Taper barrel rheomoulding process for semi-solid slurry preparation and microstructure evolution of A356 aluminum alloy

The self-developed taper barrel rheomoulding (TBR) machine for light alloy semi-solid slurry preparation was introduced.The semi-solid slurry was obtained from the intense shearing turbulence of the alloy melt in the cause of solidification, which was further caused by the relative rotation of the internal and external taper barrel whose surface contained wale and groove.The heat transmission model of TBR process, the flow rules and the shearing model of the alloy melt were deduced.Taking A365 as experimental material, the microstructure evolution rules under different slurry preparation processes were analyzed.The results show that decreasing the pouring temperature of A365 alloy melt properly or increasing the shearing rate helps to obtain ideal semi-solid microstructure with the primary particle size of about 70 μm and the shape factor of above 0.8.

Preparation and Microstructure of a Si-Mo Fused Slurry Coating on Carbon/Carbon Composites for Oxidation Protection

A coating of composition Si-40Mo (wt pct) was prepared by fused slurry coating method on the two-dimensional carbon/carbon (2D-C/C) composite to improve oxidation resistance. In the procedure of the fabrication, pure St slurry inner layer in the pre-coating was necessary to apply because of infiltration of liquid Si into the substrate during the sintering. The coating consists of Si continuous phase and MoSi2 particles. In addition, the infiltration of Si into the substrate and the SiC reaction layer between the coating and the C/C composite were observed. Oxidation behavior of coated and uncoated C/C composites was studied in cyclic mode. The oxidation resistance and the thermal shock resistance of the Si-Mo fused slurry coating were quite excellent at 1370℃.

Semi-solid processing of aluminum and magnesium alloys:Status,opportunity,and challenge in China

Owing to its low cost,short process and low energy consumption,semi-solid processing(SSP)of aluminum(Al)and magnesium(Mg)alloys has been considered as a competitive approach to fabricate complicated components with excellent performance.Over the past decade,significant progress has been achieved in deeply understanding the SSP process,the microstructure and performance of the fabricated components in China.This paper starts with a retrospective overview of some common slurry preparation methods,followed by presenting the performance and the underlying mechanisms of SSP fabricated alloys.Then,the mainstream opinions on the microstructure evolution and rheological flow behavior of semi-solid slurry are discussed.Subsequently,the general situation and some recent examples of industrial applications of SSP are presented.Finally,special attention is paid to the unresolved issues and the future directions in SSP of Al and Mg alloys in China.

Research Status of Preparation Technique of Aluminum Alloy Semi-solid Slurry

Semi-solid processing(SSP)technique is an important method for metal casting.Products made by SSP technique have advantages such as small solidification shrinkage,high dimensional accuracy of castings,fast forming speed,high productivity,and good mechanical properties.Aluminum alloy products produced by SSP technique can be heat-treated.The mechanical properties of the products after heat treatment are similar to those of steel,but they have the lighter mass and are widely used in many fields.Semisolid slurry preparation technique is one of the key techniques in the field of aluminum alloy semi-solid forming,which determines the industrial application of semi-solid forming and also has significant impact on the quality of aluminum alloy semi-solid slurry.Semi-solid slurry preparation technique with the continuous development has become the emerging technique in the field of metal processing.The principles,advantages and disadvantages of various semi-solid slurry preparation techniques for metal materials were reviewed,and the future trends of semi-solid slurry preparation techniques were predicted.