Sizing and Simulation of a Hybrid Hydroelectricity and Photovoltaic System with Storage for Supplying the Tamagaly District in Mamou,Guinea

The present study is a contribution to the study of hybrid electric power conversion systems in rural areas.The approach adopted uses a methodology for analyzing the complementarity that exists between the two renewable energy potentials(solar and hydraulic)based on their daily,monthly and annual variations.The different analytical formulas for sizing a PV(photovoltaic)field and a small hydroelectric power station are recalled in this work.The HOMER software served as a tool for optimal sizing and simulation of the system.This work focuses on the analysis of the behavior and control of the performances of a hybrid system made up of two renewable energy sources,hydroelectricity/PV with a storage system and a converter.The main results obtained relate to:monitoring of the variation in temperature variation,solar irradiation of the site,as well as the flow of the watercourse.The profile of the village’s annual charges is known.The annual production of electrical energy is 527.936 kWh/year.The hydroelectric plant will provide 155.316 kWh/year,or 29%,and for the PV field(372.620 kWh/year),or 71%.The monthly energy average is 43.995 kWh/month.The average daily consumption is 731 kWh/d with a maximum power of 163 kW.The completion of this project makes it possible to cover all electrical loads in the Tamagaly district,with an annual energy production of 206.783 kWh.This would make it possible to locally limit greenhouse gas emissions in the area.

Evolution of Generalized Sizing for Evaluation of Converter Fed Machines

Based on the concept of the converter fed machines (CFMs), an optimal machine design can be considered as the best match of the machine topology, the power electronic converter and the performance specifications. To evaluate power production potentials of machines with various topologies with different waveforms of back emf and current, the generalized sizing equations and the power density equation are needed to evaluate the main dimensions and the power of such machines. In this paper. a general approach is presented to develop and to discuss these equations. Sample applications of the generalized sizing and power density equations are utilized to evaluate the induction machine and the double-salient permanent magnet (DSPM) machine.

Sizing of rock fragmentation modeling due to bench blasting using adaptive neuro-fuzzy inference system(ANFIS)

One of the most important characters of blasting,a basic step of surface mining,is rock fragmentation because it directly effects on the costs of drilling and economics of the subsequent operations of loading,hauling and crushing in mines.Adaptive neuro-fuzzy inference system(ANFIS)and radial basis function(RBF)show potentials for modeling the behavior of complex nonlinear processes such as those involved in fragmentation due to blasting of rocks.We developed ANFIS and RBF methods for modeling of sizing of rock fragmentation due to bench blasting by estimation of 80%passing size(K_(80))of Golgohar iron mine of Sirjan.Iran.Comparing the results of ANFIS and RBF models shows that although the statistical parameters RBF model is acceptable but ANFIS proposed model is superior and also simpler because ANFIS model is constructed using only two input parameters while seven input parameters used for construction of RBF model.

Effect of Sizing on the Interfacial Shear Strength of Carbon Fiber/Epoxy Resin Monofilament Composite

The single fiber fragmentation test （SFFT） was used to measure the interracial shear strength （IFSS） of sized and unsized CF800/epoxy resin monofilament composite in order to evaluate the effect of sizing respectively. Besides, the interfacial reinforcing mechanism was explored by analyzing the surface morphology of the carbon fibers, the wettability between the carbon fibers and the epoxy resin, and the chemical characteristics of the fiber surface. Moreover, the effect of sizing on heat and humidity resistance of interface was investigated by aging test. The results show that sizing improves IFSS of CF800/epoxy resin monofilament composite by 59% through increasing the functional groups containing oxygen and through enhancing wettability, while after sizing the heat and humidity resistance of interface is decreased.

SYNTHESIS AND SIZING PROPERTIES OF GRAFT STARCHES AS WARP SIZING MATERIALS FOR POLYESTER/COTTON BLEND SPUN YARN

Grafting a number of monomers such as acrylic acid, acrylamide, methyl acrylate, ethyl acrylate, butyl acrylate, methyl methacrylate, butyl methacrylate and vinyl acetate onto granular corn starch was carried out respectively in aqueous dispersion by using cerie ammonium nitrate as an initiator under nitrogen atmosphere. Conversion of monomer, grafting ratio and grafting efficiency were measured by the method of combining the chemical quantitative analysis with the weight. The adhesive power of the starch graft copolymers to polyester/cotton fiber was evaluated by measuring the breaking strength and elongation of the roving impregnated with the paste. The viscosity change of the size paste before and after grafting was studied. The mechanical properties of polyester/cotton fibre yarn sized by the graft starch were tested. The main conclusions are as follows: (1) monomers which were graft coplymerized onto starch have a significant influence upon the viscosity of the size paste; (2) the adhesive power

Global Geometric Analysis of Ship Rolling and Capsizing in Random Waves

The nonlinear biased ship rolling motion and capsizing in randoro waves are studied by utilizing a global geometric method. Thompson＇ s α-parameterized family of restoring functions is adopted in the vessel equation of motion for the representation of bias. To take into account the presence of randomness in the excitation and the response, a stochastic Melnikov method is developed and a mean-square criterion is obtained to provide an upper bound on the domain of the potential chaotic rolling motion. This criterion can be used to predict the qualitative nature of the invariant manifolds which represent the boundary botween safe and unsafe initial conditions, and how these depend on system parameters of the specific ship model. Phase space transport theory and lobe dynamics are used to demonstrate how motions starting from initial conditions inside the regions bounded by the intersected manifolds will evolve and how unexpected capsizing can occur.

CAPACITATED LOT SIZING AND SCHEDULING PROBLEMS USING HYBRID GA/TS APPROACHES

The capacitated lot sizing and scheduling problem that involves indetermining the production amounts and release dates for several items over a given planning horizonare given to meet dynamic order demand without incurring backloggings. The problem consideringovertime capacity is studied. The mathematical model is presented, and a genetic algorithm (GA)approach is developed to solve the problem. The initial solutions are generated after usingheuristic method. Capacity balancing procedure is employed to stipulate the feasibility of thesolutions. In addition, a technique based on Tabu search (TS) is inserted into the genetic algorithmdeal with the scheduled overtime and help the convergence of algorithm. Computational simulation isconducted to test the efficiency of the proposed hybrid approach, which turns out to improve boththe solution quality and execution speed.

Effect of Starch Dodecenylsuccinylation on the Adhesion and Film Properties of Dodecenylsuccinylated Starch for Polyester Warp Sizing

A series of dodecenylsuccinylated starches( DSSs) with different degree of substitution( DS) were prepared via the esterification of dodencenylsuccinic anhydride with hydrolyzed cornstarch in aqueous dispersion for investigating the influences of starch dodecenylsuccinylation upon the performances such as apparent viscosity and surface tension of starch paste, film behaviors,and adhesion to fibers for warp sizing. It was found that the dodecenylsuccinylation was able to reduce the surface tension of cooked starch paste and enhance the adhesion of starch to polyester fibers. It was also capable of depressing the brittleness of native starch and improving the mechanical behaviours such as breaking elongation and work-to-break of starch film. Initial increase in DS level of dodecenylsuccinylation enhanced these positive effects,while excessively increasing the level resulted in marked reduction in tensile strength of starch film and significant decrement in reaction efficiency. X-ray diffraction patterns of starch films showed the dodecenylsuccinates derivatized onto the backbones of starch depressed the degree of crystallinity of starch film. Based on the paste behaviors, adhesion, and film properties, the dodecenylsuccinylation level is recommended in a range of 0. 015-0. 025 for sizing polyester warps.

Collaborative supply chain planning under dynamic lot sizing costs with capacity decision

Studies show that supply chain cooperation improves supply chain performance. However, it remains a challenge to develop and implement the realistic supply chain cooperation scheme. We investigate a two-echelon supply chain planning problem with capacity acquisition decision under asymmetric cost and demand information. A simple negotiation-based coordination mechanism is developed to synchronize production/order strategies of a supplier and a buyer. The coordination scheme shows how the supplier and the buyer modify their production and order policy in order to find a joint economic lot sizing plan, which saves the overall supply chain cost. The allocation of the cooperation benefit is determined by negotiation. Due to the complexity of the multiple periods, multiple level supply chain lot sizing with capacity decision, a heuristic algorithm is developed to find coordination solutions. Finally, the results of the numerical study indicate the performance of supply chain coordination scheme.

The Numerical Simulation on Hollow Part's Precise Sizing Process With Cross-wedge Rolling

The hollow parts formed with cross-wedge rolling (CWR) have a wide application in many fields, such as architecture and automobile, etc. But the finished configuration of part’s cross section was always ellipse and it was hard to make it satisfied with traditional forming process. This paper proposed a FEM model of hollow workpiece of CWR in the sizing process, and simulated the deformation condition using the ANSYS program. Three kinds of parts with different wall thickness were calculated. Some stress and strain fields of the deformed hollow parts at various conditions are gained. The influence of wall thickness on the distribution of stress and strain was analyzed. The paper also found two phenomena, which never have been seen at traditional experiment, and author tried to give some explanations. The ANSYS program provided the relationship between the tolerance of the deformed workpiece and the deforming parameter. It is helpful to design the sizing dies of a new precise forming process of hollow parts on the CWR. The new process that designed through the information of FEM improved the accuracy of hollow parts on CWR. It proved the validity and practicability of numerical simulation.

FUNCTIONS OF POLYAMINES IN ROSIN SIZING UNDER NEUTRAL PAPERMAKING CONDITIONS

Functions of the polyamines in neutral rosin sizing were investigated using X-ray photoelectron spectroscopy (XPS) and laser diffraction particle analysis. The polyamine with a higher charge density and a smaller unite size could retain more rosin and cover larger fiber surfaces. The XPS spectra demonstrated that polyallylamine (PAAm) and polyvinylamine (PVAm) could react with a rosin size to form a -OC-N-CO- structure, but polydimethylamino ethyl methacrylate (PDMAEMA) could not. The formation of this structure may be a key step for effective sizing.

Jaya Learning-Based Optimization for Optimal Sizing of Stand-Alone Photovoltaic,Wind Turbine,and Battery Systems

Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.

Mechanism Analysis of Stiffness Improvement by Waterborne Epoxy Resin Surface Sizing Agent

Low-basis-weight paper lacks normal strength and stiffness. Waterborne epoxy resin could be employed with oxidized starch to improve paper stiffness through surface sizing. In this study,the mechanism of enhancing stiffness by adding waterborne epoxy resin was fully investigated. The results indicated that through surface sizing with epoxy resin,the paper thickness was preserved,whereas the elastic modulus increased significantly and the epoxy resin had positive impact on single fiber strength. A rigid resin layer and interpenetrating polymer network formed on the surface and in the inner layer of the paper,respectively. The formed resin layer and interpenetrating polymer network strongly supported the paper,leading to the improvement of the elastic modulus and stiffness. The stiffness improvement through surface sizing was mainly due to the formation of a fibrous composite layer and penetration of the sizing agent into the inner layers of the paper. The better the combination between fiber and sizing agent,the higher were the elastic modulus and the stiffness of the whole paper.

Sizing of Converters Interfacing the Rotor of Wind Driven DFIG to the Power Grid

In this paper, the operation of the Double Fed Induction Generator (DFIG) in the range from synchronous speed down to sub-synchronous speeds is analyzed using the power-flow approach. The objective of this analysis is to determine a ceiling for the rating of the converter interfacing the rotor of the wind driven double fed induction generator (DFIG) to the grid. Sizing the converter is an important issue in determining the economic viability of using the DFIM as a generator at synchronous and sub-synchronous speeds in wind energy conversion systems. The size of the converter is proved to be less than 10% of the rated power of the DFIG, which is 40% to 67% lower than that estimated in previous publications.

Starch-based Surface-sizing Agents in Paper Industry:An Overview

Natural starch is an abundant and inexpensive polysaccharide biopolymer that is widely used as a surface-sizing agent in the paper industry.The surface sizing of paper improves its water and abrasion resistance,as well as its physical strength and printing adaptability.However,natural starch presents some disadvantages,such as high viscosity,poor fluidity,poor filmforming properties,and easy coagulation.Therefore,starch is usually modified and blended with various components to achieve better sizing performance.This article reviews approaches for the surface sizing of paper and modification of starch using enzymes or chemical methods,such as oxidation,cationization,and graft copolymerization.This article also discusses the application of starch-based multiphase systems(obtained by blending starch with various components)as surface-sizing agents.

Effect of Fiber Sizing on Mechanical Properties of Carbon Reinforced Composites:A Review

Present study focuses on the carbon fiber sizing and their effect on overall mechanical properties of composites.Fiber sizing are one of the most important component in the manufacturing of composites.As the sizing are so much of importance in the manufacturing and development of composites which governs mechanical properties such as strength and stiffness.In this review some of the important articles are referred from the widely dispersed literature.This review covers the sizing effect,adhesion between fiber and matrix and characterization of composites.

Sizing and performance features of rotary and reciprocating positive displacement pumps

An overview of some popular rotary and reciprocating positive displacement( PD) pump types is given with the objective of presenting and comparing the respective sizing relationships and performance features. Reciprocating pumps discussed are the piston and plunger types. Rotary pumps addressed are gear( external and internal),vane,lobe,screw,and liquid ring pumps. To put the relative pump sizes in perspective,attention is fixed on the rotors or reciprocating elements of PD pumps,just as impellers indicate the sizes of rotodynamic pumps. The size of a PD pump is found from a dimensionless combination of displacement flow rate,rotative speed and diameter. The flow rate,head( or pressure rise) and power are related through the component efficiencies. The cavitation coefficient,often close to unity,connects the rotor tip speed or piston speed with the required NPSH,which can also be affected by the pressure rise of the pump due to leakage across the internal clearances. Operational effects due to cavitation,ingestion of gas or abrasives,and viscous and non-Newtonian fluids are discussed.

COMPARISON OF VARIOUS PARTICLE SIZING TECHNIQUES

SEM,TEM, gas absorption, X-ray Sedi-graph and laser particle sizing have been employed to analyse particle size distribution and powder agglomeration for Alcoa A16 and for Sumitomo AKS-53B and SKP-53 alpha - Al2O3 powders on several occasions as well. Comparison and evaluation of various particle-sizing techniques have been made.

THE EFFECT OF FRICTION AT SIZING SURFACE ON DRA WING FORCE

Regarding the sizing surface zone as a quasi-plasticity one and using yielding criterion,a new drawing force calculating formula in which the sizing surface friction was taken into account is deducted.The calculated and experimental results show that for rod drawing and tube sinking,it is permissible to neglect the effect of the friction at the sizing surface,but for tube drawing with a stationary mandrel,especially for thin-wall tube drawing this friction should not be neglected.