We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were use...We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.展开更多
Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direc...Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.展开更多
By friction heating single point incremental forming,truncated square pyramid parts with different draw angles of a magnesium alloy AZ31 B were formed at room temperature.Metallurgical,tensile and micro-hardness tests...By friction heating single point incremental forming,truncated square pyramid parts with different draw angles of a magnesium alloy AZ31 B were formed at room temperature.Metallurgical,tensile and micro-hardness tests were carried out to obtain the effects of wall angle on microstructure and mechanical properties. The results show that grain in side wall of the formed parts becomes refined significantly. Furthermore,with the increase of draw angle,grain size increases,but strength,hardness and plasticity decrease. In addition, surface roughness tests were performed on the formed surface to determine the influence of speed of forming tool. The results show that surface roughness has a little increase with the increase of tool rotational speed.展开更多
To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single p...To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single point multiple output intelligent data acquisition and transmission system. It made an in-depth elaboration of the data acquisition and transmission system from hardware design,software architecture and principle,main functions and technical parameters. Finally,it came up with four innovation points:(i) intelligent(automatic)matching a variety of communication protocols for environmental monitoring equipment,(ii) realizing multi-protocol and multi-target parallel data transmission,(iii) realizing remote dynamic input of control instructions through wired or wireless network,and(iv) supporting configuration(process) simulation of field equipment DCS operating conditions.展开更多
BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate...BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate the risk of progressing to proliferative diabetic retinopathy(PDR).AIM To compare the efficacy and safety of multi-spot vs single-spot scanning panretinal laser photocoagulation in NPDR patients.METHODS Forty-nine NPDR patients(86 eyes)treated between September 2020 and July 2022 were included.They were randomly allocated into single-spot(n=23,40 eyes)and multi-spot(n=26,46 eyes)groups.Treatment outcomes,including bestcorrected visual acuity(BCVA),central macular thickness(CMT),and mean threshold sensitivity,were assessed at predetermined intervals over 12 months.Adverse reactions were also recorded.RESULTS Energy levels did not significantly differ between groups(P>0.05),but the multi-spot group exhibited lower energy density(P<0.05).BCVA and CMT improvements were noted in the multi-spot group at one-month posttreatment(P<0.05).Adverse reaction incidence was similar between groups(P>0.05).CONCLUSION While energy intensity and safety were comparable between modalities,multi-spot scanning demonstrated lower energy density and showed superior short-term improvements in BCVA and CMT for NPDR patients,with reduced laser-induced damage.展开更多
This paper presents an update on single point incremental forming (SPIF) of sheet metal since 2005. It includes a description of the process with new information on the maximum forming angle, Фmax, for 5052-H32. An...This paper presents an update on single point incremental forming (SPIF) of sheet metal since 2005. It includes a description of the process with new information on the maximum forming angle, Фmax, for 5052-H32. An indepth example of the successful design and production of parts is given for industry. This includes discussion on production times and surface roughness with details that will help designers. A general design guide for users of SPIF is provided. It is based upon experience gained in the last decade. In general, materials show a trend of decreasing formability with increasing initial thickness. It is shown that for thicker sheet metal, it is recommended using large spherical tools (12.7 mm or larger), or a large fiat-ended tool. The fiat-ended tool provides the best combination of good formability and very low surface roughness. For aluminum, galvanized steel and stainless steel, it is recommended using a fiat-ended tool. Advances in multi-pass techniques and information on successful and useful numerical models which predict forming behaviour are included. Finally, there is a discussion on future work needed in SPIF.展开更多
We prove a fluctuating limit theorem of a sequence of super-stable processes overR with a single point catalyst.The weak convergence of the processes on the space of Schwartz distributions is established.The limiting ...We prove a fluctuating limit theorem of a sequence of super-stable processes overR with a single point catalyst.The weak convergence of the processes on the space of Schwartz distributions is established.The limiting process is an Ornstein–Uhlenbeck type process solving a Langevin type equation driven by a one-dimensional stable process.展开更多
Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM...Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM)strategy to suppress the ZSC.Five vectors are selected as basic voltage vectors in one switching period.The fundamental and harmonic planes and the zero-sequence plane are taken into consideration to synthesis the reference voltage vector.To suppress the ZSC,a non-zero zero-sequence voltage(ZSV)is generated to compensate the third harmonic back-EMF.Rather than triangular carrier modulation,the sawtooth carrier modulation strategy is used to generate asymmetric PWM signals.The modulation range is investigated to explore the variation of modulation range caused by considering the zero-sequence plane.With the proposed method,the ZSC can be considerably reduced.The simulated and experimental results are presented to validate the effectiveness of the proposed modulation strategy.展开更多
Single cell trapping in vitro by microfluidic device is an emerging approach for the study of the relationship between single cells and their dynamic biochemical microenvironments. In this paper, a hydrodynamic-based ...Single cell trapping in vitro by microfluidic device is an emerging approach for the study of the relationship between single cells and their dynamic biochemical microenvironments. In this paper, a hydrodynamic-based microfluidic device for single cell trapping is designed using a combination of stagnation point flow and physical barrier.The microfluidic device overcomes the weakness of the traditional ones, which have been only based upon either stagnation point flows or physical barriers, and can conveniently load dynamic biochemical signals to the trapped cell. In addition, it can connect with a programmable syringe pump and a microscope to constitute an integrated experimental system.It is experimentally verified that the microfluidic system can trap single cells in vitro even under flow disturbance and conveniently load biochemical signals to the trapped cell. The designed micro-device would provide a simple yet effective experimental platform for further study of the interactions between single cells and their microenvironments.展开更多
This paper mainly deals with the point groups and single forms of octagonal quasicrystals and the description of one-dimensional quasilattice. The authors present a new sequence for describing the arrangement of quasi...This paper mainly deals with the point groups and single forms of octagonal quasicrystals and the description of one-dimensional quasilattice. The authors present a new sequence for describing the arrangement of quasiperiods in one-dimensional quasilattice. The first ten numbers of quasiperiods of this sequence are 1, 1, 2, 5, 12, 29, 70, 169, 408 and 985. The arrangement of quasiperiods in the first five steps are a, b, ab. babab and babababbabab. Seven p(?)nt groups and nine single forms for the octagonal system have been deduced, They are as follows: Point groups: 8.8m, 82, 8/m, 8/mmm, 8 and 82m; single forms: octagonal prism, dioctagonal prism. octagonal pyramid. dioctagonal pyramid. octagonal dipyramid, dioctagonal dipyramid, octagonal scalenohedron, dioctagonal scalenohedron and octagonal trapezohedron. Besides seven point groups and nine single forms for the dodecahegonal system have also been deduced.展开更多
For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand....For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.展开更多
In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodyna...In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.展开更多
The internal turret mooring system for oil production storage vessels is a developing type ofoffshore floating production system suitable for deep water and harsh environmental application. In this paper, some achieve...The internal turret mooring system for oil production storage vessels is a developing type ofoffshore floating production system suitable for deep water and harsh environmental application. In this paper, some achievements in our research work are presented. The description includes: dynamic analysis of mooring system, research on performance of turret assembly, influence of vessel dimensions and hull forms on mooring performance, model tests under combined action of environmental forces in basin, and hull structural strength analysis.展开更多
Time series data is a kind of data accumulated over time,which can describe the change of phenomenon.This kind of data reflects the degree of change of a certain thing or phenomenon.The existing technologies such as L...Time series data is a kind of data accumulated over time,which can describe the change of phenomenon.This kind of data reflects the degree of change of a certain thing or phenomenon.The existing technologies such as LSTM and ARIMA are better than convolutional neural network in time series prediction,but they are not enough to mine the periodicity of data.In this article,we perform periodic analysis on two types of time series data,select time metrics with high periodic characteristics,and propose a multi-scale prediction model based on the attention mechanism for the periodic trend of the data.A loss calculation method for traffic time series characteristics is proposed as well.Multiple experiments have been conducted on actual data sets.The experiments show that the method proposed in this paper has better performance than commonly used traffic prediction methods(ARIMA,LSTM,etc.)and 3%-5%increase on MAPE.展开更多
Let W^-(t)(t∈R+^N) be the d-dimensional N-parameter generalized Brownian sheet. We study the polar sets for W^-(t). It is proved that for any α∈ R^d, P{W^-(t) = α, for some t∈ R〉^N} = {1, if βd 〈 2N ...Let W^-(t)(t∈R+^N) be the d-dimensional N-parameter generalized Brownian sheet. We study the polar sets for W^-(t). It is proved that for any α∈ R^d, P{W^-(t) = α, for some t∈ R〉^N} = {1, if βd 〈 2N ,0 if αd〉 2N and the probability that W^-(t) has k-multiple points is 1 or 0 according as whether 2kN〉d(k-1)β or 2kN 〈 d(k - 1)α. These results contain and extend the results of the Brownian sheet, where R〉^N = (0,+∞)U,R+^N = [0,+∞)^N,0〈 α ≤1and β〉1.展开更多
The present research has been made on the Disconnectable Riser Turret Mooring (DRTM) System which could be used in the oil fields of the South China Sea. The selection of the principal dimensions and their effect on t...The present research has been made on the Disconnectable Riser Turret Mooring (DRTM) System which could be used in the oil fields of the South China Sea. The selection of the principal dimensions and their effect on the characteristics of the system have been discussed. By means of a computer program, the synthetical appraisement has been made in the ultimate mooring condition, disconnecting condition and reconnecting condition respectively. Mean-while, a comparison has been made between DRTM system and CALM system. It has been indicated that DRTM is suitable for the South China Sea and has technological and economical preponderance.展开更多
As a critical Internet infrastructure,domain name system(DNS)protects the authenticity and integrity of domain resource records with the introduction of security extensions(DNSSEC).DNSSEC builds a single-center and hi...As a critical Internet infrastructure,domain name system(DNS)protects the authenticity and integrity of domain resource records with the introduction of security extensions(DNSSEC).DNSSEC builds a single-center and hierarchical resource authentication architecture,which brings management convenience but places the DNS at risk from a single point of failure.When the root key suffers a leak or misconfiguration,top level domain(TLD)authority cannot independently protect the authenticity of TLD data in the root zone.In this paper,we propose self-certificating root,a lightweight security enhancement mechanism of root zone compatible with DNS/DNSSEC protocol.By adding the TLD public key and signature of the glue records to the root zone,this mechanism enables the TLD authority to certify the self-submitted data in the root zone and protects the TLD authority from the risk of root key failure.This mechanism is implemented on an open-source software,namely,Berkeley Internet Name Domain(BIND),and evaluated in terms of performance,compatibility,and effectiveness.Evaluation results show that the proposed mechanism enables the resolver that only supports DNS/DNSSEC to authenticate the root zone TLD data effectively with minimal performance difference.展开更多
The structure and energy of He impurities and vacancy on (001) surface of bcc iron are investigated by an ab initio method. Three cases for stabilities of a He atom at the surface are found: some of He atoms at sur...The structure and energy of He impurities and vacancy on (001) surface of bcc iron are investigated by an ab initio method. Three cases for stabilities of a He atom at the surface are found: some of He atoms at surface atomic layers (SAL) relax into vacuum gap; some of surface He atoms at octahedral interstitial site relax into more stable tetrahedral interstitial site; some of surface He atoms still stay at tetrahedral interstitial site. The un-stability of the He atom at the surface system can be explained by deformation mechanism of charge densities and electronic densities of states. It is found that formation energy of the point defects from the topmost SAL to bulk-like atomic layer increase gradually, for example, the formation energies of a monovacancy at the first five topmost SALs are equal to 0.33, 1.56, 2.04, 2.02 and 2.11 eV, respectively. The magnetic moments of Fe atoms in the surface atomic layers are also calculated.展开更多
Calculating the absolute open flow potential timely and investigating production capacity so as to adjust working system of production wells is one of main means to effectively recovery gas reservoirs during intermedi...Calculating the absolute open flow potential timely and investigating production capacity so as to adjust working system of production wells is one of main means to effectively recovery gas reservoirs during intermediate and late development stage.In order to obtain the open flow potential of gas wells accurately,a new method which utilized a single steady point was proposed in this research,which was based on deliverability formula of a gas well in pseudo-steady state flow with pseudo-pressure form.The influence on factor B in binomial productivity equation caused by the changed permeability was taken into consideration.According to the stable production data,reservoir permeability K can be determined by iterative method firstly,and the coefficient A,B in binomial productivity equation can be calculated with the open flow potential subsequently.It illustrated clearly by a practical example that the new method was suitable for gas wells especially when the producing pressure drop is large.Additionally,the error between the open flow potential value and interpretation result from the multi-point test was small,which proved it to be more simple,economic and effective than the common one.展开更多
Identity-based threshold signature(IDTS)is a forceful primitive to protect identity and data privacy,in which parties can collaboratively sign a given message as a signer without reconstructing a signing key.Neverthel...Identity-based threshold signature(IDTS)is a forceful primitive to protect identity and data privacy,in which parties can collaboratively sign a given message as a signer without reconstructing a signing key.Nevertheless,most IDTS schemes rely on a trusted key generation center(KGC).Recently,some IDTS schemes can achieve escrow-free security against corrupted KGC,but all of them are vulnerable to denial-of-service attacks in the dishonest majority setting,where cheaters may force the protocol to abort without providing any feedback.In this work,we present a fully decentralized IDTS scheme to resist corrupted KGC and denialof-service attacks.To this end,we design threshold protocols to achieve distributed key generation,private key extraction,and signing generation which can withstand the collusion between KGCs and signers,and then we propose an identification mechanism that can detect the identity of cheaters during key generation,private key extraction and signing generation.Finally,we formally prove that the proposed scheme is threshold unforgeability against chosen message attacks.The experimental results show that the computation time of both key generation and signing generation is<1 s,and private key extraction is about 3 s,which is practical in the distributed environment.展开更多
文摘We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.
基金Sponsored by the National Science and Technology Special Program(Grant No.2011ZX04004-041)the National Natural Science Foundation of China(Grant No.90923023 and No.51275115)
文摘Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.
基金National Natural Science Foundation of China(No.51205217)
文摘By friction heating single point incremental forming,truncated square pyramid parts with different draw angles of a magnesium alloy AZ31 B were formed at room temperature.Metallurgical,tensile and micro-hardness tests were carried out to obtain the effects of wall angle on microstructure and mechanical properties. The results show that grain in side wall of the formed parts becomes refined significantly. Furthermore,with the increase of draw angle,grain size increases,but strength,hardness and plasticity decrease. In addition, surface roughness tests were performed on the formed surface to determine the influence of speed of forming tool. The results show that surface roughness has a little increase with the increase of tool rotational speed.
文摘To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single point multiple output intelligent data acquisition and transmission system. It made an in-depth elaboration of the data acquisition and transmission system from hardware design,software architecture and principle,main functions and technical parameters. Finally,it came up with four innovation points:(i) intelligent(automatic)matching a variety of communication protocols for environmental monitoring equipment,(ii) realizing multi-protocol and multi-target parallel data transmission,(iii) realizing remote dynamic input of control instructions through wired or wireless network,and(iv) supporting configuration(process) simulation of field equipment DCS operating conditions.
文摘BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate the risk of progressing to proliferative diabetic retinopathy(PDR).AIM To compare the efficacy and safety of multi-spot vs single-spot scanning panretinal laser photocoagulation in NPDR patients.METHODS Forty-nine NPDR patients(86 eyes)treated between September 2020 and July 2022 were included.They were randomly allocated into single-spot(n=23,40 eyes)and multi-spot(n=26,46 eyes)groups.Treatment outcomes,including bestcorrected visual acuity(BCVA),central macular thickness(CMT),and mean threshold sensitivity,were assessed at predetermined intervals over 12 months.Adverse reactions were also recorded.RESULTS Energy levels did not significantly differ between groups(P>0.05),but the multi-spot group exhibited lower energy density(P<0.05).BCVA and CMT improvements were noted in the multi-spot group at one-month posttreatment(P<0.05).Adverse reaction incidence was similar between groups(P>0.05).CONCLUSION While energy intensity and safety were comparable between modalities,multi-spot scanning demonstrated lower energy density and showed superior short-term improvements in BCVA and CMT for NPDR patients,with reduced laser-induced damage.
文摘This paper presents an update on single point incremental forming (SPIF) of sheet metal since 2005. It includes a description of the process with new information on the maximum forming angle, Фmax, for 5052-H32. An indepth example of the successful design and production of parts is given for industry. This includes discussion on production times and surface roughness with details that will help designers. A general design guide for users of SPIF is provided. It is based upon experience gained in the last decade. In general, materials show a trend of decreasing formability with increasing initial thickness. It is shown that for thicker sheet metal, it is recommended using large spherical tools (12.7 mm or larger), or a large fiat-ended tool. The fiat-ended tool provides the best combination of good formability and very low surface roughness. For aluminum, galvanized steel and stainless steel, it is recommended using a fiat-ended tool. Advances in multi-pass techniques and information on successful and useful numerical models which predict forming behaviour are included. Finally, there is a discussion on future work needed in SPIF.
基金Supported by National Natural Science Foundation of China(Grant No.11126052)
文摘We prove a fluctuating limit theorem of a sequence of super-stable processes overR with a single point catalyst.The weak convergence of the processes on the space of Schwartz distributions is established.The limiting process is an Ornstein–Uhlenbeck type process solving a Langevin type equation driven by a one-dimensional stable process.
基金supported in part by the National Natural Science Foundation of China under Grant 51977099。
文摘Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM)strategy to suppress the ZSC.Five vectors are selected as basic voltage vectors in one switching period.The fundamental and harmonic planes and the zero-sequence plane are taken into consideration to synthesis the reference voltage vector.To suppress the ZSC,a non-zero zero-sequence voltage(ZSV)is generated to compensate the third harmonic back-EMF.Rather than triangular carrier modulation,the sawtooth carrier modulation strategy is used to generate asymmetric PWM signals.The modulation range is investigated to explore the variation of modulation range caused by considering the zero-sequence plane.With the proposed method,the ZSC can be considerably reduced.The simulated and experimental results are presented to validate the effectiveness of the proposed modulation strategy.
基金supported by the National Natural Science Foundation of China (Grants 11172060 and 31370948)
文摘Single cell trapping in vitro by microfluidic device is an emerging approach for the study of the relationship between single cells and their dynamic biochemical microenvironments. In this paper, a hydrodynamic-based microfluidic device for single cell trapping is designed using a combination of stagnation point flow and physical barrier.The microfluidic device overcomes the weakness of the traditional ones, which have been only based upon either stagnation point flows or physical barriers, and can conveniently load dynamic biochemical signals to the trapped cell. In addition, it can connect with a programmable syringe pump and a microscope to constitute an integrated experimental system.It is experimentally verified that the microfluidic system can trap single cells in vitro even under flow disturbance and conveniently load biochemical signals to the trapped cell. The designed micro-device would provide a simple yet effective experimental platform for further study of the interactions between single cells and their microenvironments.
文摘This paper mainly deals with the point groups and single forms of octagonal quasicrystals and the description of one-dimensional quasilattice. The authors present a new sequence for describing the arrangement of quasiperiods in one-dimensional quasilattice. The first ten numbers of quasiperiods of this sequence are 1, 1, 2, 5, 12, 29, 70, 169, 408 and 985. The arrangement of quasiperiods in the first five steps are a, b, ab. babab and babababbabab. Seven p(?)nt groups and nine single forms for the octagonal system have been deduced, They are as follows: Point groups: 8.8m, 82, 8/m, 8/mmm, 8 and 82m; single forms: octagonal prism, dioctagonal prism. octagonal pyramid. dioctagonal pyramid. octagonal dipyramid, dioctagonal dipyramid, octagonal scalenohedron, dioctagonal scalenohedron and octagonal trapezohedron. Besides seven point groups and nine single forms for the dodecahegonal system have also been deduced.
基金funded by the project scheme of the Publication Writing-IPR Incentive Program(PPHKI)2022Directorate of Research and Community Service(DRPM)Institut Teknologi Sepuluh Nopember(ITS)Surabaya,Indonesia for the financial supports。
文摘For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.
基金Kampachi Farms LLC for their support to complete this work and for all the technical information provided to complete the numerical model
文摘In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.
基金Project supported by special scientific research foundation for doctoral subjects
文摘The internal turret mooring system for oil production storage vessels is a developing type ofoffshore floating production system suitable for deep water and harsh environmental application. In this paper, some achievements in our research work are presented. The description includes: dynamic analysis of mooring system, research on performance of turret assembly, influence of vessel dimensions and hull forms on mooring performance, model tests under combined action of environmental forces in basin, and hull structural strength analysis.
基金This work is supported by the National Natural Science Foundation of China(Grant No.61971057)MoE-CMCC Artifical Intelligence Project(No.MCM20190701).
文摘Time series data is a kind of data accumulated over time,which can describe the change of phenomenon.This kind of data reflects the degree of change of a certain thing or phenomenon.The existing technologies such as LSTM and ARIMA are better than convolutional neural network in time series prediction,but they are not enough to mine the periodicity of data.In this article,we perform periodic analysis on two types of time series data,select time metrics with high periodic characteristics,and propose a multi-scale prediction model based on the attention mechanism for the periodic trend of the data.A loss calculation method for traffic time series characteristics is proposed as well.Multiple experiments have been conducted on actual data sets.The experiments show that the method proposed in this paper has better performance than commonly used traffic prediction methods(ARIMA,LSTM,etc.)and 3%-5%increase on MAPE.
基金the National Natural Science Foundation of China (10471148)the Natural Science Foundation of Shaanxi Province (2005A08, 2006A14)
文摘Let W^-(t)(t∈R+^N) be the d-dimensional N-parameter generalized Brownian sheet. We study the polar sets for W^-(t). It is proved that for any α∈ R^d, P{W^-(t) = α, for some t∈ R〉^N} = {1, if βd 〈 2N ,0 if αd〉 2N and the probability that W^-(t) has k-multiple points is 1 or 0 according as whether 2kN〉d(k-1)β or 2kN 〈 d(k - 1)α. These results contain and extend the results of the Brownian sheet, where R〉^N = (0,+∞)U,R+^N = [0,+∞)^N,0〈 α ≤1and β〉1.
文摘The present research has been made on the Disconnectable Riser Turret Mooring (DRTM) System which could be used in the oil fields of the South China Sea. The selection of the principal dimensions and their effect on the characteristics of the system have been discussed. By means of a computer program, the synthetical appraisement has been made in the ultimate mooring condition, disconnecting condition and reconnecting condition respectively. Mean-while, a comparison has been made between DRTM system and CALM system. It has been indicated that DRTM is suitable for the South China Sea and has technological and economical preponderance.
基金This work is partially supported by the National Key Research and Development Program(2018YFB1800702).
文摘As a critical Internet infrastructure,domain name system(DNS)protects the authenticity and integrity of domain resource records with the introduction of security extensions(DNSSEC).DNSSEC builds a single-center and hierarchical resource authentication architecture,which brings management convenience but places the DNS at risk from a single point of failure.When the root key suffers a leak or misconfiguration,top level domain(TLD)authority cannot independently protect the authenticity of TLD data in the root zone.In this paper,we propose self-certificating root,a lightweight security enhancement mechanism of root zone compatible with DNS/DNSSEC protocol.By adding the TLD public key and signature of the glue records to the root zone,this mechanism enables the TLD authority to certify the self-submitted data in the root zone and protects the TLD authority from the risk of root key failure.This mechanism is implemented on an open-source software,namely,Berkeley Internet Name Domain(BIND),and evaluated in terms of performance,compatibility,and effectiveness.Evaluation results show that the proposed mechanism enables the resolver that only supports DNS/DNSSEC to authenticate the root zone TLD data effectively with minimal performance difference.
基金supported by National Basic Research Program of China (No.2007CB209803)the National Natural Science Foundation of China (No.51231002)the Applied Basic Research Program from Hebei Province
文摘The structure and energy of He impurities and vacancy on (001) surface of bcc iron are investigated by an ab initio method. Three cases for stabilities of a He atom at the surface are found: some of He atoms at surface atomic layers (SAL) relax into vacuum gap; some of surface He atoms at octahedral interstitial site relax into more stable tetrahedral interstitial site; some of surface He atoms still stay at tetrahedral interstitial site. The un-stability of the He atom at the surface system can be explained by deformation mechanism of charge densities and electronic densities of states. It is found that formation energy of the point defects from the topmost SAL to bulk-like atomic layer increase gradually, for example, the formation energies of a monovacancy at the first five topmost SALs are equal to 0.33, 1.56, 2.04, 2.02 and 2.11 eV, respectively. The magnetic moments of Fe atoms in the surface atomic layers are also calculated.
基金Fund project:National Basic Research Program of China(973 Program-2014CB239205).
文摘Calculating the absolute open flow potential timely and investigating production capacity so as to adjust working system of production wells is one of main means to effectively recovery gas reservoirs during intermediate and late development stage.In order to obtain the open flow potential of gas wells accurately,a new method which utilized a single steady point was proposed in this research,which was based on deliverability formula of a gas well in pseudo-steady state flow with pseudo-pressure form.The influence on factor B in binomial productivity equation caused by the changed permeability was taken into consideration.According to the stable production data,reservoir permeability K can be determined by iterative method firstly,and the coefficient A,B in binomial productivity equation can be calculated with the open flow potential subsequently.It illustrated clearly by a practical example that the new method was suitable for gas wells especially when the producing pressure drop is large.Additionally,the error between the open flow potential value and interpretation result from the multi-point test was small,which proved it to be more simple,economic and effective than the common one.
基金support by the National Key R&D Program of China(No.2021YFB3100400)the National Natural Science Foundation of China(Grant Nos.62172216,U20A201092)+6 种基金the Jiangsu Provincial Key Research and Development Program(Nos.BE2022068,BE2022068-2)the Key R&D Program of Guangdong Province(No.2020B0101090002)the Natural Science Foundation of Jiangsu Province(No.BK20211180)the Research Fund of Guangxi Key Laboratory of Trusted Software(No.KX202034)the Research Fund of State Key Laboratory of Integrated Services Networks(Xidian University)(No.ISN23-20)the Fund of Prospective Layout of Scientific Research for NUAA(Nanjing University of Aeronautics and Astronautics)JSPS Postdoctoral Fellowships(No.P21073).
文摘Identity-based threshold signature(IDTS)is a forceful primitive to protect identity and data privacy,in which parties can collaboratively sign a given message as a signer without reconstructing a signing key.Nevertheless,most IDTS schemes rely on a trusted key generation center(KGC).Recently,some IDTS schemes can achieve escrow-free security against corrupted KGC,but all of them are vulnerable to denial-of-service attacks in the dishonest majority setting,where cheaters may force the protocol to abort without providing any feedback.In this work,we present a fully decentralized IDTS scheme to resist corrupted KGC and denialof-service attacks.To this end,we design threshold protocols to achieve distributed key generation,private key extraction,and signing generation which can withstand the collusion between KGCs and signers,and then we propose an identification mechanism that can detect the identity of cheaters during key generation,private key extraction and signing generation.Finally,we formally prove that the proposed scheme is threshold unforgeability against chosen message attacks.The experimental results show that the computation time of both key generation and signing generation is<1 s,and private key extraction is about 3 s,which is practical in the distributed environment.