combine the merits of both methods, provide effectively simulation support for transportation decision maldng.In tills paper, the simulation and optimization models for a transportation system of coal wharf are introduced, and their combination mechanism for constructing a simulation support system is presented.

Deformation failure mechanism and application of the backfill along the goaf-side retained roadway

In order to determine the rational width of backfill in the goaf-side retained roadway, the deformation failure mechanism of surrounding rock in retained roadway is studied in the use of theoretical analysis, numerical simulation, etc., when the width of backfill is different. The results show that: with the increase of backfill width, the roof deformation above the backfill decreases; the outside of backfill obviously suffers from greater stress compared to the inner side of backfill; the damage firstly appears in the intersection of top backfill and roof; the plastic failure area is mainly distributed in the roof and floor of inside the roadway; 2 m wide backfill in the goaf-side retained roadway can meet the requirements of roadway deformation. Based on the original combination support of "anchor-mesh-belt-lock" in the haulage-track roadway, the study also considers the reinforced support of "anchor-mesh-belt" above the backfill, and 50 m ahead of working face, and 200 m behind the working face. This kind of support achieves a good result. The roadway deformation of field measurement shows that it can satisfy the need of the next working face.

Deformation control of asymmetric floor heave in a deep rock roadway:A case study

In order to control asymmetric floor heave in deep rock roadways and deformation around the surrounding rock mass after excavation, in this paper we discuss the failure mechanism and coupling control countermeasures using the finite difference method （FLAC^3D） combined with comparative analysis and typical engineering application at Xingcun coal mine, It is indicated by the analysis that the simple symmetric support systems used in the past led to destruction of the deep rock roadway from the key zone and resulted in the deformation of asymmetric floor heave in the roadway. Suitable rein- forced support countermeasures are proposed to reduce the deformation of the floor heave and the potential risk during mining. The application shows that the present support technology can he used to better environmental conditions. The countermeasures of asymmetric coupling support can not only effectively reduce the discrepancy deformation at the key area of the surrounding rock mass, hut also effectively control floor heave, which helps realize the integration of support and maintain the stability of the deep rock roadways at Xingcun coal mine.

Construction and stability of an extra-large section chamber in solid backfill mining

In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation equipments. For the construction of an extra-large section chamber in the Tangshan mine, we proposed an active support through a combination of bolting, anchor cables, lining, and a reinforced chamber floor by inverted arch pouring. ABAQUS software was used to analyze the surrounding rock deformation and the plastic zone development of the chamber under different excavation schemes.The best excavation scheme was determined, and the effectiveness of the combined supports was verified. In practice, the engineering installation showed good overall control of the movement of the surrounding rock, with roof-to-floor and side-to-side convergences of 154.6 and 77.5 mm, respectively,which meets the requirements for underground coal gangue separation.

Research on system architecture of modeling and simulation

The modeling and simulation(M&S)architecture describes and defines the relationship between the different parts of a simulation.The simulation system architecture and simulation support platform architecture are discussed separately.The simulation support platform architecture consists of the management layer,the resource layer,the communication layer,the application layer and the infrastructure layer.The best way is to design and realize the M&S collaborative environment for simulation support platform in the resource-communication-application three-dimension space.