Design of DC regulated power supply based on single chip microcomputer

A DC regulated power supply with numerical control based on single chip microcomputer （SCM） is designed. SCM is the main controller and output voltage o{ DC power supply can be set by keyboard. The analog voltage can be obtained through D/A converter （DAC0832） so that different voltages can be provided by operational amplifier. The output voltage varies from 0 V to 12 V with the incremental value of 0. 1 V. The actual output voltage is shown in the nixietube. This DC regulated power supply is characterized by simple structure and easy operation.

Design of Intelligent Fire Alarm System for Large Storage Places Based on AVRmega128 Single Chip Microcomputer

With principles of reliability, independence, practicality and economical effi- ciency, a set of intelligent fire alarm system based on AVRmega128 single chip microcomputer was designed to solve problems of fire alarm system in many large- scale warehouses. Using advanced flame sensor, 485 bus communication, computer interactive software and related peripheral devices, this intelligent fire alarm system has functions of sound-light alarm and intelligent fire extinguishing. The human-com- puter interactive software was adopted for the remote control of the alarm main control panel through the 485 bus communication. This design of intelligent fire alarm system shows high reference and practical value to the development of intel- ligent alarm products with high integration and high reliability.

The Application of Multitasking Mechanism in Single Chip Computer System

Developed a new program structure using in single chip computer system, which based on multitasking mechanism. Discussed the specific method for realization of the new structure. The applied sample is also provided.

Use of single chip microcomputer in hydraulic digital adaptive control system

Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.

DESIGNOFMULTI┐SLOTANDUNEQUAL┐TEMPERATUREPIDCONTROLLERBASEDONSINGLECHIPMICROCOMPUTER

Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented.

Design and Research of Intelligent Alcohol Detector Based on Single Chip Microcomputer

In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance.

Design of an Automated Sorting System for Apples Based on Single Chip Microcomputer

The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic.

MEASUREMENT TECHNOLOGY OF HEAT AND COOL

The popularization of large scale central air conditioning system (CACS) has brought forward a new pro blem,i.e. how to measure the cooling and heating quantum accurately. This problem will directly affect the qua lity of modern property management. So the study on the technology of measuring heat and cool is very necessary. In this paper, the detailed thermal analysis and the mathematical model of relative parameters that affect the measurement of heat and cool are discussed. A sample instrument based on the model is made, After the trial use by several customers, the device is proved to be practical, worthwhile and of good capacity.

STUDYONANEWKINDOFPOWDER－FEEDINGAPPARATUSOFFLUX－COREDWIREPRODUCTIONLINE

A set of electromagnetic vibration powder feeding apparatus of the flux cored wire production line and its single chip controlling system have been designed in this paper. The parameters of the electromagnatic vibration powder feeding apparatus have been tested, the functional relation between powder feeding velocity V L and current I has been made out so that the controlling system can not only automatically make out the quantity of the powder according to the width of the steel belt, powder density, production speed and filling ratio, but also adjust the powder feeding speed according to the real production speed, keeping a stable filling ratio.

Non-invasive glucose measuring apparatus based on conservation of energy method

A new non-invasive blood glucose measuring apparatus (NBGMA) made up of MSP430F149 SCM (single chip micyoco) was developed,which can measure blood glucose level (BGL) frequently,conveniently and painlessly. The hardware and software of this apparatus were designed,and detecting algorithms based on conservation of energy method (COEM) were presented. According to the law of conservation of energy that the energy derived by human body equals energy consumed by metabolism,and the relationship between convection,evaporation,radiation and the BGL was established. The sensor module was designed. 20 healthy volunteers were involved in the clinical experiment. The BGL measured by an automatic biochemical analyzer (ABA) was set as the reference. Regression analysis was performed to compare the conservation of energy method with the biochemical method,using the 20 data points with blood glucose concentrations ranging from 680 to 1 100 mg/L. Reproducibility was measured for healthy fasting volunteers. The results show that the means of BGL detected by NBGMA and ANA are very close to each other,and the difference of standard deviation (SD) is 24.7 mg/L. The correlative coefficient is 0.807. The coefficient of variation (CV) is 4% at 921.6 mg/L. The resultant regression is evaluated by the Clarke error grid analysis (EGA) and all data points are included in the clinically acceptable regions (region A:100%,region B:0%). Accordingly,it is feasible to measure BGL with COEM.

The Design of PSM-Based ECRH Power Supply Control System

Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.

Research on Car Reversing Warning System based on CAN Bus

The paper study the software and hardware principles of ultrasonic ranging reversing radar, design the vehicle reversing radar based on intelligent node of CAN bus, realize data communication and resource sharing with other intelligent nodes of the reversing radar. The experimental results show that, the design can achieve the expected technical indicators design, measurement precision and the reliability is high, which has certain guiding significance in the design of the car reversing radar, has wide application prospect and practical significance in the function of the extended CAN bus communication messages design and automotive CAN network.

Microwave photonic filter with a continuously tunable central frequency using an SOI high-Q microdisk resonator

Utilizing a high-Q microdisk resonator （MDR） on a single silicon-on-insulator （SOI） chip, a compact microwave photonic filter （MPF） with a continuously tunable central frequency is proposed and experimentally demonstrated. Assisted by the optical single side-band （OSSB） modulation, the optical frequency response of the MDR is mapped to the microwave frequency response to form an MPF with a continuously tunable central frequency and a narrow 3-dB bandwidth. In the experiment, using an MDR with a compact size of 20×20 μm^2 and a high Q factor of 1.07×10^5, we obtain a compact MPF with a high rejection ratio of about 40 dB, a 3-dB bandwidth of about 2 GHz, and a frequency tuning range larger than 12 GHz. Our approach may allow the implementation of very compact, low-cost, low-consumption, and integrated notch MPF in a silicon chip.

Samplesystemofelectromagneticwavetomog┐raphy

Ｓａｍｐｌｅｓｙｓｔｅｍｏｆｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｗａｖｅｔｏｍｏｇ┐ｒａｐｈｙＹＵＮ－ＴＩＡＮＴＥＮＧ（滕云田）ａｎｄＨＥ－ＭＩＮＧＺＨＯＵ（周鹤鸣）ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐｈｙｓｉｃｓ，ＳｔａｔｅＳｅｉｓｍｏｌｏｇｉｃａｌＢｕｒｅ...

PN code generator based on generalized Bent function for SW/SFH System

Generalized Bent function and generalized Bent function sequences are introduced in this paper.The main performance or these sequences used as SW/SFH(Short Wave/Slow Frequency Hopping) code are studied. And the hardware circuit and the soflware program flow chart of the SW/SFH PN code generator are also given,which is based on generalized Bent function sequence generator by using a single chip mlcrocomputer.

Integrated Control System of Vehicle ABS/ASR/ACC Based onMC9S12DP256

The integrated control system of vehicle ABS/ASR/ACC has been developed using the MC9S12DP256 single chip, which is the new Motorola 16-bit product in HSC12 family. The system including the main control module, the data collection module and the drive and fault diagnosis module is demonstrated and its data collection function is presented in detail. The system designed by the modularization can supervise the data, drive the valves and pump. The program can be debugged on line, which is steady and reliable validated by the large numbers of vehicle road tests.

Plasma spraying system with distributed controlling

A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.

Fuzzy control of carbon dioxide short circuit transfer welding based on reducing dependence of operating skills

In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two fuzzy controller are designed. The PID parameter self adjusting fuzzy controller is used to compensate welding current deviation in the process of arc voltage optimized control. To obtain the optimum result of ultimate frequency of short circuit transfer, the self optimizing fuzzy controller carries out the arc voltage self optimizing by under the condition of the given welding current. Arc voltage and welding current are kept the optimum matching relationship by two fuzzy controllers.

Application research of radio communication in mine alarm system

In this paper, the configuration characteristic of the safe parameter measurement and alarm system in new type mine was first simply introduced, which is made up of topological structure and combines wire communication with radio communication, then introduced respectively the hardware and software construction and the working principle and the method of design, which is composed of detecting instrument as the core of enhanced single chip microcomputer AT89S8252 and relay station and CPU which consists of IPC. The three class computer communication system that integrates with measurement and alarm and management works reliably and uses conveniently, especially to thesystem of parameter detecting and alarm in mine, which is adapted to measure dispersedly and manage intensively.

Research on Intelligent Positioning Bed of Body Gamma Knife Based on Sensor

This paper introduces a design to improve the radiotherapy accuracy of gamma knife. In this design, sensor is used to collect respiratory parameters and tumor displacement (caused by human respiration) model is established through optimization modeling. At the same time, data are transferred to single chip microcomputer (SCM) system by pressure sensor and then stepping motor is controlled by SCM. Finally, the intelligent positioning bed is under the control of stepping motor. As a result, the intelligent positioning bed can move reverse to respiratory law. The experimental results showed that this method can reduce the influence of respiration on tumor displacement, improving the accuracy of intelligent positioning bed with simple circuit and low cost at the same time.