Improvement of Binocular Reconstruction Algorithm for Measuring 3D Pavement Texture Using a Single Laser Line Scanning Constraint

The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function.To form dense mandatory constraints and improve matching accuracy,the traditional binocular reconstruction technology was improved threefold.First,a single moving laser line was introduced to carry out global scanning constraints on the target,which would well overcome the difficulty of installing and recognizing excessive laser lines.Second,four kinds of improved algorithms,namely,disparity replacement,superposition synthesis,subregion segmentation,and subregion segmentation centroid enhancement,were established based on different constraint mechanism.Last,the improved binocular reconstruction test device was developed to realize the dual functions of 3D texture measurement and precision self-evaluation.Results show that compared with traditional algorithms,the introduction of a single laser line scanning constraint is helpful in improving the measurement’s accuracy.Among various improved algorithms,the improvement effect of the subregion segmentation centroid enhancement method is the best.It has a good effect on both overall measurement and single pointmeasurement,which can be considered to be used in pavement function evaluation.

Mapping of QTLs Related to Grain Weight Using Chromosome Single Segment Substitution Lines in Rice

Grain weight, one of the major factors determining rice yield, is a typical quantitative trait control ed by multiple genes. With Guangluai 4 as recipient and Nipponbare as donor, a population of 119 chromosome single segment substitution lines had been developed. Correlation analysis between grain weight and grain shape by SPSS revealed that 1 000-grain weight shared extremely significant posi-tive correlation with grain length and length-width ratio, but no significant correlation with grain width and thickness. The QTL analysis of grain weight was carried out using one-way analysis of variance and Dunnett＇s test. Nineteen stable QTLs re-sponsible for grain weight were identified over two years. Al 19 QTLs were identi-fied on al chromosomes except for chromosome 10 and 12 at a significance level of P≤0.001. Among them, 10 QTLs had a positive effect and were derived from the Nipponbare al ele, the additive effect of these QTLs ranged from 0.49 to 2.74 g, and the contributions of the additive effects ranged from 2.00% to 11.05%. Another 9 QTLs had a negative effect and were al derived from Guangluai 4 al ele, the ad-ditive effect of these QTLs ranged from 0.60 to 2.35 g, and the contributions of the additive effects ranged from 2.40% to 9.84%. The results provide a basis for the fine mapping and gene cloning of novel locus associated with rice grain weight.

Identification of QTLs for Plant Height and Its Components by Using Single Segment Substitution Lines in Rice (Oryza sativa)

QTLs for plant height and its components on the substituted segments of fifty-two single segment substitution lines （SSSLs） in rice were identified through t-test （P〈0.001） for comparison between each SSSL and recipient parent Huajingxian 74. On the 14 substituted segments, 24 QTLs were detected, 10 for plant height, 2 for panicle length, 4 for length of the first internode from the top, 5 for length of the second internode from the top and 3 for length of the third internode from the top, respectively. All these QTLs were distributed on nine rice chromosomes except chromosomes 5, 9 and 11. The additive effect ranged from -4.08 to 3.98 cm, and the additive effect percentages varied from -19.35% to 10.43%.

Unconditional and Conditional QTL Mapping for Tiller Numbers at Various Stages with Single Segment Substitution Lines in Rice(Oryza sativa L.)

Tiller is one of the most important agronomic traits which influences quantity and quality of effective panicles and finally influences yield in rice. It is important to understand ＂static＂ and ＂dynamic＂ information of the QTLs for tillers in rice. This work was the first time to simultaneously map unconditional and conditional QTLs for tiller numbers at various stages by using single segment substitution lines in rice. Fourteen QTLs for tiller number, distributing on the corresponding substitution segments of chromosomes 1, 2, 3, 4, 6, 7 and 8 were detected. Both the number and the effect of the QTLs for tiller number were various at different stages, from 6 to 9 in the number and from 1.49 to 3.49 in the effect, respectively. Tiller number QTLs expressed in a time order, mainly detected at three stages of 0-7 d, 14-21 d and 35-42 d after transplanting with 6 positive, 9 random and 6 negative expressing QTLs, respectively. Each of the QTLs expressed one time at least during the whole duration of rice. The tiller number at a specific stage was determined by sum of QTL effects estimated by the unconditional method, while the increasing or decreasing number in a given time interval was controlled by the total of QTL effects estimated by the conditional method. These results demonstrated that it is highly effective and accurate for mapping of the QTLs by using single segment substitution lines and the conditional analysis methodology.

Identification of Multiple Alleles at the Wx Locus and Development of Single Segment Substitution Lines for the Alleles in Rice

The microsatellite markers 484/485 and 484/W2R were used to identify the multiple alleles at the Wx locus in rice germplasm. Fifteen alleles were identified in 278 accessions by using microsatellite class and G-T polymorphism. Among these alleles, （CT）12-G, （CT）15-G, （CT）16-G, （CT）17-G, （CT）18-G and （CT）21-G have not been reported. Seventy-two single-segment substitution lines （SSSLs） carrying different alleles at the Wx locus were developed by using Huajingxian 74 with the （CT）11-G allele as a recipient and 20 accessions containing 12 different alleles at the Wx locus as donors. The estimated length of the substituted segments ranged from 2.2 to 77.3 cM with an average of 17.4 cM.

QTL Detection for Rice Grain Shape Using Chromosome Single Segment Substitution Lines

Rice grain shape is one of the important factors affecting grain quality and yield,but it is liable to be influenced by genetic backgrounds and environments.The chromosome single segment substitution lines(SSSLs) in rice have been considered as ideal populations to identify the quantitative trait loci(QTLs).In this study,22 QTLs affecting rice grain shape were detected to be distributed on eight chromosomes except chromosomes 6,9,11 and 12 by using SSSLs.Among them,seven QTLs conditioned grain length,six conditioned grain width,five affected grain length-width ratio and four controlled grain thickness.

QTL Detection and Epistasis Analysis for Heading Date Using Single Segment Substitution Lines in Rice(Oryza sativa L.)

Heading date of rice is a key agronomic trait determining cultivated areas and seasons and affecting yield. In the present study, ifve primary single segment substitution lines with the same genetic background were used to detect quantitative trait loci （QTLs） for heading date in rice. Two QTLs, qHD3 and qHD6 on the short arm of chromosome 3 and the short arm of chromosome 6, respectively, were identiifed under natural long-day （NLD）. Nineteen secondary single segment substitution lines （SSSLs） and seven double segments pyramiding lines were designed to map the two QTLs and to evaluate their epistatic interaction between them. By overlapping mapping, qHD3 was mapped in a 791-kb interval between SSR markers RM3894 and RM569 and qHD6 in a 1 125-kb interval between RM587 and RM225. Results revealed the existence of epistatic interaction between qHD3 and qHD6 under natural long-day （NLD）. It was also found that qHD3 and qHD6 had signiifcant effects on plant height and yield traits, indicating that both of the QTLs have pleiotropic effects.

Can Electricity Be New?

A new electrical power transmission system using a single wire only is described. One hundred and twenty years on the globe, two or three wires systems work. The new method does not use the ground to transmit energy. The wire may be in air, in land, or in water. One-wire method will reduce the cost of lines several times. The global changes like these will require to change the long-established of scientific and technical approaches. Even considering that the single-wire method has tremendous economic and technical advantages, changing concepts and consciousness is always a long and painful process. In article is shown all new blocs, necessary to go to one wire method. All methods and blocks were checked by simulations and system models developing.

One-Way Electricity

Water enters the fountains of Peterhof naturally through a system of locks, canals, reservoirs and springs from the Ropsha heights, and the height of the jets can vary depending on their filling. Pumps were never used in Peterhof. Tourists from all over the world come to see this fountain near famous palaces. The water delivery uses one tube pipe descending from the nearest hill. After the water comes down again in the lake, it flows out through the drain pipe. So even this very high fountain is working without any motor and comes back tube. And many fountains in the world are built according to this method. For hundreds of years of the existence of fountains, it never occurred to anyone to build a second pipe to return the water up the hill. So obviously, it is a one-way method.

Wideband One Way Antenna without Grounding

This article proposes a new type of antenna which allows getting rid of certain limitations of classic monopole antenna. Like a normal monopole, this antenna belongs to a class of radio antenna consisting of a straight rod-shaped conductor. But unlike a classic monopole, this antenna can operate at all frequencies of a very wide range. In addition, it does not require grounding. The article considers the wide possibilities of antenna applications.

Detection of QTLs for Important Agronomic Traits and Analysis of Their Stabilities Using SSSLs in Rice

Single segment substitution lines （SSSLs） each with a single chromosome segment from a donor under the same genetic background as the recipient were developed in rice by advanced backcrossing and molecular marker-assisted selection. Using the SSSLs, the QTLs for the important agronomic traits in rice would be detected under different environmental conditions. Detection of the QTLs controlling 22 important traits in rice was done with 32 SSSLs by the randomized block design in 2-4 cropping seasons. 59 QTLs were detected and distributed on chromosomes 1, 2, 3, 4, 6, 7, 8, 10, and 11, of which 18 QTLs were detected more than twice. Only 30.5% of the QTLs were detected repeatedly in different cropping seasons. Most of the QTLs of important agronomic traits were of little additive effects and instability. The QTLs controlling the traits, such as grain weight, grain length, ratio of grain length to width, and heading date were relatively stable. The stable QTLs usually had larger additive effects and were less affected by environment. The QTLs for the important agronomic traits were detected using the SSSLs in rice with high resolution under different environmental conditions. The instability of the QTLs may be the basis of the variation of rice plants during growth and development. It would be the genetic basis for improving yield and quality in rice cultivars by farming methods.

Dynamic Analysis for the Global Performance of An SPM-Feeder-Cage System Under Waves and Currents

In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.

Faulty Feeder Identification in Resonant Grounding Distribution Networks Based on Deep Learning and Transfer Learning

Identification of faulty feeders in resonant grounding distribution networks remains a significant challenge dueto the weak fault current and complicated working conditions.In this paper, we present a deep learning-based multi-labelclassification framework to reliably distinguish the faulty feeder.Three different neural networks (NNs) including the multilayerperceptron, one-dimensional convolutional neural network (1DCNN), and 2D CNN are built. However, the labeled data maybe difficult to obtain in the actual environment. We use thesimplified simulation model based on a full-scale test field (FSTF)to obtain sufficient labeled source data. Being different frommost learning-based methods, assuming that the distribution ofsource domain and target domain is identical, we propose asamples-based transfer learning method to improve the domainadaptation by using samples in the source domain with properweights. The TrAdaBoost algorithm is adopted to update theweights of each sample. The recorded data obtained in the FSTFare utilized to test the domain adaptability. According to ourvalidation and testing, the validation accuracies are high whenthere is sufficient labeled data for training the proposed NNs.The proposed 2D CNN has the best domain adaptability. TheTrAdaBoost algorithm can help the NNs to train an efficientclassifier that has better domain adaptation. It has been thereforeconcluded that the proposed method, especially the 2D CNN, issuitable for actual distribution networks.

Investigation of cost, power, and spectral efficiency in fixed- and flexi-grid networks

With the steady growth of traffic volume in core networks,it is predicted that future optical network communication will be constrained mainly by cost and power consumption.Thus,for Internet sustainability,it will be necessary to ensure cost and power efficiency in optical networks.The aims of this study are(i)to identify the main sources of cost and power consumption in fixed-grid(SLR and MLR)and flexi-grid(OFDM)optical networks,and(ii)to compare techniques for improving cost and power efficiency in SLR/MLR-and OFDM-based networks.To this end,we conducted a comparative analysis of cost and power efficiency for the OFDM-and MLR/SLR-based networks,and considering realistic networks,evaluated the cost and power consumed by different components in the optical layer.Our results show that(i)OFDM-based networks outperform those based on MLR/SLR in terms of both cost and power-efficiency,(ii)the extra equipment cost incurred due to under-utilization of spectrum is reduced by switching to a flexi-grid network,(iii)lower power consumption per bit is obtained when the networking solution ensures a finer bit-rate granularity,and(iv)there exists a power and spectrum minimization trade-off that is network characteristic dependent.