Synthesis of ZSM-22/SAPO-11 composite molecular sieve-based catalysts with small crystallites and superior n-alkane hydroisomerization performance

To improve oil quality,ZSM-22/SAPO-11 composite molecular sieves were synthesized by adding ZSM-22 into a synthetic gel of SAPO-11 for n-decane hydroisomerization.The mass ratios of ZSM-22/(ZSM-22+SAPO-11)in the composite molecular sieves were optimized and the optimal ZSM-22/SAPO-11 composite(ZS-9)was obtained.The electrostatic repulsions between the ZSM-22 precursors and the SAPO-11 crystalline nuclei produced small ZSM-22 and SAPO-11 crystallites in ZS-9,which increased the specific surface area and mesopore volume and thereby exposed more acid sites.In comparison with conventional SAPO-11,ZSM-22 and their mechanical mixture,ZS-9 with smaller crystallites and the optimal medium and strong Brønsted acid centers(MSBAC)content displayed a higher yield of branched C_(10) isomers(81.6%),lower cracking selectivity(11.9%)and excellent stability.The correlation between the i-C_(10) selectivity and the MSBAC density of molecular sieves indicated that the selectivity for branched C_(10) isomers first increased and then decreased with increasing MSBAC density on the molecular sieves,and the maximum selectivity(87.7%)occurred with a density of 9.6×10^(−2)μmol m^(−2).

Numerical investigation on the flow and power of small-sized multi-bladed straight Darrieus wind turbine

Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.

Surfactant-aided hydrothermal preparation of La(2-x)Sr_xCuO_4 single crystallites and their catalytic performance on methane combustion

Perovskite-like oxide La2-xSrxCuO4 （x = 0, 1） single crystallites with microrod-like morphologies and tetragonal crystal structures were prepared hydrothermally at 240 ℃ with poly（ethylene glycol） （PEG） or hexadecyltrimethyl ammonium bromide （CTAB） as a surfactant and after calcination at 850 ℃. The physicochemical properties of the materials were characterized by means of XRD, BET, SEM, TEM/SAED （selected-area electron diffraction）, XPS and H2-TPR techniques. It is found that doping Sr2＋ to La2CuO4 lattice enhanced the catalytic activity for methane combustion and the LaSrCuO4 catalyst derived from PEG is the best among the tested ones. It is concluded that factors, such as adsorbed oxygen species concentration, reducibility and surface area, determined the catalytic performance of such single-crystalline materials.

Cyclic Fatigue Fracture of Zr_(55)Al_(10)Ni_5Cu_(30) Bulk Amorphous Alloy with Quenched-in Crystallites

The effects of quenched-in crystallites on the fracture of bulk amorphous alloys under cyclic loading condition wereinvestigated in this paper. For the fully amorphous alloy and specimen with fine crystallites the fatigue crack initiationoccurred on the surface. For the specimen with larger crystallites the crack originated from a big broken crystallitenear the surface. The average striation spacing on amorphous area is much larger than that on the crystallite.Crack initiation occurred at the crystallites is due to that the brittle crystallites broke easily under cyclic deformationcondition. The fine crystallites seemed to be protruded from the amorphous matrix and some bulges appeared onthe surface of specimen with fine crystallites under cyclic loading.

k_(eff)uncertainty quantification and analysis due to nuclear data during the full lifetime burnup calculation for a small-sized prismatic high temperature gas-cooled reactor

To benefit from recent advances in modeling and computational algorithms,as well as the availability of new covariance data,sensitivity and uncertainty analyses are needed to quantify the impact of uncertain sources on the design parameters of small prismatic high-temperature gascooled reactors(HTGRs).In particular,the contribution of nuclear data to the k_(eff)uncertainty is an important part of the uncertainty analysis of small-sized HTGR physical calculations.In this study,a small-sized HTGR designed by China Nuclear Power Engineering Co.,Ltd.was selected for k_(eff)uncertainty analysis during full lifetime burnup calculations.Models of the cold zero power(CZP)condition and full lifetime burnup process were constructed using the Reactor Monte Carlo Code RMC for neutron transport calculation,depletion calculation,and sensitivity and uncertainty analysis.For the sensitivity analysis,the Contribution-Linked eigenvalue sensitivity/Uncertainty estimation via Track length importance Characterization(CLUTCH)method was applied to obtain sensitive information,and the "sandwich" method was used to quantify the k_(eff)uncertainty.We also compared the k_(eff)uncertainties to other typical reactors.Our results show that ^(235)U is the largest contributor to k_(eff)uncertainty for both the CZP and depletion conditions,while the contribution of ^(239)Pu is not very significant because of the design of low discharge burnup.It is worth noting that the radioactive capture reaction of ^(28)Si significantly contributes to the k_(eff)uncertainty owing to its specific fuel design.However,the k_(eff)uncertainty during the full lifetime depletion process was relatively stable,only increasing by 1.12%owing to the low discharge burnup design of small-sized HTGRs.These numerical results are beneficial for neutronics design and core parameters optimization in further uncertainty propagation and quantification study for small-sized HTGR.

Assessment for Production and Operation Ability of Medium and Small-sized Enterprises Based on Neural Network

In order to improve production and operation ability of medium and small-sized enterprises, an assessment-index system of production and operation ability was proposed, and a corresponding assessment model was established based on BP neural network. The conjunction weights of the neural network were continuously modified from output layer to input layer in the process of neural network training to reduce the errors between the anticipated and actual outputs. The results from an example show that this method is reliable and feasible. The production and operation abilitv of an enterorise with assessed result of 0.833 is fairly oowerful, and that with assessed result of 0.644 is average.

Study on Contra-Rotating Small-Sized Axial Flow Hydro Turbine

It is thought that small hydropower generation is alternative energy, and the energy potential of small hydropower is large. The efficiency of small hydro turbines is lower than that of large one, and these small hydro turbine’s common problems are out of operation by foreign materials. Then, there are demands for small hydro turbines to keep high per- formance and wide flow passage. Therefore, we adopted contra-rotating rotors which can be expected to achieve high performance and low-solidity rotors with wide flow passage in order to accomplish high performance and stable opera- tion. Final goal on this study is development of an electric appliance type small hydro turbine which has high portability and makes an effective use of the unused small hydro power energy source. In the present paper, the performance and the internal flow conditions in detail of contra-rotating small-sized axial flow hydro turbine are shown as a first step of the research with the numerical flow analysis. Then, a capability adopting contra-rotating rotors to an electric appliance type small hydro turbine was discussed. Furthermore, the high performance design for it was considered by the numeri- cal analysis results.

Effect of Organic and Chemical Fertilizer Application on Growth, Yield, and Quality of Small-Sized Tomatoes

Tomatoes in Japan are generally cultivated under management systems that use chemical fertilizers and synthetic chemical pesticides. However, the continuous use of these fertilizers and pesticides damages the soil environment and reduces the number of soil microorganisms. Organic farming has a relatively low environmental impact compared to conventional farming techniques, but typically has lower and more unstable yields. In this study, we investigated the effect of organic and chemical fertilizer application on growth, yield, and quality of small-sized (cherry) tomatoes. Cherry tomatoes were cultivated using organic and chemical organic fertilizers. Average weight and lateral diameter were significantly higher under organic fertilizer than under chemical fertilizer. In addition, shoot dry weight was significantly higher under organic fertilizer than chemical fertilizer. Lycopene content was significantly higher under organic fertilizer than chemical fertilizer. The total carbon (TC), total phosphorus (TP), total potassium (TK), available phosphoric (SP) and exchangeable potassium (SK) contents, C/N ratio, and pH were significantly higher under organic fertilizer than chemical fertilizer. Bacterial biomass, nitrite (NO? 2-N) oxidation activity, nitrification (N) circulation activity, and phosphoric (P) circulation were higher under organic fertilizer than chemical fertilizer. From these results, the study indicates that appropriate controls such as TC, total nitrogen (TN), and C/N ratio of organic fertilizer increased microbial biomass and enhanced nutrient circulation such as N circulation activity and P circulation activity. These results can be used to improve current organic farming practices and promote soil conservation.

Tuning surface active oxygen of lanthanum oxide via partial dissolution and regrowth of crystallites

A commercial lanthanum oxide was modified into X%-La2O3 samples via partial dissolution and regrowth of crystallites, wherein the X value denotes the weight percent of the initial metal oxide powder dissolved by nitric acid. BET measurements and TEM observations indicate that the 20%-La2O3 sample has an increased specific surface area, relatively thin and small crystallites in size. TPD/TPR profiles also show that the 20%-La2O3 sample has more surface active oxygen than the 0%-La2O3 sample. Among the four X%-La2O3 samples, the highest activity for methane oxidation was obtained over the 20%-La2O3 sample. Therefore, the present work proves that the method of partial dissolution and regrowth of crystallites are effective to modify surface property of lanthanum oxide.

Dislocations in the Crystallites of Nanocrystalline α-Fe—A Molecular Dynamics Study

Molecular dynamics simulations are carried out in order to Study the atomic structure of crystalline component of nanocrystalline α-Fe when it is consolidated from small grains. A two-dimensional computational block is used to simulate the consolidation process. All the preset dislocations in the original grains glide out of them in the consolidation process, but new dislocations can generate when the grain size is large enough. It shows that dislocations exist in the consolidated material rather than in the original grains. Whether dislocations exist in the crystalline component of the resultant model nano-material depends upon grain size. The critical value of grain size for dislocation generation appears to be about 9 nm. This result agrees with experiments qualitatively.

Performance and Internal Flow of Contra-Rotating Small-Sized Cooling Fan

High pressure and large flow rate small-sized cooling fans are used for servers in data centers and there is a strong demand to increase its performance because of increase of quantity of heat from servers. Contra-rotating rotors have been adopted for some of high pressure and large flow rate cooling fans to meet the demand. The performance curve of the contra-rotating small-sized cooling fan with 40 mm square casing was investigated by an experimental apparatus and its internal flow condition was clarified by the numerical analysis. The fan static pressure of the front rotor was extremely low and it increased significantly at the rear rotor. The uniform flow was achieved at the inlet of the rear rotor because of the special shape of the casing between the front and rear rotors. On the other hand, the tip leakage flow was large enough to influence on the main flow of the test cooling fan by the design specification of high pressure with compact rotor diameter.

Internal Flow Condition between Front and Rear Rotor of Contra-Rotating Small-Sized Axial Fan at Low Flow Rate

Contra-rotating small-sized fans are used as cooling fans for electric equipment. The internal flow condition between the front and rear rotors of the contra-rotating small-sized fan is not known well especially at the low flow rate. Furthermore, the blade row distance between the front and rear rotors is an important parameter for the contra-rotating small-sized fan and its influence on the internal flow condition is not clarified at the low flow rate. Therefore, the internal flow condition of the contra-rotating small-sized fan at the low flow rate is investigated by the numerical analysis in this research. The numerical analysis results are validated by comparing the fan static pressure curves of the numerical results to the experimental results. The internal flow condition at the low flow rate is clarified using the numerical models of the different blade row distance L = 10 mm and 30 mm. In the present paper, pressure fluctuations phase locked each front and rear rotor’s rotation are shown and the influences of the wake and the potential interference are discussed by the unsteady numerical analysis results at the low flow rate.

Study on Construction and Countermeasures of Technological Innovation Environment within Medium and Small-sized Enterprises in Hubei Province

Based on the application of the latest technological innovation theory and the successful experience generated by the domestic and overseas medium and small-sized enterprises, this thesis proposes a theoretical framework, strategic proposition and some secure measures for the regional technological innovation to promote the technological innovation within medium and small-sized enterprises in Hubei Province. In addition, the author also provides some tactics concerning the original motivation, technological market, innovation talents and innovation system, which aim at offering some consultation for the government decision, optimize industrial structure, implement the innovation strategy and propel to the medium and small-sized enterprises＇ development.

Space-to-Ground Quantum Key Distribution Using a Small-Sized Payload on Tiangong-2 Space Lab

Quantum technology establishes a foundation for secure communication via quantum key distribution （QKD）. In the last two decades, the rapid development of QKD makes a global quantum communication network feasible. In order to construct this network, it is economical to consider small-sized and low-cost QKD payloads, which can be assembled on satellites with different sizes, such as space stations. Here we report an experimental demonstration of space-to-ground QKD using a small-sized payload, from Tiangong-2 space lab to Nanshan ground station. The 57.9-kg payload integrates a tracking system, a QKD transmitter along with modules for synchronization, and a laser communication transmitter. In the space lab, a 50MHz vacuum＋weak decoy-state optical source is sent through a reflective telescope with an aperture of 200mm. On the ground station, a telescope with an aperture of 1200mm collects the signal photons. A stable and high-transmittance communication channel is set up with a high-precision bidirectional tracking system, a polarization compensation module, and a synchronization system. When the quantum link is successfully established, we obtain a key rate over 100bps with a communication distance up to 719km. Together with our recent development of QKD in daylight, the present demonstration paves the way towards a practical satellite-constellation-based global quantum secure network with small-sized QKD payloads.

Study on Virtual Training Management in Small-sized Enterprises

This paper firstly analyses the necessity of virtual management in small-sized enterprises, then presents two main modes to implement virtual training management in small-sized enterprises. The paper also points out the best mode for the small-sized enterprises＇ training to implement virtual management.

A Study on USA Promoting the Development of Middle and Small-sized Enterprises and Its Revelation

The middle and small-sized enterprises of USA develop very well, and they are the pillars of American economy. The long-term development of middle and small-sized enterprises lies in suitable supporting countermeasures and clear economic function of the government. The development of middle and small-sized enterprises of USA brings China many useful revelations.

Peers Small-sized Group Work-A Beneficial Form of Classroom Interaction

Classroom interaction plays a critical role in language teaching and learning process.It involves both the teacher-students,and students-students.This article is intended to explore the vital significance of classroom interaction in language learning process with the emphasis placed on the students' involvement in the classroom activities,furthermore,to discover whether the peers small-sized group work is a beneficial and irreplaceable form of classroom interaction.

自然环境老化ETFE薄膜单轴拉伸力学性能研究

ETFE薄膜在自然环境老化后的力学性能是ETFE结构长期使用性能评价的基础。选取在室外自然环境长期使用后的ETFE薄膜,开展了微观形貌表征和宏观力学性能试验,采用能量法确定了自然环境老化ETFE薄膜的屈服点及弹性模量,基于数理统计分析了材料力学参数标准值。研究结果表明,自然环境老化作用使ETFE薄膜材料表面微观形貌粗糙,截面褶皱纹理密集,晶粒尺寸增大了7.8%。老化ETFE薄膜破断强度下降显著,屈服应力及弹性模量降低较大,其标准值为11.73、703.2 MPa,降低了14.9%、13.5%。研究扩展了ETFE薄膜材料力学的研究范畴,可为准确评估ETFE结构长期使用性能提供重要的力学参数。

A low-melting-point metal doping strategy for the synthesis of small-sized intermetallic Pt_(5)Ce fuel cell catalysts

Carbon-supported platinum-lanthanum(Pt-Ln)intermetallic compound(IMC)nanoparticles with high activity and robust stability have been demonstrated as promising cathode catalysts for proton-exchange membrane fuel cells.However,the preparation of Pt-Ln IMC catalysts needs high-temperature annealing treatment that inevitably causes nanoparticle sintering,resulting in significant reduction of the electrochemical surface area and mass-based activity.Here,we prepare small-sized M-doped Pt_(5)Ce(M=Ga,Cd,and Sb)IMCs catalysts via a low-melting-point metal doping strategy.We speculate that the doping of low-melting-point metals can facilitate the generation of vacancies in the crystal lattice through thermal activation and thus reduce the kinetic barriers for the formation of intermetallic Pt_(5)Ce catalysts.The prepared Ga-doped Pt_(5)Ce catalyst exhibits a higher electrochemical active surface area(81 m^(2)·gPt^(-1))and a larger mass activity(0.45 A·mgPt^(-1)at 0.9 V)over the undoped Pt_(5)Ce and commercial Pt/C catalysts.In the membrane electrode assembly test,the Ga-doped Pt_(5)Ce cathode delivers a power density of 0.98 W·cm^(-2)at 0.67 V,along with a voltage loss of only 27 mV at 0.8 A·cm^(-2)at the end of accelerated stability test.

微晶发泡陶瓷保温装饰一体板室内施工工艺分析

针对微晶发泡陶瓷材料特性、优缺点以及适用性进行了总结分析,在此基础上,推演出室内装饰墙面微晶发泡陶瓷一体板应用的3种施工方案,并对各方案的优缺点进行论述,总结了微晶发泡陶瓷在室内装饰墙面施工控制条件以及施工要点,重点分析了微晶发泡陶瓷一体板装配式安装方案实施要点。