A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced....A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor (which needs to be smaller than 1) is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper (Comp.Mater.Sci.,2007,39(2):282-290).The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.'s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.展开更多
Outdoor power transformers are one of the most pervasive noise sources in power transmission and distribution systems.Accurate prediction of outdoor noise propagation plays a dominant role for the evaluation and contr...Outdoor power transformers are one of the most pervasive noise sources in power transmission and distribution systems.Accurate prediction of outdoor noise propagation plays a dominant role for the evaluation and control of noise relevant to the transformer stations.In this paper surface vibration tests are carried out on a scale model of a single-phase transformer tank wall at different excitation frequencies.The phase and amplitude of test data are found to be randomly distributed when the excitation frequency exceeds the seventh mode frequency,which allows the single-phase power transformer to be simplified as incoherent point sources.An outdoor-coherent model is subsequently developed and incorporated with the image source method to investigate noise propagation from single-phase power transformers,due to the occurrence of multiple reflections and diffractions in the propagation path of each point source.The proposed model is used to calculate the sound field of the power transformer group by exploiting the additional phase information.In comparison with the ISO9613 model and the boundary element method,it is found that the proposed coherent image source method leads to more accurate prediction results,and hence better performance for the prediction of the outdoor noise induced by single-phase power transformers.展开更多
Software reliability modeling and prediction are important issues during software development, especially when one has to reach a desired reliability prior to software release. Various techniques, both static and dyna...Software reliability modeling and prediction are important issues during software development, especially when one has to reach a desired reliability prior to software release. Various techniques, both static and dynamic, are used for reliability modeling and prediction in the context of software risk management. The single-phase Rayleigh model is a dynamic reliability model;however, it is not suitable for software release date prediction. We propose a new multi-phase truncated Rayleigh model and obtain parameter estimation using the nonlinear least squares method. The proposed model has been successfully tested in a large software company for several software projects. It is shown that the two-phase truncated Rayleigh model outperforms the traditional single-phase Rayleigh model in modeling weekly software defect arrival data. The model is useful for project management in planning release times and defect management.展开更多
A novel modified Rayleigh model was developed for compensating hysteresis problem of an atomic force microscope(AFM) scanner.In high driving fields,piezoelectric actuators that integrated a scanner have severe hystere...A novel modified Rayleigh model was developed for compensating hysteresis problem of an atomic force microscope(AFM) scanner.In high driving fields,piezoelectric actuators that integrated a scanner have severe hysteresis,which can cause serious displacement errors.Piezoelectric hysteresis is from various origins including movement of defects,grain boundary effects,and displacement of interfaces.Furthermore,because its characteristic is stochastic,it is almost impossible to predict the piezoelectric hysteresis analytically.Therefore,it was predicted phenomenologically,which means that the relationship between inputs and outputs is formulated.The typical phenomenological approach is the Rayleigh model.However,the model has the discrepancy with experiment result as the fields increase.To overcome the demerit of the Rayleigh model,a modified Rayleigh model was proposed.In the modified Rayleigh model,each coefficient should be defined differently according to the field direction due to the increase of the asymmetry in the high fields.By applying an inverse form of this modified Rayleigh model to an AFM scanner,it is proved that hysteresis can be compensated to a position error of less than 5%.This model has the merits of reducing complicated fitting procedures and saving computation time compared with the Preisach model.展开更多
Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( PO...Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( POD) is used to analyze the flow and temperature characteristics from POD energy spectrum and eigenmodes. The results show that the energy spectrum converges fast and the scale of vortex structures captured by eigenmodes becomes smaller as the eigenmode order increases. Meanwhile,a low-dimensional model( LDM) for RB convection is derived based on POD eigenmodes used as a basis of Galerkin project of Navier-Stokes-Boussinesq equations. LDM is built based on different number of eigenmodes and through the analysis of phase portraits,streamline and isothermal predicted by LDM,it is suggested that the error between LDM and DNS is still large.展开更多
In heterogeneous natural gas reservoirs, gas is generally present as small patch-like pockets embedded in the water-saturated host matrix. This type of heterogeneity, alsocalled "patchy saturation", causes significa...In heterogeneous natural gas reservoirs, gas is generally present as small patch-like pockets embedded in the water-saturated host matrix. This type of heterogeneity, alsocalled "patchy saturation", causes significant seismic velocity dispersion and attenuation. Toestablish the relation between seismic response and type of fluids, we designed a rock physicsmodel for carbonates. First, we performed CT scanning and analysis of the fluid distributionin the partially saturated rocks. Then, we predicted the quantitative relation between the waveresponse at different frequency ranges and the basic lithological properties and pore fluids.A rock physics template was constructed based on thin section analysis of pore structuresand seismic inversion. This approach was applied to the limestone gas reservoirs of the rightbank block of the Amu Darya River. Based on poststack wave impedance and prestack elasticparameter inversions, the seismic data were used to estimate rock porosity and gas saturation.The model results were in ~ood a^reement with the production regime of the wells.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos.10625210,50609020 and 10902070)the Leading Academic Discipline Project of Shanghai Municipal Education Commission (Grant No.J50501)
文摘A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor (which needs to be smaller than 1) is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper (Comp.Mater.Sci.,2007,39(2):282-290).The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.'s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.
基金This work is funded by the Anhui Natural Science Foundation Project of China(under Grant KJ2016A201)the National Natural Science Foundation of China(under Grant 11774378).
文摘Outdoor power transformers are one of the most pervasive noise sources in power transmission and distribution systems.Accurate prediction of outdoor noise propagation plays a dominant role for the evaluation and control of noise relevant to the transformer stations.In this paper surface vibration tests are carried out on a scale model of a single-phase transformer tank wall at different excitation frequencies.The phase and amplitude of test data are found to be randomly distributed when the excitation frequency exceeds the seventh mode frequency,which allows the single-phase power transformer to be simplified as incoherent point sources.An outdoor-coherent model is subsequently developed and incorporated with the image source method to investigate noise propagation from single-phase power transformers,due to the occurrence of multiple reflections and diffractions in the propagation path of each point source.The proposed model is used to calculate the sound field of the power transformer group by exploiting the additional phase information.In comparison with the ISO9613 model and the boundary element method,it is found that the proposed coherent image source method leads to more accurate prediction results,and hence better performance for the prediction of the outdoor noise induced by single-phase power transformers.
文摘Software reliability modeling and prediction are important issues during software development, especially when one has to reach a desired reliability prior to software release. Various techniques, both static and dynamic, are used for reliability modeling and prediction in the context of software risk management. The single-phase Rayleigh model is a dynamic reliability model;however, it is not suitable for software release date prediction. We propose a new multi-phase truncated Rayleigh model and obtain parameter estimation using the nonlinear least squares method. The proposed model has been successfully tested in a large software company for several software projects. It is shown that the two-phase truncated Rayleigh model outperforms the traditional single-phase Rayleigh model in modeling weekly software defect arrival data. The model is useful for project management in planning release times and defect management.
基金Project supported by the Second Stage of Brain Korea 21 ProjectProject supported by the Korea Science and Engineering Foundation (KOSEF) through the National Research Laboratory Program Funded by the Ministry of Science and TechnologyProject supported by Changwon National University,Korea
文摘A novel modified Rayleigh model was developed for compensating hysteresis problem of an atomic force microscope(AFM) scanner.In high driving fields,piezoelectric actuators that integrated a scanner have severe hysteresis,which can cause serious displacement errors.Piezoelectric hysteresis is from various origins including movement of defects,grain boundary effects,and displacement of interfaces.Furthermore,because its characteristic is stochastic,it is almost impossible to predict the piezoelectric hysteresis analytically.Therefore,it was predicted phenomenologically,which means that the relationship between inputs and outputs is formulated.The typical phenomenological approach is the Rayleigh model.However,the model has the discrepancy with experiment result as the fields increase.To overcome the demerit of the Rayleigh model,a modified Rayleigh model was proposed.In the modified Rayleigh model,each coefficient should be defined differently according to the field direction due to the increase of the asymmetry in the high fields.By applying an inverse form of this modified Rayleigh model to an AFM scanner,it is proved that hysteresis can be compensated to a position error of less than 5%.This model has the merits of reducing complicated fitting procedures and saving computation time compared with the Preisach model.
基金Sponsored by the National Natural Science Foundation of China(Grant o.51576051)
文摘Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( POD) is used to analyze the flow and temperature characteristics from POD energy spectrum and eigenmodes. The results show that the energy spectrum converges fast and the scale of vortex structures captured by eigenmodes becomes smaller as the eigenmode order increases. Meanwhile,a low-dimensional model( LDM) for RB convection is derived based on POD eigenmodes used as a basis of Galerkin project of Navier-Stokes-Boussinesq equations. LDM is built based on different number of eigenmodes and through the analysis of phase portraits,streamline and isothermal predicted by LDM,it is suggested that the error between LDM and DNS is still large.
基金sponsored by the NSFC(41104066)973 Program of China(No.2014CB239006)+1 种基金NSTMP of China(Nos.2011ZX05004-003 and 2011ZX05029-003)12th 5-Year Basic Research Program of CNPC(No.2011A-3601)
文摘In heterogeneous natural gas reservoirs, gas is generally present as small patch-like pockets embedded in the water-saturated host matrix. This type of heterogeneity, alsocalled "patchy saturation", causes significant seismic velocity dispersion and attenuation. Toestablish the relation between seismic response and type of fluids, we designed a rock physicsmodel for carbonates. First, we performed CT scanning and analysis of the fluid distributionin the partially saturated rocks. Then, we predicted the quantitative relation between the waveresponse at different frequency ranges and the basic lithological properties and pore fluids.A rock physics template was constructed based on thin section analysis of pore structuresand seismic inversion. This approach was applied to the limestone gas reservoirs of the rightbank block of the Amu Darya River. Based on poststack wave impedance and prestack elasticparameter inversions, the seismic data were used to estimate rock porosity and gas saturation.The model results were in ~ood a^reement with the production regime of the wells.