Spatiotemporal Characteristics of Atmospheric Brown Carbon Emis-sion from Combustion Sources in China

Atmospheric Brown Carbon(BrC)with strong wavelength-dependence light-absorption ability can significantly affect radiat-ive forcing.Highly resolved emission inventories with lower uncertainties are important premise and essential in scientifically evaluat-ing impacts of emissions on air quality,human health and climate change.This study developed a bottom-up inventory of primary BrC from combustion sources in China from 1960 to 2016 with a spatial resolution at 0.1°×0.1,based on compiled emission factors and detailed activity data.The primary BrC emission in China was about 593 Gg(500-735 Gg as interquartile range)in 2016,contributing to 7%(5%-8%)of a previously estimated global total BrC emission.Residential fuel combustion was the largest source of primary BrC in China,with the contribution of 67%as the national average but ranging from 25%to 99%among different provincial regions.Signi-ficant spatial disparities were also observed in the relative shares of different fuel types.Coal combustion contribution varied from 8%to 99%across different regions.Heilongjiang and North China Plain had high emissions of primary BrC.Generally,on the national scale,spatial distribution of BrC emission density per area was aligned with the population distribution.Primary BrC emission from combus-tion sources in China have been declined since a peak of~1300 Gg in 1980,but the temporal trends were distinct in different sectors.The high-resolution inventory developed here enables radiative forcing simulations in future atmospheric models so as to promote bet-ter understanding of carbonaceous aerosol impacts in the Earth's climate system and to develop strategies achieving co-benefits of hu-man health protection and climate change.

Hydrocarbon Generation Characteristics of Coal-measure Source Rocks and their Contribution to Natural Gas:A Case Study of Middle and Lower Jurassic Targets from the Southern Junggar Basin Margin

In order to study the hydrocarbon generation(HCGE)characteristics of coal-bearing basins,the coal-measure source rocks of the Middle Jurassic-Lower Jurassic(MLJ)of the piedmont thrust belt in the southern margin of the Junggar Basin in Northwest China are taken as research objects.More than 60 MLJ samples were collected from outcrops and wells.Total organic carbon(TOC),rock pyrolysis(Rock-Eval),organic petrological,vitrinite reflectance(%Ro),and hydrous pyrolysis were performed to analyze the relevant samples.The pyrolysis gases and liquid products were measured,and then the chemical composition,as well as carbon isotopes of the gases,were analyzed.The results indicate that the MLJ source rocks have the capacity for large-scale gas generation.In addition,for coal-measure source rocks,the heavier the carbon isotope of kerogen(δ^(13)C_(kerogen)),the lower the liquid hydrocarbon and hydrocarbon gas yield,and the easier it is to produce non-hydrocarbon gas.It is worth noting that when theδ^(13)C_(kerogen)in organic matter(OM)is relatively heavier,the fractionation of its products may become weaker in the evolutionary process.The vital contribution of the MLJ source rock to natural gas resources in the study area was further confirmed by comparing it with the Jurassic source gas.

Persistence of fertilization effects on soil organic carbon in degraded alpine wetlands in the Yellow River source region

In the restoration of degraded wetlands,fertilization can improve the vegetation-soil-microorganisms complex,thereby affecting the organic carbon content.However,it is currently unclear whether these effects are sustainable.This study employed Biolog-Eco surveys to investigate the changes in vegetation characteristics,soil physicochemical properties,and soil microbial functional diversity in degraded alpine wetlands of the source region of the Yellow River at 3 and 15 months after the application of nitrogen,phosphorus,and organic mixed fertilizer.The following results were obtained:The addition of nitrogen fertilizer and organic compost significantly affects the soil organic carbon content in degraded wetlands.Three months after fertilization,nitrogen addition increases soil organic carbon in both lightly and severely degraded wetlands,whereas after 15 months,organic compost enhanced the soil organic carbon level in severely degraded wetlands.Structural equation modeling indicates that fertilization decreases the soil pH and directly or indirectly influences the soil organic carbon levels through variations in the soil water content and the aboveground biomass of vegetation.Three months after fertilization,nitrogen fertilizer showed a direct positive effect on soil organic carbon.However,organic mixed fertilizer indirectly reduced soil organic carbon by increasing biomass and decreasing soil moisture.After 15 months,none of the fertilizers significantly affected the soil organic carbon level.In summary,it can be inferred that the addition of nitrogen fertilizer lacks sustainability in positively influencing the organic carbon content.

Sensitivity of Marine Controllable Source Electromagnetic Soundings for Identifying Plume Migration in Offshore CO_(2) Storage

Offshore carbon dioxide(CO_(2)) storage is an effective method for reducing greenhouse gas emissions. However, when using traditional seismic wave methods to monitor the migration of sequestration CO_(2) plumes, the characteristics of wave velocity changes tend to become insignificant beyond a certain limit. In contrast, the controllable source electromagnetic method(CSEM) remains highly sensitive to resistivity changes. By simulating different CO_(2) plume migration conditions, we established the relevant models and calculated the corresponding electric field response characteristic curves, allowing us to analyze the CSEM's ability to monitor CO_(2) plumes. We considered potential scenarios for the migration and diffusion of offshore CO_(2) storage, including various burial depths, vertical extension diffusion, lateral extension diffusion,multiple combinations of lateral intervals, and electric field components. We also obtained differences in resistivity inversion imaging obtained by CSEM to evaluate its feasibility in monitoring and to analyze all the electric field(Ex, Ey, and Ez) response characteristics. CSEM has great potential in monitoring CO_(2) plume migration in offshore saltwater reservoirs due to its high sensitivity and accuracy. Furthermore, changes in electromagnetic field response reflect the transport status of CO_(2) plumes, providing an important basis for monitoring and evaluating CO_(2)transport behavior during storage processes.

Influence of carbon sources on the performance of carbon-coated nano-silicon

Silicon-based material is an important anode material for next-generation lithium-ion batteries.In order to overcome its shortcomings,carbon coating is often employed to improve the electrochemical performance.However,the carbon source,carbon content,and different contact and mixing schemes between carbon sources and silicon are all complex factors and need to be clarified.In this study,nano-silicon is coated by the chemical vapor deposition method using different carbon sources,such as acetylene,methane,propane,and propylene.Carbon content after coating is designed to stay at the same level to reduce the experimental error.Results show the sample with higher conductivity provides higher cycle performance.Propylene is the best choice of the four carbon sources studied in this work.These results indicate that the selection of the carbon source is an important factor that plays a significant role in electrochemical performance.

Metabolic Characteristics and Functional Diversity of Carbon Source in Microflora of Ponds with Recirculating Aquaculture System

With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco-adjustments on microflo-ra in ponds. The results indicate that total number of bacterium, microbial metabolism activity, and diversity index in P7, P8, P1 and P2 kept higher, fol owed by P3, P4, P5 and P6. The utilization rate of microbes on sugars achieved the highest （31.0%-48.7%）, fol owed by carboxylic acid （13.4%-18.0%）, amino acid （10.1%-20.5%）, polymers （9.4%-17.0%）, biopolymer （5.7%-9.7%） and phenol （4.95%-7.50%）. Principal component analysis divided microflora in different ponds, suggesting that microbial community has varied carbon source characteristics and nitrogen-containing compound and biopolymer metabolisms are most affected.

Influences of Carbon Sources and Plant Growth Regulators on Anther Culture Efficiency of Pepper

[Objective]In order to increase anther culture efficiency of pepper.[Method]MS culture media and Bolajiaohong were used in this experiment to study the influences of carbon sources and concentrations on anther callus induction of pepper.Jiayu was taken as a material to study influences of plant growth regulators and concentrations on anther callus induction of pepper according to L16（4^5） orthogonal design.[Result]The average callus and embryoid induction rates of maltose at all concentrations were higher than these of sucrose but the difference was not significant.Taking maltose or sucrose as a carbon source,3% to 6% concentration was good for increasing induction frequencies of calli and embryoids.However,If the concentration was over 6%,the induction rates were declined dramatically with the increase of sugar concentration.The influences of growth regulators on induction rate of calli were listed as 2,4-D﹥ZT﹥NAA﹥KT﹥6-BA;the influences on induction rates of embryoids were listed as 2,4-D﹥NAA﹥ZT﹥KT﹥6-BA.The 2,4-D,ZT,NAA and KT had signficant or extremely significant influences on induction rates of calli and embryoids.2,4-D,ZT at 1.0 mg/L and NNA,KT at 0.5 mg/L had the best effects.The influences of ZT on calli and embryoids were better than those of KT and 6-BA.1.0 mg/L 2,4-D ＋1.0 mg/L ZT ＋0.5 mg/L KT ＋0.5 mg/L 6-BA was the best regulator combination for induction culture of Jiayu anther.[Conclusion]The experiment provided research basis for anther culture of pepper.

Effect of carbon source on the denitrification in constructed wetlands

The ability of constructed wetlands with different plants in nitrate removal were investigated. The factors promoting the rates of denitrification including organic carbon, nitrate load, plants in wetlands, pH and water temperature in field were systematically investigated. The results showed that the additional carbon source （glucose） can remarkably improve the nitrate removal ability of the constructed wetland. It demonstrated that the nitrate removal rate can increase from 20% to more than 50% in summer and from 10% to 30% in winter, when the nitrate concentration was 30-40 rag/L, the retention time was 24 h and 25 mg/L dissolved organic carbon （DOC） was ploughed into the constructed wetland. However, the nitrite in the constructed wetland accumulated a little with the supply of the additional carbon source in summer and winter, and it increased from 0.15 to 2 mg/L in the effluent. It was also found that the abilities of plant in adjusting pH and temperature can result in an increase of denitrification in wetlands. The seasonal change may also impact the denitrification.

Production and application of a novel bioflocculant by multiple-microorganism consortia using brewery wastewater as carbon source

The flocculating activity of a novel bioflocculant MMF1 produced by multiple-microorganism consortia MM1 was investigated. MM1 was composed of strain BAFRT4 identified as Staphylococcus sp. and strain CYGS1 identified as Pseudomonas sp. The flocculating activity of MMF1 isolated from the screening medium was 82.9%, which is remarkably higher than that of the bioflocculant produced by either of the strains under the same condition. Brewery wastewater was also used as the carbon source for MM1, and the cost-effective production medium for MM1 mainly comprised 1.0 L brewery water （chemical oxygen demand （COD） 5000 mg/L）, 0.5 g/L urea, 0.5 g/L yeast extract, and 0.2 g/L （NH4）2SO4. The optimal conditions for the production of MMF1 was inoculum size 2%, initial pH 6.0, cultivating temperature 30℃, and shaking speed 160 r/min, under which the flocculating activity of the MMF1 reached 96.8%. Fifteen grams of purified bioflocculant could be recovered from 1.0 L of fermentation broth. MMF1 was identified as a macromolecular substance containing both protein and polysaccharide. It showed good flocculating performance in treating indigotin printing and dyeing wastewater, and the maximal removal efficiencies of COD and chroma were 79.2% and 86.5%, respectively.

Organic Carbon in the Surface Sediments from the Intensive Mariculture Zone of Sanggou Bay: Distribution, Seasonal Variations and Sources

Mariculture has rapidly grown worldwide, which might greatly influence the biogeochemical cycle of organic carbon in coastal seas. In this study, several geochemical parameters, including grain size composition, sedimentary total organic carbon (TOC), total nitrogen (TN), stable carbon (δ13C) and nitrogen (δ15N) isotopic compositions, were analyzed for surface sediments collected from different mariculture zones of Sanggou Bay and in different seasons. We investigated the composition and distribution of or- ganic matter in surface sediments and further evaluated the contribution of mariculture activities to TOC sources. The TOC and TN contents (mass percentage) in the bay were in the range of 0.14% to 1.45% and 0.03% to 0.20%, respectively. The spatial distribution indicated that sedimentary TOC and TN contents in shellfish monoculture and shellfish-kelp polyculture zones were higher than in other mariculture zones, which might be related to grain size composition and mariculture organisms. Seasonal variations of TOC contents were observed in different mariculture zones. The TOC/TN atomic ratio (C/N),δ13C and δ15N were in the ranges of 5.97 to 10.97, 21.76‰ to 13.14‰ and 2.13‰ to 8.08‰, respectively, implying that sedimentary organic matter in Sanggou Bay was the mixture of marine phytoplankton, terrestrial and maricultural sources. A simple mixing model based on δ13C was applied and the results indicated that the relative contributions of organic carbon sources in Sanggou Bay followed the order kelp (36.6%) marine phytoplankton (28.7%) shellfish bio-deposition (23.8%) terrestrial input (10.9%). Surface sediments in Sanggou Bay were domi- nated by mariculture-derived organic carbon, which on average accounted for 60.4% of TOC.

Organic carbon source and burial during the past one hundred years in Jiaozhou Bay,North China

Organic carbon （OC）, total nitrogen （TN）, and ^210Pb in core sediment were measured to quantify the burial of organic carbon and the relative importance of allochthonous and autochthonous contributions during the past one hundred years in Jiaozhou Bay, North China. The core sediment was dated using ^210Pb chronology, which is the most promising method for estimation of sedimentation rate on a time scale of 100-150 years. The variation of the burial flux of organic carbon in the past one hundred years can be divided into the following three stages： （1） relatively steady before 1980s; （2） increasing rapidly from the 1980s to a peak in the 1990s, and （3） decreasing from the 1990s to the present. The change is consistent with the amount of solid waste and sewage emptied into the bay. The OC：TN ratio was used to evaluate the source of organic carbon in the Jiaozhou Bay sediment. In the inner bay and bay mouth, the organic carbon was the main contributor from terrestrial sources, whereas only about half of organic carbon was contributed from terrestrial source in the outer bay. In the inner bay, the terrestrial source of organic carbon showed a steady change with an increase in the range of 69%-77% before 1990 to 93% in 2000, and then decreased from 2000 because of the decrease in the terrestrial input. In the bay mouth, the percentage of organic carbon from land reached the highest value with 94% in 1994. In the outer bay, the sediment source maintained steady for the past one hundred years.

Secondary organic carbon quantification and source apportionment of PM_(10) in Kaifeng, China

During 2005, the filter samples of ambient PM10 from five sites and the source samples of particulate matter were collected in Kaifeng, Henan Province of China. Nineteen elements, water-soluble ions, total carbon （TC） and organic carbon （OC） contained in samples were analyzed. Seven contributive source types were identified and their contributions to ambient PM10 were estimated by chemical mass balance （CMB） receptor model. Weak associations between the concentrations of organic carbon and element carbon （EC） were observed during the sampling periods, indicating that there was secondary organic aerosol pollution in the urban atmosphere. An indirect method of ＂OC/EC minimum ratio＂ was applied to estimate the concentration of secondary organic carbon （SOC）. The results showed that SOC contributed 26.2%, 32.4% and 18.0% of TC in spring, summer-fall and winter, respectively, and the annual average SOC concentration was 7.07 μg/m^3, accounting for 5.73% of the total mass in ambient PM10. The carbon species concentrations in ambient PM10 were recalculated by subtracting SOC concentrations from measured concentrations of TC and OC to increase the compatibility of source and receptor measurements for CMB model.

Carbon and nitrogen isotopes analysis and sources of organic matter in surface sediments from the Sanggou Bay and its adjacent areas, China

Naturally existing stable carbon and nitrogen isotopes are important in the study of sedimentary organic matter sources. To identify the sources of sedimentary organic matter in Sanggou Bay and its adjacent areas, which is characterized by high-density shellfish and seaweed aquaculture, the grain size, organic carbon （OC）, total nitrogen （TN）, carbon and nitrogen isotopic composition （δ13C andδ15N） of organic matter in the surface sediment were determined. The results showed that, in August, sedimentary OC and TN ranged from 0.17% to 0.76% and 0.04% to 0.14%, respectively. In November, OC and TN ranged from 0.23% to 0.87% and 0.05% to 0.14%, respectively. There was a significant positive correlation between OC and TN （R=0.98, P＆lt;0.0001）, indicating that OC and TN were homologous. In August, theδ13C andδ15N of organic matter varied from -23.06‰ to -21.59‰ and 5.10‰ to 6.31‰, respectively. In November,δ13C andδ15N ranged from -22.87‰ to -21.34‰ and 5.13‰ to 7.31‰, respectively. This study found that the major sources of sedimentary organic matter were marine shellfish biodeposition, seaweed farming, and soil organic matter. Using a three-end-member mixed model, we estimated that the dominant source of sedimentary organic matter was shellfish biodeposition, with an average contribution rate of 65.53% in August and 43.00% in November. Thus, shellfish farming had a significant influence on the coastal carbon cycle.

A review of carbonates as hydrocarbon source rocks: basic geochemistry and oil–gas generation

Carbonates have been known to act as hydrocarbon source rocks, but their basic geochemical and associated hydrocarbon generation characteristics remain not well understood as they occur with argillaceous source rocks in most cases, and the hydrocarbon generation from each rock type is di cult to distinguish, forming one of puzzling issues within the field of petroleum geology and geochemistry. To improve the understanding of this critical issue, this paper reviews recent advances in this field and provides a summary of key areas that can be studied in future. Results show that carbonate source rocks are generally associated with high-salinity environments with low amounts of terrestrial inputs and low dissolved oxygen contents. Petrographically, these source rocks are dark gray or black, fine-grained, stratified, and contain bacterial and algal bioprecursors along with some other impurities. They generally have low organic matter contents, although these can vary significantly in di erent cases(e.g., the total organic carbon contents of marine and lacustrine carbonate source rocks in China are generally 0.1%–1.0% and 0.4%–4.0%, respectively). These rocks contain type I and type II kerogen, meaning there is a lack of vitrinites. This means that assessment of the maturity of the organic matter in these sediments needs to use non-traditional techniques rather than vitrinite reflectance. In terms of molecular geochemistry, carbonate source rocks have typical characteristics indicative of generally reducing and saline environments and lower organism-dominated bioprecursors of organic matter, e.g., high contents of sulfur compounds, low Pr/Ph ratios, and dominance of n-alkanes. Most of the carbonate source rocks are typically dominated by D-type organic facies in an oxidized shallow water mass, although high-quality source rocks generally contain A-and B-type organic facies in saline lacustrine and marine-reducing environments, respectively. The hydrocarbon generation model for the carbonate source rocks can involve early, middle, and late stages, with a diversity of hydrocarbons within these rocks, which can be aggregated, adsorbed, enclosed within minerals, or present as inclusions. This in turn implies that the large-scale hydrocarbon expulsion from these rocks is reliant on brittle deformation caused by external forces. Finally, a number of aspects of these source rocks remain unclear and need further study, including the e ectiveness of carbonates as hydrocarbon source rocks, bioprecursors, and hydrocarbon generation models of carbonate source rock, and the di erences between marine and lacustrine carbonate source rocks.

The Effects of Three Mineral Nitrogen Sources and Zinc on Maize and Wheat Straw Decomposition and Soil Organic Carbon

The incorporation of straw in cultivated ifelds can potentially improve soil quality and crop yield. However, the presence of recalcitrant carbon compounds in straw slow its decomposition rate. The objective of this study was to determine the effects of different nitrogen sources, with and without the application of zinc, on straw decomposition and soil quality. Soils were treated with three different nitrogen sources, with and without zinc： urea （CO（NH2）2）, ammonium sulfate （（NH4）2SO4）, and ammonium chloride （NH4Cl）. The combined treatments were as follows：maize （M） and wheat （W） straw incorporated into urea-, ammonium sulfate-, or ammonium chloride-treated soil （U, S, and C, respectively） with and without zinc （Z） （MU, MUZ, WU, WUZ;MS, MSZ, WS, WSZ;MC, MCZ, WC, WCZ, respectively）;straw with zinc only （MZ, WZ）;straw with untreated soil （MS, WS）;and soil-only or control conditions （NT）. The experiment consisted of 17 treatments with four replications. Each pot contained 150 g soil and 1.125 g straw, had a moisture content of 80%of the ifeld capacity, and was incubated for 53 days at 25°C. The rates of CO2-C emission, cumulative CO2-C evolution, total CO2 production in the soils of different treatments were measured to infer decomposition rates. The total organic carbon （TOC）, labile organic carbon （LOC）, and soil microbial biomass in the soils of different treatments were measured to infer soil quality. All results were signiifcantly different （P〈0.05） with the exception of the labile organic carbon （LOC）. The maize and wheat straw showed different patterns in CO2 evolution rates. For both straw types, Zn had a synergic effect with U, but an antagonistic effect with the other N sources as determined by the total CO2 produced. The MUZ treatment showed the highest decomposition rate and cumulative CO2 concentration （1 120.29 mg/pot）, whereas the WACZ treatment had the lowest cumulative CO2 concentration （1 040.57 mg/pot）. The addition of NH4Cl resulted in the highest total organic carbon （TOC） concentration （11.59 mg kg-1）. The incorporation of wheat straw resulted in higher microbial biomass accumulation in soils relative to that of the maize straw application. The results demonstrate that mineral N sources can affect the ability of microorganisms to decompose straw, as well as the soil carbon concentrations.

Analysis of phosphate-accumulating organisms cultivated under different carbon sources with polymerase chain reaction-denaturing gradient gel electrophoresis assay

To investigate the microbial communities of microorganisms cultivated under different carbon sources, three sequencing batch reactors were operated. They were supplied with sewage, glucose and sodium acetate as carbon sources respectively and showed high phosphorus removal performance. The results of denaturing gradient gel electrophoresis(DGGE) of polymerase chain reaction-amplified(PCR) 16S rDNA fragments demonstrated that β-protebacteria, Actinomyces sp. and γ-protebacteria only exited in 1# reactor. The microbiological diversity of 1# reactor exceeded the other two reactors. Flavobacterium, Bacillales, Actinomyces, Actinobacteridae and uncultured bacteria(AF527584, AF502204, AY592749, AB076862, AJ619051, AF495454 and AY133070) could be detected in the biological phosphorus removal reactors.

Effect of carbon source and nitrate concentration on denitrifying phosphorus removal by DPB sludge

Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrifying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.

Quick Evaluation of Present-Day Low-Total Organic Carbon Carbonate Source Rocks from Rock-Eval Data: Middle–Upper Ordovician in the Tabei Uplift, Tarim Basin

Previous studies have postulated the contribution of present-day low-total organic carbon （TOC） marine carbonate source rocks to oil accumulations in the Tabei Uplift, Tarim Basin, China. However, not all present-day low-TOC carbonates have generated and expelled hydrocarbons; therefore, to distinguish the source rocks that have already expelled sufficient hydrocarbons from those not expelled hydrocarbons, is crucial in source rock evaluation and resource assessment in the Tabei Uplift. Mass balance can be used to identify modern low-TOC carbonates resulting from hydrocarbon expulsion. However, the process is quite complicated, requiring many parameters and coefficients and thus also a massive data source. In this paper, we provide a quick and cost effective method for identifying carbonate source rock with present-day low TOC, using widely available Rock-Eval data. First, we identify present-day low-TOC carbonate source rocks in typical wells according to the mass balance approach. Second, we build an optimal model to evaluate source rocks from the analysis of the rocks＇ characteristics and their influencing factors, reported as positive or negative values of a dimensionless index of Rock-Eval data （IR）. Positive IR corresponds to those samples which have expelled hydrocarbons. The optimal model optimizes complicated calculations and simulation processes; thus it could be widely applicable and competitive in the evaluation of present-day low TOC carbonates. By applying the model to the Rock-Eval dataset of the Tabei Uplift, we identify present-day iow-TOC carbonate source rocks and primarily evaluate the contribution equivalent of 11.87×10^9 t oil.

Waste Activated Sludge Alkaline Fermentation Liquid as Carbon Source for Biological Nutrients Removal in Anaerobic Followed by Alternating Aerobic-Anoxic Sequencing Batch Reactors

Activated sludge process has been widely used to remove phosphorus and nitrogen from wastewater. However,the nitrogen and phosphorus removal is sometimes unsatisfactory due to the low influent COD.Another problem with the activated sludge process is that large amount of waste activated sludge is produced,which needs further treatment.In this study,the waste activated sludge alkaline fermentation liquid was used as the main carbon source for phosphorus and nitrogen removal under anaerobic followed by alternating aerobic-anoxic conditions,and the results were compared with those using acetic acid as the carbon source.The use of alkaline fermentation liquid not only affected the transformations of phosphorus,nitrogen,intracellular polyhydroxyalkanoates and glycogen, but also led to higher removal efficiencies for phosphorus and nitrogen compared with acetic acid.It was observed that ammonium was completely removed with either alkaline fermentation liquid or acetic acid as the carbon source. However,the former resulted in higher removal efficiencies for phosphorus(95%)and nitrogen(82%),while the latter showed lower ones(87%and 74%,respectively).The presence of a large amount of propionic acid in the alkaline fermentation liquid was one possible reason for its higher phosphorus removal efficiency.Exogenous instead of endogenous denitrification was the main pathway for nitrogen removal with the alkaline fermentation liquid as the carbon source,which was responsible for its higher nitrogen removal efficiency.It seems that the alkaline fermentation liquid can replace acetic acid as the carbon source for phosphorus and nitrogen removal in anaerobic fol- lowed by alternating aerobic-anoxic sequencing batch reactor.

Effect of carbon source on growth and lipid accumulation in Chlorella sorokiniana GXNN01

Heterotrophic culture of microalgae to develop methods of increasing biomass productivity and storage lipids has brought new insight to commercial biodiesel production. To understand the relationship between heterotrophy and lipid production, the effects of carbon sources on the growth and lipid accumulation of Chlorella sorokiniana GXNN01 was studied. The alga exhibited an increased growth rate in response to the addition of carbon sources, which reached the stationary phase after 48 h at 30℃. In addition, glucose and NaAc had a significant effect on the lipid accumulation during the early-stationary phase. Specifically, the lipid content was 0.237±0.026 g ·g^-1 cell dry weight and 0.272±0.041 g Ll when glucose was used as the carbon source, whereas the lipid content reached 0.287±0.018 g ·g^-1 cell dry weight and 0.2884-0.008 g Lz when NaAc was used as the carbon source. The neutral lipid content was found to first decrease and then increase over time during the growth phase. A glucose concentration of 20 mmol L^-1 gave the maximal lipid yield and the optimum harvest time was the early-stationary phase.