Gas-phase and particle-phase PCDD/F congener distributions in the flue gas from an iron ore sintering plant

The activated carbon injection-circulating fluidized bed（ACI-CFB）-bag filter coupling technique was studied in an iron ore sintering plant. For comparison, the removal efficiencies under the conditions without or with ACI technology were both evaluated. It was found that the polychlorinated dibenzo-p-dioxins and dibenzofuran（PCDD/F） removal efficiency for total international toxic equivalence quantity（I-TEQ） concentration was improved from 91.61% to 97.36% when ACI was employed, revealing that ACI was very conducive to further controlling the PCDD/F emissions. Detailed congener distributions of PCDD/Fs in the gas-phase and particle-phase of the Inlet and Outlet samples were determined. Additionally, the PCDD/F distribution for the Fly ash-with ACI sample of was also studied.

Leaching of the residue from the dry off-gas de-dusting and desulfurization process of an iron ore sinter plant

The residue from a second-stage dry sinter plant off-gas cleaning process contains both the fine dust from the sinter plant and the sorbent used. Recycling of the material that is usually handled by landfills to the sinter plant feed is not possible because of its chloride con- tent. Leaching of the chlorides allow the recycling of remaining solids. The saline leachate produced contains some heavy metals and must be treated before it is discharged into the sea. In laboratory experiments, leaching tests with the subsequent treatment of the leachate were con- ducted. After the process was optimized, all heavy-metal concentrations were below the permissible values. The optimum treatment condi- tions for heavy-metal precipitation were observed to be the filtration of the suspended solids followed by the dosing of liquid with lime milk （pH 10） and the subsequent precipitation using sodium sulfide.

Bulk Raw Materials Handling and Blending Techniques of Sinter Plant:A Case Study of Ajaokuta Steel Company Limited,Kogi State,Nigeria

Bulk raw materials handling plant and sintering plant preparatory plants are established to receive,blend,stockpile,prepare and supply specified grades of raw materials for smooth operations of iron making plant(Blast furnace),steel making plant(Basic oxygen converter)and lime Plant(calcinations plant).The study discusses bulk raw materials handling and some general problem of scientific analysis and documentation of basic equipment details,stockyard facilities,bulk materials transport systems and sinter processes,for the general knowledge and operational procedures of these plant for effective and efficient operational processes for optical results.Iron ore concentrate supplied from the mines to some extent fluctuate in their chemical composition as a result of the nature of the deposit with various factors controlling beneficiation processes and addition of metal-bearing materials collected as a waste product from the Rolling Mills,Blast Furnace and Sinter Plant which must be recycled through Iron ore concentrate stockyard.The part of the sinter mixture is melted at a temperature about 1300-1480°C and a sequence of reactions shaping the sinter cake to be loaded into the blast furnace to produce iron from a pig.

Life Cycle Assessment of Iron Ore Sintering Process

Iron ore sintering is an energy＇intensive process associated with emission of pollutants in iron and steel in- dustry. In order to comprehensively evaluate the environmental impacts of sintering, a detailed life cycle assessment of a sintering plant was conducted. Life cycle inventory showed that, in the production of 1 t sinter ore, 241.53 kg CO2 , 22.68 kg CO, 0. 294 kg SO2 , 0.63 kg NO, , 1.18 /lg dioxin and 0.48 kg dust were discharged. Global war- ming potentials, acidification potentials, photochemical ozone creation potentials and human toxicity potentials were selected as four impact categories, and the evaluation index for the sintering plant was calculated as 3.45 × 10 ^-12. Fi nally, based on the environmental impact analysis, several measures of reducing environmental [oadings of the sinte- ring plant were provided, which included the utilization of denitrification equipment, recirculation of the hot waste gas and process improvement to reduce fuel consumption.