The shift of polarization orientation angle y at the maximum of co-polarized or cross-polarized back-scattering signature can be used to estimate the surface slopes. It has been utilized to generate the digital elevat...The shift of polarization orientation angle y at the maximum of co-polarized or cross-polarized back-scattering signature can be used to estimate the surface slopes. It has been utilized to generate the digital elevation mapping (DEM) and terrain topography using two-pass fully polarimetric SAR or interferometric SAR (INSAR) image data. This paper presents an approach to DEM inversion by using a single pass of polarimetric SAR data. The y shift is derived, by using the Mueller matrix solution, as a function of three Stokes parameters, Ivs, Ihs, Us, which are measured by the SAR polarimetry. Using the Euler angles transformation, the orientation angle y is related to both the range and azimuth angles of the tilted surface and radar viewing geometry, as has been discussed by many authors. When only a single-pass SAR data is available, the adaptive thresholding method and image morphological thinning algorithm for linear textures are proposed to first determine the azimuth angle. Then, making use of full multi-grid algorithm, both the range and azimuth angles are utilized to solve the Poisson equation of DEM to produce the terrain topography.展开更多
A comprehensive behavioral investigation of gain and noise figure （NF） at different erbium doped fiber amplifier （EDFA） configurations is proposed. Configurations such as single pass （SP）, single pass with filt...A comprehensive behavioral investigation of gain and noise figure （NF） at different erbium doped fiber amplifier （EDFA） configurations is proposed. Configurations such as single pass （SP）, single pass with filter （SPF）, double pass （DP） and double pass with filter （DPF） are designed, investigated and compared. A continuous increasing of gain value is recorded by changing the configuration from SP to SPF to DP then to DPF. The NF value shows different behaviors at different configurations.展开更多
We proposed a novel wavelength-spread compression technique for spectral beam combining of a diode laser array. A reflector, which is parallel to the grating, is introduced to achieve a double pass with a single grati...We proposed a novel wavelength-spread compression technique for spectral beam combining of a diode laser array. A reflector, which is parallel to the grating, is introduced to achieve a double pass with a single grating.This facilitated the reduction of the wavelength spread by half and doubled the number of combined elements in the gain range of the diode laser. We achieved a power of 26.1 W under continuous wave operation using a19 element single bar with a wavelength spread of 6.3 nm, which is nearly half of the original wavelength spread of 14.2 nm, demonstrating the double-compressed spectrum capability of this structure. The spectral beam combining efficiency was 63.7%. The grating efficiency and reflector reflectance were both over 95%; hence, the efficiency loss of the double-pass grating with a reflector is acceptable. In contrast to double-grating methods,the proposed method introduces a reflector that efficiently uses the single grating and shows significant potential for a more efficient spectral beam combining of diode laser arrays.展开更多
文摘The shift of polarization orientation angle y at the maximum of co-polarized or cross-polarized back-scattering signature can be used to estimate the surface slopes. It has been utilized to generate the digital elevation mapping (DEM) and terrain topography using two-pass fully polarimetric SAR or interferometric SAR (INSAR) image data. This paper presents an approach to DEM inversion by using a single pass of polarimetric SAR data. The y shift is derived, by using the Mueller matrix solution, as a function of three Stokes parameters, Ivs, Ihs, Us, which are measured by the SAR polarimetry. Using the Euler angles transformation, the orientation angle y is related to both the range and azimuth angles of the tilted surface and radar viewing geometry, as has been discussed by many authors. When only a single-pass SAR data is available, the adaptive thresholding method and image morphological thinning algorithm for linear textures are proposed to first determine the azimuth angle. Then, making use of full multi-grid algorithm, both the range and azimuth angles are utilized to solve the Poisson equation of DEM to produce the terrain topography.
基金MMU and KFUPM/HBCC for their support in providing the various facilities utilized in the presentation of this paper
文摘A comprehensive behavioral investigation of gain and noise figure （NF） at different erbium doped fiber amplifier （EDFA） configurations is proposed. Configurations such as single pass （SP）, single pass with filter （SPF）, double pass （DP） and double pass with filter （DPF） are designed, investigated and compared. A continuous increasing of gain value is recorded by changing the configuration from SP to SPF to DP then to DPF. The NF value shows different behaviors at different configurations.
基金the support of the Shanghai Science and Technology Committee(Nos.15JC1403500 and 16DZ2290102)the Chinese Academy of Sciences(No.QYZDJ-SSW-JSC014)
文摘We proposed a novel wavelength-spread compression technique for spectral beam combining of a diode laser array. A reflector, which is parallel to the grating, is introduced to achieve a double pass with a single grating.This facilitated the reduction of the wavelength spread by half and doubled the number of combined elements in the gain range of the diode laser. We achieved a power of 26.1 W under continuous wave operation using a19 element single bar with a wavelength spread of 6.3 nm, which is nearly half of the original wavelength spread of 14.2 nm, demonstrating the double-compressed spectrum capability of this structure. The spectral beam combining efficiency was 63.7%. The grating efficiency and reflector reflectance were both over 95%; hence, the efficiency loss of the double-pass grating with a reflector is acceptable. In contrast to double-grating methods,the proposed method introduces a reflector that efficiently uses the single grating and shows significant potential for a more efficient spectral beam combining of diode laser arrays.
