Hierarchical ZSM-11 microspheres with intercrystalline mesoporous properties and rod-like crystals intergrowth morphology have been synthesized using a spot of tetrabutylammonium as a single template.XRD,FTIR,SEM,TEM ...Hierarchical ZSM-11 microspheres with intercrystalline mesoporous properties and rod-like crystals intergrowth morphology have been synthesized using a spot of tetrabutylammonium as a single template.XRD,FTIR,SEM,TEM and N2 adsorption analysis revealed that each individual particle was composed of nanosized rod crystals inserting each other and the intercrystalline voids existing among rods gave a significant mesopore size distribution.Steam treatment result demonstrated the excellent hydrothermal stability of samples.Various crystallization modes including constant temperature crystallization (one-stage crystallization) and two-stage temperature-varying crystallization with different 1st stage durations were investigated.The results suggested that the crystallization modes were mainly responsible for the adjustable particle size and textural properties of samples while the small amount of tetrabutylammonium bromide was mainly used to direct the formation of both ZSM-11 framework and its intergrowth morphology.Furthermore,the performance of optimal ZSM-11 as an active component for the catalytic pyrolysis of heavy oil was also investigated.Compared with the commercial pyrolysis catalyst,the hierarchical ZSM-11 catalyst exhibited a high selectivity to desired products(LPG+gasoline+diesel),as well as a much lower dry gas and coke yield,plus a high selectivity and yield of light olefins(C=3 C=4)and very poor selectivity to benzene.Therefore,fully open micropore-mesopore connectivity would make such hierarchically porous ZSM-11 zeolites very attractive for applications in clean petrochemical catalysis field.展开更多
The mesoporous molecular sieve (MCM)-41 using ionic liquid as template has been prepared. The typical template of ionic liquid was [C16mim]X. In this article, the use of 1-alkyl-3-methylimidazolium ([Cnmim]Br, where n...The mesoporous molecular sieve (MCM)-41 using ionic liquid as template has been prepared. The typical template of ionic liquid was [C16mim]X. In this article, the use of 1-alkyl-3-methylimidazolium ([Cnmim]Br, where n=12,14,16,18,20) salts as templates in the synthesis of MCM-41 is reported. The results showed that the synthesized MCM-41 had uniform pore diameter, high surface area and stable framework. The largest surface area of MCM-41 was the one prepared with [C14mim]Br as template. When using [C18min]Br as template, the narrowest pore distribution sample was obtained and the effect of surface tension of template solution to MCM-41 was first discussed.展开更多
基金supported by the National Program on Key Basic Research Project(973 Program)(Grant No.2012CB215000)the financial support from Fundamental Research Funds for the Central Universities
文摘Hierarchical ZSM-11 microspheres with intercrystalline mesoporous properties and rod-like crystals intergrowth morphology have been synthesized using a spot of tetrabutylammonium as a single template.XRD,FTIR,SEM,TEM and N2 adsorption analysis revealed that each individual particle was composed of nanosized rod crystals inserting each other and the intercrystalline voids existing among rods gave a significant mesopore size distribution.Steam treatment result demonstrated the excellent hydrothermal stability of samples.Various crystallization modes including constant temperature crystallization (one-stage crystallization) and two-stage temperature-varying crystallization with different 1st stage durations were investigated.The results suggested that the crystallization modes were mainly responsible for the adjustable particle size and textural properties of samples while the small amount of tetrabutylammonium bromide was mainly used to direct the formation of both ZSM-11 framework and its intergrowth morphology.Furthermore,the performance of optimal ZSM-11 as an active component for the catalytic pyrolysis of heavy oil was also investigated.Compared with the commercial pyrolysis catalyst,the hierarchical ZSM-11 catalyst exhibited a high selectivity to desired products(LPG+gasoline+diesel),as well as a much lower dry gas and coke yield,plus a high selectivity and yield of light olefins(C=3 C=4)and very poor selectivity to benzene.Therefore,fully open micropore-mesopore connectivity would make such hierarchically porous ZSM-11 zeolites very attractive for applications in clean petrochemical catalysis field.
基金Supported by the Natural Science Foundation of Zhengzhou Province （064SJZJ23115） and the Key Laboratory of Catalysis and Materials Science of South-Central University for Nationalities Foundation.
文摘The mesoporous molecular sieve (MCM)-41 using ionic liquid as template has been prepared. The typical template of ionic liquid was [C16mim]X. In this article, the use of 1-alkyl-3-methylimidazolium ([Cnmim]Br, where n=12,14,16,18,20) salts as templates in the synthesis of MCM-41 is reported. The results showed that the synthesized MCM-41 had uniform pore diameter, high surface area and stable framework. The largest surface area of MCM-41 was the one prepared with [C14mim]Br as template. When using [C18min]Br as template, the narrowest pore distribution sample was obtained and the effect of surface tension of template solution to MCM-41 was first discussed.
