The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce...The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce water resources on the site. These unfavorable factors have brought great difficulties to the on-site mining process. Now, a nano-composite green environmental protection slick water fracturing fluid system CQFR can be quickly dissolved because of the larger specific surface area, and the small molecular size makes the damage to the reservoir less than 5%, and the average drag reduction effect can reach more than 73%. It can quickly and well dissolve and maintain performance under high salinity conditions and fracturing flowback fluids. It responds well to the complex reservoir conditions on the construction site and makes the flowback fluid recyable, which greatly reduces the consumption of water resources on the construction site and effectively improves the construction efficiency and economic benefits.展开更多
The slick-water polymer adsorption damage and control measures in shale were examined using a shale pack model of the Ordovician Wufeng Formation–Silurian Longmaxi Formation in the Changning block of the Sichuan Basi...The slick-water polymer adsorption damage and control measures in shale were examined using a shale pack model of the Ordovician Wufeng Formation–Silurian Longmaxi Formation in the Changning block of the Sichuan Basin. The adsorption law of slick water under different displacement time, concentrations, p H values and temperatures of polymer were tested by traditional displacement experiment and UV-Vis spectrophotometer. The adsorption equilibrium time was 150 min, the amount of adsorption was proportional to the concentration of the polymer, and the maximum adsorption concentration was 1 800 mg/L. With the increase of p H value, the adsorption capacity decreased gradually, the adsorption capacity increased first and then decreased with the increase of temperature, and the adsorption capacity was the largest at 45 ?C. The adsorption patterns of polymers on shale were described by scanning electron microscopy and magnetic resonance imaging. It is proved that the adsorption of polymer on shale led to the destruction of the network structure of anionic polyacrylamide molecules, and the shale adsorption conformation was characterized qualitatively. Finally, according to the adsorption law and adsorption mechanism, it is proposed to reduce the adsorption quantity of polymer on shale surface by using hydrogen bond destruction agent. The effects of hydrogen bond destruction on four kinds of strong electronegative small molecules were compared, the hydrogen bond destroyer c was the best, which lowered the adsorption capacity by 5.49 mg/g and recovered permeability to 73.2%. The research results provide a reference for the optimization of construction parameters and the improvement of slickwater liquid system.展开更多
Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the...Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the concept of large-scale stimulation by fracture network,balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane(CBM)horizontal wells.This technique involves massive injection with high pumping rate+high-intensity proppant injection+perforation with equal apertures and limited flow+temporary plugging and diverting fractures+slick water with integrated variable viscosity+graded proppants with multiple sizes.The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block,eastern margin of the Ordos Basin.The injection flow rate is 18 m^(3)/min,proppant intensity is 2.1 m^(3)/m,and fracturing fluid intensity is 16.5 m^(3)/m.After fracturing,a complex fracture network was formed,with an average fracture length of 205 m.The stimulated reservoir volume was 1987×10^(4)m^(3),and the peak gas production rate reached 6.0×10^(4)m^(3)/d,which achieved efficient development of deep CBM.展开更多
This paper adopted an upstream FEM of 2-D unsteady flow to calculate the tidal flow in Zhoushan sea area. Based on the verification of the tidal current and environmental situation, the effects of the oily waste disch...This paper adopted an upstream FEM of 2-D unsteady flow to calculate the tidal flow in Zhoushan sea area. Based on the verification of the tidal current and environmental situation, the effects of the oily waste discharged from the oil berths on water quality have been calculated with a similar method. The isodilutions of oil pollutant are drawn from different sewage discharges. The moving loci of the slick centrepoint of oil spill have been calculated. The spreading area of the oil spill has also been forecasted. The results indicate that the set of models can predict the transport of oil spill in the sea area with reasonable accuracy.展开更多
文摘The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce water resources on the site. These unfavorable factors have brought great difficulties to the on-site mining process. Now, a nano-composite green environmental protection slick water fracturing fluid system CQFR can be quickly dissolved because of the larger specific surface area, and the small molecular size makes the damage to the reservoir less than 5%, and the average drag reduction effect can reach more than 73%. It can quickly and well dissolve and maintain performance under high salinity conditions and fracturing flowback fluids. It responds well to the complex reservoir conditions on the construction site and makes the flowback fluid recyable, which greatly reduces the consumption of water resources on the construction site and effectively improves the construction efficiency and economic benefits.
基金Supported by the China National Science and Technology Major Project(2016ZX05021,2016ZX05023)
文摘The slick-water polymer adsorption damage and control measures in shale were examined using a shale pack model of the Ordovician Wufeng Formation–Silurian Longmaxi Formation in the Changning block of the Sichuan Basin. The adsorption law of slick water under different displacement time, concentrations, p H values and temperatures of polymer were tested by traditional displacement experiment and UV-Vis spectrophotometer. The adsorption equilibrium time was 150 min, the amount of adsorption was proportional to the concentration of the polymer, and the maximum adsorption concentration was 1 800 mg/L. With the increase of p H value, the adsorption capacity decreased gradually, the adsorption capacity increased first and then decreased with the increase of temperature, and the adsorption capacity was the largest at 45 ?C. The adsorption patterns of polymers on shale were described by scanning electron microscopy and magnetic resonance imaging. It is proved that the adsorption of polymer on shale led to the destruction of the network structure of anionic polyacrylamide molecules, and the shale adsorption conformation was characterized qualitatively. Finally, according to the adsorption law and adsorption mechanism, it is proposed to reduce the adsorption quantity of polymer on shale surface by using hydrogen bond destruction agent. The effects of hydrogen bond destruction on four kinds of strong electronegative small molecules were compared, the hydrogen bond destroyer c was the best, which lowered the adsorption capacity by 5.49 mg/g and recovered permeability to 73.2%. The research results provide a reference for the optimization of construction parameters and the improvement of slickwater liquid system.
基金Supported by the National Natural Science Foundation of China Project(52274014)Comprehensive Scientific Research Project of China National Offshore Oil Corporation(KJZH-2023-2303)。
文摘Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the concept of large-scale stimulation by fracture network,balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane(CBM)horizontal wells.This technique involves massive injection with high pumping rate+high-intensity proppant injection+perforation with equal apertures and limited flow+temporary plugging and diverting fractures+slick water with integrated variable viscosity+graded proppants with multiple sizes.The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block,eastern margin of the Ordos Basin.The injection flow rate is 18 m^(3)/min,proppant intensity is 2.1 m^(3)/m,and fracturing fluid intensity is 16.5 m^(3)/m.After fracturing,a complex fracture network was formed,with an average fracture length of 205 m.The stimulated reservoir volume was 1987×10^(4)m^(3),and the peak gas production rate reached 6.0×10^(4)m^(3)/d,which achieved efficient development of deep CBM.
文摘This paper adopted an upstream FEM of 2-D unsteady flow to calculate the tidal flow in Zhoushan sea area. Based on the verification of the tidal current and environmental situation, the effects of the oily waste discharged from the oil berths on water quality have been calculated with a similar method. The isodilutions of oil pollutant are drawn from different sewage discharges. The moving loci of the slick centrepoint of oil spill have been calculated. The spreading area of the oil spill has also been forecasted. The results indicate that the set of models can predict the transport of oil spill in the sea area with reasonable accuracy.
