The ability of a blast furnace hearth liquid(iron and slag)passing through deadman characterizes the activity of the blast furnace hearth.To explore the influence of various factors on the static holdup rate of liquid...The ability of a blast furnace hearth liquid(iron and slag)passing through deadman characterizes the activity of the blast furnace hearth.To explore the influence of various factors on the static holdup rate of liquid in the process of passing through the deadman,a physical transport model of liquid passing through the deadman was firstly established.Then,a self-designed experimental device was used to simulate the process,and the influences of slag/iron ratios(250–450 kg/t)and unburned coal content(0%–9%)on the static holdup rate were studied.The experimental results indicate that with the slag/iron ratio increasing,the behavior of liquid passing through the coke packed bed gets much more difficult,and the static holdup rate increases.As the content of unburned pulverized coal(UPC)increases,the static holdup rate decreases first and then rises.This is caused by the dual effects of UPC.On the one hand,UPC can promote the carburizing reaction of unsaturated molten iron,thereby improving the fluidity of molten iron and reducing the static holdup rate.On the other hand,when the content of UPC rises to a certain level,it will be regarded as a kind of solid particle which will increase the liquid viscosity,causing an increase in the static holdup rate.Moreover,the liquid and coke will present interfacial chemical reactions when the liquid flows through the coke packed bed.And the Si-containing iron droplets at the slag–coke interface,generated by the reaction of SiO_(2)with C in the coke,can improve the interface wettability by reducing the interface wetting angle and increase the basicity of slag by consuming SiO_(2),thus improving the fluidity of the liquid and reducing the static holdup rate.展开更多
The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature...The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature were investigated in desulfurization experiments. The X-ray diffraction(XRD) and X-ray fluorescence(XRF) analyses show that the optimum conditions are LSS:ISS of 3:7 and temperature of 1350°C. The composition of desulfurization products is mainly Zn Fe2O4, and the desulfurization rate of 99.66% is obtained under optimum conditions. The thermogravimetric(TG) and differential scanning calorimeter(DSC) analyses demonstrate that reductant is necessary for decomposition and reduction of zinc ferrite in desulfurization product. The effects of reductant, temperature and feeding modes on iron enrichment were investigated in reduction experiments. The scanning electron microscope(SEM) and energy dispersive spectrometer(EDS) determination show that the iron content of reduction product is up to 99.36% under optimum conditions of coke as reductant, reduction temperature of 1450°C and the feeding mode of premixing.展开更多
A simple model for estimating the rate constant between CO2-CO gas and molten slag containing iron oxides was developed using optical basicity only. In this model, the temperature dependence of the rate constant can b...A simple model for estimating the rate constant between CO2-CO gas and molten slag containing iron oxides was developed using optical basicity only. In this model, the temperature dependence of the rate constant can be described by the Arrhenius law, and the activation energy can be expressed with a linear function of the slag's optical basicity. The model was applied to some molten slag systems, such as FeO, FeO-CaO, FeO-SiO2, FeO-Na2O, FeO-CaO-SiO2, FeO-SiO2-P2O5, FeO-SiOE-Na2O, and FeO-CaO-SiOE-P2O5. A comparison between the predicted results and measured data showed that the model worked well.展开更多
The molten slag in smelting reduction with iron bath has peculiar behaviour for its high FeO concentration. Slag foaming is effected by the concentration and reduction rate of FeO, basicity of slag and temperature. Ad...The molten slag in smelting reduction with iron bath has peculiar behaviour for its high FeO concentration. Slag foaming is effected by the concentration and reduction rate of FeO, basicity of slag and temperature. Addition of granulated coke can greatly decrease slag foaming extent in the process of smelting reduction with iron bath. The anti-foaming capacity of granulated coke is the best when the ratio of coke used for coke layer to total coke used in smelting reduction is controlled at about 20%.展开更多
The thermodynamic behavior of manganese and phosphorus between liquid iron and CaO-MgO-SiO2-Al2O3-FetO-MnO-P2O5 ladle slag system was addressed by investigating the thermodynamic equilibria between liquid iron contain...The thermodynamic behavior of manganese and phosphorus between liquid iron and CaO-MgO-SiO2-Al2O3-FetO-MnO-P2O5 ladle slag system was addressed by investigating the thermodynamic equilibria between liquid iron containing Mn and P and the ladle slag at 1873 K. The Mn distribution ratio L-Mn increases with increasing FetO content and decreasing the basicity ((%CaO + %MgO)/(%SiO2 + %Al2O3 + %P2O5)) in slag, while the P distribution ratio Lp seems to be increased as FetO content and the basicity increases. The values of L-Mn and L-p decrease by the addition of Al2O3 into slag. The expression of the dependence of L-Mn and L-p on the basicity and FetO content in slag was obtained.展开更多
The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is...The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is incidently oxidized when oxygen is blasted into bath to react with iron element. The distribution ratio of copper and tin between slag and metal is about 0.1. Phenomena of Cu and Sn elements segregation and accumulation in slag were observed by means of EPMA analysis. The distribution ratio of copper and tin between slag and metal may descend with increasing of CaO content in slag.展开更多
The feasibility of steel slag used as an iron fertilizer was studied in a pot experiment with corn. Slag alone or acidified slag was added to two Fe-deficient calcareous soils at different rates. Results showed that m...The feasibility of steel slag used as an iron fertilizer was studied in a pot experiment with corn. Slag alone or acidified slag was added to two Fe-deficient calcareous soils at different rates. Results showed that moderate rates (10 and 20 g kg-1) of slag or acidified slag substantially increased corn dry matter yield and Fe uptake. Application of steel slag increased the residual concentration of ammonium bicarbonate-diethylenetriamine pentaacetic acid (AB-DTPA) extractable Fe in the soils. The increase of extractable Fe was usually proportional to the application rate, and enhanced by the acidification of slag. Steel slag appeared to be a promising and inexpensive source of Fe to alleviate crop Fe chlorosis in Fe-deficient calcareous soils.展开更多
Effects of FeO content (0, 5%, 10%, and 15% in mass, respectively ) in lab-synthesized smelting redttc- tion slag with iron bath and test temperature (1 450, 1 500, 1550, anti 1 600 ℃ ) on corrosion am,amount and...Effects of FeO content (0, 5%, 10%, and 15% in mass, respectively ) in lab-synthesized smelting redttc- tion slag with iron bath and test temperature (1 450, 1 500, 1550, anti 1 600 ℃ ) on corrosion am,amount and microstructure of fused rebonded magnesia - chrome brick with 26.02 massqc of Cr2O3 were researched by rotary cylinder method. The results show that : ( 1 ) the corro- sion amolult of magnesia -chrome brick by slag without FeO is higher than that by the slag with 5% FeO, and the vorrosion amount increases when FeO content increa- ses from 5% to 15% ; (2) the test temperature is one of the important factors affecting the slag corrosion resist- ance of magnesia - chrome brick, and the corrosion of smelting reduction slag to brick increases with the temperature rising.展开更多
The rate of reducing Fet O in CaO-SiO2-Al2O3-Fet O slags with carbon saturated in molten iron has been determined in a graphite crucible in the temperature range of 1673-1773K. The effects of temperature, slag basicit...The rate of reducing Fet O in CaO-SiO2-Al2O3-Fet O slags with carbon saturated in molten iron has been determined in a graphite crucible in the temperature range of 1673-1773K. The effects of temperature, slag basicity and FetO content on the reduction rate have also been discussed. Test results show that the reduction rate increases with increasing temperature or FEtO concentration in slags, and the reduction rate has a parabolic relation with the simple basicity or optical basicity of slag, the maximum reduction rate being observed at around CaO/SiO2=1.5 of molten slags. The reduction reaction order is 1. 73 or 1.80, and the reduction activation energy is 299.9 or 295.9 kJ/mol in regard to Fet O weight content or Fet O activity calculated by using regular solution model, respectively. The reduction rate of CaO-SiO2-Al2 O3-Fet O slags with carbon saturated in molten iron is in the range of 0.32-3.48 mol-O/cm2·s.展开更多
基金the National Natural Science Foundation of China(51704019)the Young Elite Scientists Sponsorship Program by CAST(2018QNRC001).
文摘The ability of a blast furnace hearth liquid(iron and slag)passing through deadman characterizes the activity of the blast furnace hearth.To explore the influence of various factors on the static holdup rate of liquid in the process of passing through the deadman,a physical transport model of liquid passing through the deadman was firstly established.Then,a self-designed experimental device was used to simulate the process,and the influences of slag/iron ratios(250–450 kg/t)and unburned coal content(0%–9%)on the static holdup rate were studied.The experimental results indicate that with the slag/iron ratio increasing,the behavior of liquid passing through the coke packed bed gets much more difficult,and the static holdup rate increases.As the content of unburned pulverized coal(UPC)increases,the static holdup rate decreases first and then rises.This is caused by the dual effects of UPC.On the one hand,UPC can promote the carburizing reaction of unsaturated molten iron,thereby improving the fluidity of molten iron and reducing the static holdup rate.On the other hand,when the content of UPC rises to a certain level,it will be regarded as a kind of solid particle which will increase the liquid viscosity,causing an increase in the static holdup rate.Moreover,the liquid and coke will present interfacial chemical reactions when the liquid flows through the coke packed bed.And the Si-containing iron droplets at the slag–coke interface,generated by the reaction of SiO_(2)with C in the coke,can improve the interface wettability by reducing the interface wetting angle and increase the basicity of slag by consuming SiO_(2),thus improving the fluidity of the liquid and reducing the static holdup rate.
基金Project(2011AA061003)supported by the National High Technology Research and Development Program of China
文摘The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature were investigated in desulfurization experiments. The X-ray diffraction(XRD) and X-ray fluorescence(XRF) analyses show that the optimum conditions are LSS:ISS of 3:7 and temperature of 1350°C. The composition of desulfurization products is mainly Zn Fe2O4, and the desulfurization rate of 99.66% is obtained under optimum conditions. The thermogravimetric(TG) and differential scanning calorimeter(DSC) analyses demonstrate that reductant is necessary for decomposition and reduction of zinc ferrite in desulfurization product. The effects of reductant, temperature and feeding modes on iron enrichment were investigated in reduction experiments. The scanning electron microscope(SEM) and energy dispersive spectrometer(EDS) determination show that the iron content of reduction product is up to 99.36% under optimum conditions of coke as reductant, reduction temperature of 1450°C and the feeding mode of premixing.
基金supported by the National Natural Science Foundation of China (Nos. 50834007, 50874128, and 50674012)
文摘A simple model for estimating the rate constant between CO2-CO gas and molten slag containing iron oxides was developed using optical basicity only. In this model, the temperature dependence of the rate constant can be described by the Arrhenius law, and the activation energy can be expressed with a linear function of the slag's optical basicity. The model was applied to some molten slag systems, such as FeO, FeO-CaO, FeO-SiO2, FeO-Na2O, FeO-CaO-SiO2, FeO-SiO2-P2O5, FeO-SiOE-Na2O, and FeO-CaO-SiOE-P2O5. A comparison between the predicted results and measured data showed that the model worked well.
文摘The molten slag in smelting reduction with iron bath has peculiar behaviour for its high FeO concentration. Slag foaming is effected by the concentration and reduction rate of FeO, basicity of slag and temperature. Addition of granulated coke can greatly decrease slag foaming extent in the process of smelting reduction with iron bath. The anti-foaming capacity of granulated coke is the best when the ratio of coke used for coke layer to total coke used in smelting reduction is controlled at about 20%.
文摘The thermodynamic behavior of manganese and phosphorus between liquid iron and CaO-MgO-SiO2-Al2O3-FetO-MnO-P2O5 ladle slag system was addressed by investigating the thermodynamic equilibria between liquid iron containing Mn and P and the ladle slag at 1873 K. The Mn distribution ratio L-Mn increases with increasing FetO content and decreasing the basicity ((%CaO + %MgO)/(%SiO2 + %Al2O3 + %P2O5)) in slag, while the P distribution ratio Lp seems to be increased as FetO content and the basicity increases. The values of L-Mn and L-p decrease by the addition of Al2O3 into slag. The expression of the dependence of L-Mn and L-p on the basicity and FetO content in slag was obtained.
文摘The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is incidently oxidized when oxygen is blasted into bath to react with iron element. The distribution ratio of copper and tin between slag and metal is about 0.1. Phenomena of Cu and Sn elements segregation and accumulation in slag were observed by means of EPMA analysis. The distribution ratio of copper and tin between slag and metal may descend with increasing of CaO content in slag.
基金Project supported by the National Natural Science Foundation of China (No. 30270800).
文摘The feasibility of steel slag used as an iron fertilizer was studied in a pot experiment with corn. Slag alone or acidified slag was added to two Fe-deficient calcareous soils at different rates. Results showed that moderate rates (10 and 20 g kg-1) of slag or acidified slag substantially increased corn dry matter yield and Fe uptake. Application of steel slag increased the residual concentration of ammonium bicarbonate-diethylenetriamine pentaacetic acid (AB-DTPA) extractable Fe in the soils. The increase of extractable Fe was usually proportional to the application rate, and enhanced by the acidification of slag. Steel slag appeared to be a promising and inexpensive source of Fe to alleviate crop Fe chlorosis in Fe-deficient calcareous soils.
文摘Effects of FeO content (0, 5%, 10%, and 15% in mass, respectively ) in lab-synthesized smelting redttc- tion slag with iron bath and test temperature (1 450, 1 500, 1550, anti 1 600 ℃ ) on corrosion am,amount and microstructure of fused rebonded magnesia - chrome brick with 26.02 massqc of Cr2O3 were researched by rotary cylinder method. The results show that : ( 1 ) the corro- sion amolult of magnesia -chrome brick by slag without FeO is higher than that by the slag with 5% FeO, and the vorrosion amount increases when FeO content increa- ses from 5% to 15% ; (2) the test temperature is one of the important factors affecting the slag corrosion resist- ance of magnesia - chrome brick, and the corrosion of smelting reduction slag to brick increases with the temperature rising.
文摘The rate of reducing Fet O in CaO-SiO2-Al2O3-Fet O slags with carbon saturated in molten iron has been determined in a graphite crucible in the temperature range of 1673-1773K. The effects of temperature, slag basicity and FetO content on the reduction rate have also been discussed. Test results show that the reduction rate increases with increasing temperature or FEtO concentration in slags, and the reduction rate has a parabolic relation with the simple basicity or optical basicity of slag, the maximum reduction rate being observed at around CaO/SiO2=1.5 of molten slags. The reduction reaction order is 1. 73 or 1.80, and the reduction activation energy is 299.9 or 295.9 kJ/mol in regard to Fet O weight content or Fet O activity calculated by using regular solution model, respectively. The reduction rate of CaO-SiO2-Al2 O3-Fet O slags with carbon saturated in molten iron is in the range of 0.32-3.48 mol-O/cm2·s.
基金supported by the National Key R&D Program of China (No. 2019YFC1905703)Provincial Science and Technology Plan Projects in Guangdong Province, China (No. GDKJ2020002)。