Enhanced mass transfer in three-dimensional single-atom nickel catalyst with open-pore structure for highly efficient CO_(2) electrolysis

Design of efficient catalysts for electrochemical reduction of carbon dioxide (CO_(2)) with high selectivity and activity is of great challenge, but significant for managing the global carbon balance. Herein, a series of three-dimensional (3D) single-atom metals anchored on graphene networks (3D SAM-G) with open-pore structure were successfully mass-produced via a facile in-situ calcination technique assisted by NaCl template. As-obtained 3D SANi-G electrode delivers excellent CO Faradaic efficiency (FE) of >96% in the potential range of −0.6 to −0.9 V versus reversible hydrogen electrode (RHE) and a high current density of 66.27 mA cm^(−2) at −1.0 V versus RHE, outperforming most of the previously reported catalysts tested in H-type cells. Simulations indicate that enhanced mass transport within the 3D open-pore structure effectively increases the catalytically active sites, which in turn leads to simultaneous enhancement on selectivity and activity of 3D SANi-G toward CO_(2) electroreduction. The cost-effective synthesis approach together with the microstructure design concept inspires new insights for the development of efficient electrocatalysts.

Carbon Nitride with Single-Atom Nickel as Co-Catalyst for Visible-Light Promoted C—O Coupling

Solar-driven cross-coupling reactions by dual nickel/photocatalysis under mild conditions have received considerable attention.However,the existing photo/nickel dual catalytic cross-coupling reactions require the addition of expensive photosensitizers and organic ligands,and the catalytic activity is inadequate.Herein,we report a nickel single-atom heterogeneous catalyst supported on mesoporous carbon nitride for photocatalytic C—O coupling reaction between 4-bromobenzonitrile and ethanol,affording 4-ethoxybenzonitrile in excellent yield compared to a semi-heterogeneous catalytic system.The catalytic system exhibits a broad substrate scope including ketones,aldehydes,esters,and amides.This work presents a simple and cost-effective strategy for anchoring metal single atoms onto carbon nitride,providing a new platform for enabling high-performance photocatalytic production of aryl ether compounds.

One dimensional nickel phosphide polymorphic heterostructure as carbon-free functional support loading single-atom iridium for promoted electrocatalytic water oxidation

Although conducting materials such as carbon nanotube and carbon fiber paper(CFP)have been extensively employed as support of electrocatalytic active sites,most of them are of poor catalytic functionality by themselves and undesirable stability during strong acid/alkaline environments or oxidation process.Here we report a novel one-dimensional(1D)nickel phosphide polymorphic heterostructure(denoted as NPPH)to work as one effective carbon-free functional support for loading of single-atom Ir water oxidation electrocatalyst.Specifically,the NPPH composed of both Ni12P5and Ni2P phases is not only active for robust alkaline water oxidation but also is of good stability and hydrophilicity for favorable loading of single-atom dispersed iridium.The NPPH supported single-atom Ir electrocatalyst(Ir/NPPH)is found to exhibit remarkably superior water oxidation activity with respect to the NPPH itself or CFP supported single-atom Ir catalyst(Ir/CFP),demonstrating the synergetic promotion effect between NPPH and single-atom Ir catalyst.Furthermore,the NPPH supported single-atom Ir catalyst can bear alkaline water oxidation for over 120 h at current density of 50 mA cm^(-2).The NPPH developed here is expected as functional support to composite with other water oxidation catalysts,as may be an alternative strategy of developing highly efficient carbon-free electrocatalysts.

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature Short-Time Annealing

Ultra fine-grained pure metals and their alloys have high strength and low ductility.In this study,cryorolling under different strains followed by low-temperature short-time annealing was used to fabricate pure nickel sheets combining high strength with good ductility.The results show that,for different cryorolling strains,the uniform elongation was greatly increased without sacrificing the strength after annealing.A yield strength of 607 MPa and a uniform elongation of 11.7%were obtained after annealing at a small cryorolling strain(ε=0.22),while annealing at a large cryorolling strain(ε=1.6)resulted in a yield strength of 990 MPa and a uniform elongation of 6.4%.X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),and electron backscattered diffraction(EBSD)were used to characterize the microstructure of the specimens and showed that the high strength could be attributed to strain hardening during cryorolling,with an additional contribution from grain refinement and the formation of dislocation walls.The high ductility could be attributed to annealing twins and micro-shear bands during stretching,which improved the strain hardening capacity.The results show that the synergistic effect of strength and ductility can be regulated through low-temperature short-time annealing with different cryorolling strains,which provides a new reference for the design of future thermo-mechanical processes.

Single-atom catalysts for the electrochemical reduction of carbon dioxide into hydrocarbons and oxygenates

The electrochemical reduction of carbon dioxide offers a sound and economically viable technology for the electrification and decarbonization of the chemical and fuel industries.In this technology,an electrocatalytic material and renewable energy-generated electricity drive the conversion of carbon dioxide into high-value chemicals and carbon-neutral fuels.Over the past few years,single-atom catalysts have been intensively studied as they could provide near-unity atom utilization and unique catalytic performance.Single-atom catalysts have become one of the state-of-the-art catalyst materials for the electrochemical reduction of carbon dioxide into carbon monoxide.However,it remains a challenge for single-atom catalysts to facilitate the efficient conversion of carbon dioxide into products beyond carbon monoxide.In this review,we summarize and present important findings and critical insights from studies on the electrochemical carbon dioxide reduction reaction into hydrocarbons and oxygenates using single-atom catalysts.It is hoped that this review gives a thorough recapitulation and analysis of the science behind the catalysis of carbon dioxide into more reduced products through singleatom catalysts so that it can be a guide for future research and development on catalysts with industry-ready performance for the electrochemical reduction of carbon dioxide into high-value chemicals and carbon-neutral fuels.

Insight into demand-driven preparation of single-atomic mediators for lithium–sulfur batteries

Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.

Electrokinetic-mechanism of water and furfural oxidation on pulsed laser-interlaced Cu_(2)O and CoO on nickel foam

The electrocatalytic oxidation of biomass-derived furfural(FF)feedstocks into 2-furoic acid(FA)holds immense industrial potential in optics,cosmetics,polymers,and food.Herein,we fabricated Co O/Ni O/nickel foam(NF)and Cu_(2)O/Ni O/NF electrodes via in situ pulsed laser irradiation in liquids(PLIL)for the bifunctional electrocatalysis of oxygen evolution reaction(OER)and furfural oxidation reaction(FOR),respectively.Simultaneous oxidation of NF surface to NiO and deposition of CoO and/or Cu_(2)O on NF during PLIL offer distinct advantages for enhancing both the OER and FOR.CoO/NiO/NF electrocatalyst provides a consistently low overpotential of~359 m V(OER)at 10 m A/cm^(2),achieving the maximum FA yield(~16.37 m M)with 61.5%selectivity,79.5%carbon balance,and a remarkable Faradaic efficiency of~90.1%during 2 h of FOR at 1.43 V(vs.reversible hydrogen electrode).Mechanistic pathway via in situ electrochemical-Raman spectroscopy on CoO/NiO/NF reveals the involvement of phase transition intermediates(NiOOH and CoOOH)as surface-active centers during electrochemical oxidation.The carbonyl carbon in FF is attacked by hydroxyl groups to form unstable hydrates that subsequently undergo further oxidation to yield FA products.This method holds promise for large-scale applications,enabling simultaneous production of renewable building materials and fuel.

Accurate estimation of Li/Ni mixing degree of lithium nickel oxide cathode materials

Li/Ni mixing negatively influences the discharge capacity of lithium nickel oxide and high-nickel ternary cathode materials.However,accurately measuring the Li/Ni mixing degree is difficult due to the preferred orientation of labbased XRD measurements using Bragg–Brentano geometry.Here,we find that employing spherical harmonics in Rietveld refinement to eliminate the preferred orientation can significantly decrease the measurement error of the Li/Ni mixing ratio.The Li/Ni mixing ratio obtained from Rietveld refinement with spherical harmonics shows a strong correlation with discharge capacity,which means the electrochemical capacity of lithium nickel oxide and high-nickel ternary cathode can be estimated by the Li/Ni mixing degree.Our findings provide a simple and accurate method to estimate the Li/Ni mixing degree,which is valuable to the structural analysis and screening of the synthesis conditions of lithium nickel oxide and high-nickel ternary cathode materials.

Engineering of Self-Supported Electrocatalysts on a Three-Dimensional Nickel Foam Platform for Efficient Water Electrolysis

Economical water electrolysis requires highly active non-noble electrocatalysts to overcome the sluggish kinetics of the two half-cell reactions,oxygen evolution reaction,and hydrogen evolution reaction.Although intensive efforts have been committed to achieve a hydrogen economy,the expensive noble metal-based catalysts remain under consideration.Therefore,the engineering of self-supported electrocatalysts prepared using a direct growth strategy on three-dimensional(3D)nickel foam(NF)as a conductive substrate has garnered significant interest.This is due to the large active surface area and 3D porous network offered by these electrocatalysts,which can enhance the synergistic eff ect between the catalyst and the substrate,as well as improve electrocatalytic performance.Hydrothermal-assisted growth,microwave heating,electrodeposition,and other physical methods(i.e.,chemical vapor deposition and plasma treatment)have been applied to NF to fabricate competitive electrocatalysts with low overpotential and high stability.In this review,recent advancements in the development of self-supported electrocatalysts on 3D NF are described.Finally,we provide future perspectives of self-supported electrode platforms in electrochemical water splitting.

Solubility of iron(Ⅲ) and nickel(Ⅱ) acetylacetonates in supercritical carbon dioxide

As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.

Indirect Electroanalysis of 3-Methyl-4-Nitrophenol in Water Using Carbon Fiber Microelectrode Modified with Nickel Tetrasulfonated Phthalocyanine Complex

Electrochemical detection of 3-methyl-4-nitrophenol (MNP) in direct phenol oxidation occurs at high potentials and generally leads to progressive passivation of the electrochemical sensor. This study describes the use of a carbon fiber microelectrode modified with a tetrasulfonated nickel phthalocyanine complex for the detection of MNP at a lower potential than that of direct phenol oxidation. The MNP voltammogram showed the presence of an anodic peak at -0.11 V vs SCE, corresponding to the oxidation of the hydroxylamine group generated after the reduction of the nitro group. The effect of buffer pH on the peak current and SWV parameters such as frequency, scan increment, and pulse amplitude were studied and optimized to have better electrochemical response of the proposed sensor. With these optimal parameters, the calibration curve shows that the peak current varied linearly as a function of MNP concentration, leading to a limit of detection (LoD) of 1.1 μg/L. These results show an appreciable sensitivity of the sensor for detecting the MNP at relatively low potentials, making it possible to avoid passivation phenomena.

Research Progress of Nickel Iron Bimetallic Series Electrocatalytic Materials

Hydrogen energy has become one of the recognized clean energy sources worldwide due to its advantages such as low cost,renewable energy,and green environmental protec-tion.Electrolytic water is currently one of the most promising solutions for providing hydrogen fuel.Nickel iron bimetallic electrocatalysts have abundant sources,low cost,clean and pollution-free properties,and strong catalytic performance,This article mainly reviews the development and research of bimetallic nickel iron oxides and nickel iron alloys in recent years,and explores their synthesis methods,properties,and stability in depth.

Single-atom electrocatalysts for lithium-sulfur chemistry:Design principle,mechanism,and outlook

Lithium-sulfur batteries(LSBs)have been regarded as one of the promising candidates for the next-generation“lithium-ion battery beyond”owing to their high energy density and due to the low cost of sulfur.However,the main obstacles encountered in the commercial implementation of LSBs are the notorious shuttle effect,retarded sulfur redox kinetics,and uncontrolled dendrite growth.Accordingly,single-atom catalysts(SACs),which have ultrahigh catalytic efficiency,tunable coordination configuration,and light weight,have shown huge potential in the field of LSBs to date.This review summarizes the recent research progress of SACs applied as multifunctional components in LSBs.The design principles and typical synthetic strategies of SACs toward effective Li–S chemistry as well as the working mechanism promoting sulfur conversion reactions,inhibiting the lithium polysulfide shuttle effect,and regulating Li+nucleation are comprehensively illustrated.Potential future directions in terms of research on SACs for the realization of commercially viable LSBs are also outlined.

Long-range electron synergy over Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst in enhancing charge separation for photocatalytic hydrogen production

The development of novel single-atom catalysts with optimal electron configuration and economical noble-metal cocatalyst for efficient photocatalytic hydrogen production is of great importance,but still challenging.Herein,we fabricate Pt and Co single-atom sites successively on polymeric carbon nitride(CN).In this Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst,the noble-metal active sites are maximized,and the single-atomic Co_(1)N_4sites are tuned to Co_(1)N_3sites by photogenerated electrons arising from the introduced single-atomic Pt_(1)N_4sites.Mechanism studies and density functional theory(DFT)calculations reveal that the 3d orbitals of Co_(1)N_3single sites are filled with unpaired d-electrons,which lead to the improved visible-light response,carrier separation and charge migration for CN photocatalysts.Thereafter,the protons adsorption and activation are promoted.Taking this advantage of long-range electron synergy in bimetallic single atomic sites,the photocatalytic hydrogen evolution activity over Pt_(1)-Co_(1)/CN achieves 915.8 mmol g^(-1)Pt h^(-1),which is 19.8 times higher than Co_(1)/CN and 3.5 times higher to Pt_(1)/CN.While this electron-synergistic effect is not so efficient for Pt nanoclusters.These results demonstrate the synergistic effect at electron-level and provide electron-level guidance for the design of efficient photocatalysts.

Progress and perspective of single-atom catalysts for membrane electrode assembly of fuel cells

A fuel cell is an energy conversion device that can continuously input fuel and oxidant into the device through an electrochemical reaction to release electrical energy.Although noble metals show good activity in fuel cell-related electrochemical reactions,their ever-increasing price considerably hinders their industrial application.Improvement of atom utilization efficiency is considered one of the most effective strategies to improve the mass activity of catalysts,and this allows for the use of fewer catalysts,saving greatly on the cost.Thus,single-atom catalysts(SACs)with an atom utilization efficiency of 100%have been widely developed,which show remarkable performance in fuel cells.In this review,we will describe recent progress on the development of SACs for membrane electrode assembly of fuel cell applications.First,we will introduce several effective routes for the synthesis of SACs.The reaction mechanism of the involved reactions will also be introduced as it is highly determinant of the final activity.Then,we will systematically summarize the application of Pt group metal(PGM)and nonprecious group metal(non-PGM)catalysts in membrane electrode assembly of fuel cells.This review will offer numerous experiences for developing potential industrialized fuel cell catalysts in the future.

In situ formed ultrafine metallic Ni from nickel(Ⅱ) acetylacetonate precursor to realize an exceptional hydrogen storage performance of MgH_(2)-Ni-EG nanocomposite

It has been well known that doping nano-scale catalysts can significantly improve both the kinetics and reversible hydrogen storage capacity of MgH_(2) . However, so far it is still a challenge to directly synthesize ultrafine catalysts(e.g., < 5 nm), mainly because of the complicated chemical reaction processes. Here, a facile one-step high-energy ball milling process is developed to in situ form ultrafine Ni nanoparticles from the nickel acetylacetonate precursor in the MgH_(2) matrix. With the combined action of ultrafine metallic Ni and expanded graphite(EG), the formed MgH_(2)-Ni-EG nanocomposite with the optimized doping amounts of Ni and EG can still release 7.03 wt.% H_(2) within 8.5 min at 300 ℃ after 10 cycles. At a temperature close to room temperature(50 ℃), it can also absorb 2.42 wt.% H_(2) within 1 h. It can be confirmed from the microstructural characterization analysis that the in situ formed ultrafine metallic Ni is transformed into Mg_(2)Ni/Mg_(2)NiH_4 in the subsequent hydrogen absorption and desorption cycles. It is calculated that the dehydrogenation activation energy of the MgH_(2)-Ni-EG nanocomposite is also reduced obviously in comparison with the pure MgH_(2) . Our work provides a methodology to significantly improve the hydrogen storage performance of MgH_(2) by combining the in situ formed and uniformly dispersed ultrafine metallic catalyst from the precursor and EG.

Nickel single atom overcoordinated active sites to accelerate the electrochemical reaction kinetics for Li-S cathode

Lithium-sulfur(Li-S)batteries with high theoretical energy density are promising advanced energy storage devices.However,shuttling of dissolute lithium polysulfide(LiPSs)and sluggish conversion kinetics impede their applications.Herein,single nickel(Ni)atoms on two-dimensional(2D)nitrogen(N)-doped carbon with Ni-N_(4)-O overcoordinated structure(SANi-N_(4)-O/NC)are prepared and firstly used as a sulfur host of Li-S batteries.Due to the efficient polysulfides traps and highly LiPSs conversion effect of SANi-N_(4)-O/NC,the electrochemical performance of Li-S batteries obviously improved.The batteries can well operate even under high sulfur loading(5.8 mg cm^(-2))and lean electrolyte(6.1μL mg^(-1))condition.Meanwhile,density functional theory(DFT)calculations demonstrate that Ni single atom’s active sites decrease the energy barriers of conversion reactions from Li_(2)S_(8)to Li2S due to the strong interaction between SANi-N_(4)-O/NC and LiPSs.Thus,the kinetic conversion of LiPSs was accelerated and the shuttle effect is suppressed on SANi-N_(4)-O/NC host.This study provides a new design strategy for a 2D structure with single-atom overcoordinated active sites to facilitate the fast kinetic conversion of LiPSs for Li-S cathode.

Defect engineering of high-loading single-atom catalysts for electrochemical carbon dioxide reduction

Electrochemical carbon dioxide reduction reaction(CO_(2)RR)provides an attractive approach to carbon capture and utilization for the production high-value-added products.However,CO_(2)RR still suffers from poor selectivity and low current density due to its sluggish kinetics and multitudinous reaction pathways.Single-atom catalysts(SACs)demonstrate outstanding activity,excellent selectivity,and remarkable atom utilization efficiency,which give impetus to the search for electrocatalytic processes aiming at high selectivity.There appears significant activity in the development of efficient SACs for CO_(2)RR,while the density of the atomic sites remains a considerable barrier to be overcome.To construct high-metal-loading SACs,aggregation must be prevented,and thus novel strategies are required.The key to creating high-density atomically dispersed sites is designing enough anchoring sites,normally defects,to stabilize the highly mobile separated metal atoms.In this review,we summarized the advances in developing high-loading SACs through defect engineering,with a focus on the synthesis strategies to achieve high atomic site loading.Finally,the future opportunities and challenges for CO_(2)RR in the area of high-loading single-atom electrocatalysts are also discussed.

Directing in-situ self-optimization of single-atom catalysts for improved oxygen evolution

The demand for clean and sustainable energy has encouraged the production of hydrogen from water electrolyzers.To overcome the obstacle to improving the efficiency of water electrolyzers,it is highly desired to fabricate active electrocatalysts for the sluggish oxygen evolution process.However,there is generally an intrinsic gap between the as-prepared and real electrocatalysts due to structure evolution under the oxidative reaction conditions.Here,we combine in-situ anionic leaching and atomic deposition to realize single-atom catalysts with self-optimized structures.The introduced F ions facilitate structural transformation from Co(OH)xF into CoOOH(F),which generates an amorphous edge surface to provide more anchoring sites for Ir single atoms.Meanwhile,the in-situ anionic leaching of F ions elevates the Co valence state of Ir_(1)/CoOOH(F)more significantly than the counterpart without F ions(Ir_(1)/CoOOH),leading to stronger adsorption of oxygenated intermediates.As revealed by electrochemical measurements,the increased Ir loading together with the favored adsorption of*OH intermediates improve the catalytic activity of Ir_(1)/CoOOH(F).Specifically,Ir_(1)/CoOOH(F)delivered a current density of 10 mA cm-2at an overpotential of 238 mV,being lower than 314 mV for Ir_(1)/CoOOH.The results demonstrated the facility of the in-situ optimization process to optimize catalyst structure for improved performance.

Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions

Cu-Ni-Al alloys at different concentrations were obtained using a high frequency induction melting unit, keeping a balance in the nominal compositions. Light alloys are important to be used in industrial applications. Aluminum additions result in a positive hardness increment of the ternary alloys in comparison with the binary Cu-Ni alloys. Generalized wear mechanisms of the alloys with low aluminum content are basically type abrasive, while samples with 5 and 10 at.% Al present an oxidative-adhesive wear mechanism. Wear results have indicated that aluminum addition affects positively the wear resistance, mainly in samples with high aluminum content product of the creation during the test of different oxides corresponding to the elements present in the alloys.