TiO2-SnO2-SiO2 nanocomposite photocatalysts were prepared with Na2SiO3·9H2O, SnCl4·5H2O and TiCl4 as precursors by chemistry coating processes and supercritical fluid drying (SCFD) method. Characterizations ...TiO2-SnO2-SiO2 nanocomposite photocatalysts were prepared with Na2SiO3·9H2O, SnCl4·5H2O and TiCl4 as precursors by chemistry coating processes and supercritical fluid drying (SCFD) method. Characterizations with XRD, TEM, NMR and FTIR showed that in addition to anatase type TiO2, a new active phase(Ti,Sn)O2 was also formed in the range of the studied doping concentration, The catalytic activity was evaluated by photocatalytic degradation of phenol as model reaction. SiO2 remained amphorous at all samples. It could prevent from growth of the size of nanopaticle and transformation from anatase to rutile. Compared with pure TiO2, or TiO2-SnO2 catalyst prepared by Sol-gel method, Nano-composite photo-catalyst showed significant improvement in catalytic activity, the photo-catalytic degradation rate of phenol in 7 h reached 88.7%. Application of the composite catalysts for the photocatalytic decomposition of phenol not only gave the same activity relative to pure ultrafine TiO2, but also reduced cost. The experimental results also proved that the thermal stability of TiO2 was greatly enhanced after mixing with small amount of SiO2. The optimized doping of SiO2 was 20.3%. The photo-catalyst prepared by SCFD combination technology was characterized with smaller particle size, larger surface area and higher activity.展开更多
A kind of solar thermochemical cycle based on methanothermal reduction of SnO2 is proposed for H2 and CO production. We find that the oxygen release capacity and thermodynamic driven force for methanothermal reduction...A kind of solar thermochemical cycle based on methanothermal reduction of SnO2 is proposed for H2 and CO production. We find that the oxygen release capacity and thermodynamic driven force for methanothermal reduction of SnO2 are large, and suggest CH4 :SnO2 = 2:1 as the feasible reduction condition for achieving high purities of syngas and avoiding vaporization of produced Sn. Subsequently, the amount of H2 and energetic upgrade factors under different oxidation conditions are compared, in which excess water vapor is found beneficial for hydrogen production and fuel energetic upgradation. Moreover, the effect of incom plete recovery of SnO2 on the subsequent cycle is underscored and explained. After accounting for factors such as isothermal operation and cycle stability, CH4 :SnO2 = 2:1 and H2O:Sn = 4:1 are suggested for highest solar-to-fuel efficiency of 46.1% at nonisothermal condition, where the reduction and oxidation temperature are 1400 and 600 K, respectively.展开更多
Increasing attention has been focused on potassium ion batteries(KIBs) as promising energy-sto rage system(ESS) owing to the abundance and low-cost of potassium resources.Here,SnS2/SnO2 hete rostructures were successf...Increasing attention has been focused on potassium ion batteries(KIBs) as promising energy-sto rage system(ESS) owing to the abundance and low-cost of potassium resources.Here,SnS2/SnO2 hete rostructures were successfully fixed onto stainless steel mesh(SnS2/SnO2/SSM) through a facile two-step hydrothermal method and used as anodes for KIBs.Due to the advantages of SnS2/SnO2 heterostructures and good conductivity of SSM substrate,the SnS2/SnO2/SSM anodes display enhanced electrochemical performance.The SnS2/SnO2/SSM anodes deliver specific capacity of 394 mA h g^-1 at 50 mA g^-1 over 100 cycles,better than SnO2/SSM.Even at 500 mA g^-1 after 250 cycles,high capacity of 155 mA h g^-1 can still be obtained.展开更多
SnO2 and Sb-doped SnO2 particles were synthesized using the polymeric precursor method with different Sn salt precursors： SnCl2.2H2O, SnCl4.5H20, or Sn citrate. Sb2O3 was used as the precursor of Sb, and the molar ra...SnO2 and Sb-doped SnO2 particles were synthesized using the polymeric precursor method with different Sn salt precursors： SnCl2.2H2O, SnCl4.5H20, or Sn citrate. Sb2O3 was used as the precursor of Sb, and the molar ratio of nsn：nsb was held constant. FTIR and TGA/DTA were used to examine the influence of the Sn precursor on the formation and thermal decomposition of the Sn and Sn-Sb complexes. The calcination products obtained from heating the Sn and Sn-Sb complexes at 500℃ in air were analyzed using XRD and TEM analysis. The results revealed that the SnO2 and Sb-doped SnO2 formation temperatures depended on the nature of the Sn precursor. The calcination products were found to be SnO2 and Sb-doped SnO2 particles, which crystallized in a tetragonal cassiterite structure with a highly preferred （110） planar orientation. The Sn precursor and the presence of Sb in the SnO2 matrix strongly influenced the crystallinity and lattice parameters.展开更多
文摘TiO2-SnO2-SiO2 nanocomposite photocatalysts were prepared with Na2SiO3·9H2O, SnCl4·5H2O and TiCl4 as precursors by chemistry coating processes and supercritical fluid drying (SCFD) method. Characterizations with XRD, TEM, NMR and FTIR showed that in addition to anatase type TiO2, a new active phase(Ti,Sn)O2 was also formed in the range of the studied doping concentration, The catalytic activity was evaluated by photocatalytic degradation of phenol as model reaction. SiO2 remained amphorous at all samples. It could prevent from growth of the size of nanopaticle and transformation from anatase to rutile. Compared with pure TiO2, or TiO2-SnO2 catalyst prepared by Sol-gel method, Nano-composite photo-catalyst showed significant improvement in catalytic activity, the photo-catalytic degradation rate of phenol in 7 h reached 88.7%. Application of the composite catalysts for the photocatalytic decomposition of phenol not only gave the same activity relative to pure ultrafine TiO2, but also reduced cost. The experimental results also proved that the thermal stability of TiO2 was greatly enhanced after mixing with small amount of SiO2. The optimized doping of SiO2 was 20.3%. The photo-catalyst prepared by SCFD combination technology was characterized with smaller particle size, larger surface area and higher activity.
基金supported by the National Natural Science Foundation of China(21872105,22072107)the Science&Technology Commission of Shanghai Municipality(19DZ2271500)。
基金supported by the National Key R&D Program of China (Grant no. 2018YFB1502005)the National Natural Science Foundation of China (Grant nos. 51476163 , 51806209 and 81801768)Institute of Electrical Engineering, Chinese Academy of Sciences (No.Y770111CSC)
文摘A kind of solar thermochemical cycle based on methanothermal reduction of SnO2 is proposed for H2 and CO production. We find that the oxygen release capacity and thermodynamic driven force for methanothermal reduction of SnO2 are large, and suggest CH4 :SnO2 = 2:1 as the feasible reduction condition for achieving high purities of syngas and avoiding vaporization of produced Sn. Subsequently, the amount of H2 and energetic upgrade factors under different oxidation conditions are compared, in which excess water vapor is found beneficial for hydrogen production and fuel energetic upgradation. Moreover, the effect of incom plete recovery of SnO2 on the subsequent cycle is underscored and explained. After accounting for factors such as isothermal operation and cycle stability, CH4 :SnO2 = 2:1 and H2O:Sn = 4:1 are suggested for highest solar-to-fuel efficiency of 46.1% at nonisothermal condition, where the reduction and oxidation temperature are 1400 and 600 K, respectively.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51704188,51464020,5170219961705125 and 51802181)the research starting foundation from Shaanxi University of Science and Technology(No.2018GBJ-04)。
文摘Increasing attention has been focused on potassium ion batteries(KIBs) as promising energy-sto rage system(ESS) owing to the abundance and low-cost of potassium resources.Here,SnS2/SnO2 hete rostructures were successfully fixed onto stainless steel mesh(SnS2/SnO2/SSM) through a facile two-step hydrothermal method and used as anodes for KIBs.Due to the advantages of SnS2/SnO2 heterostructures and good conductivity of SSM substrate,the SnS2/SnO2/SSM anodes display enhanced electrochemical performance.The SnS2/SnO2/SSM anodes deliver specific capacity of 394 mA h g^-1 at 50 mA g^-1 over 100 cycles,better than SnO2/SSM.Even at 500 mA g^-1 after 250 cycles,high capacity of 155 mA h g^-1 can still be obtained.
文摘SnO2 and Sb-doped SnO2 particles were synthesized using the polymeric precursor method with different Sn salt precursors： SnCl2.2H2O, SnCl4.5H20, or Sn citrate. Sb2O3 was used as the precursor of Sb, and the molar ratio of nsn：nsb was held constant. FTIR and TGA/DTA were used to examine the influence of the Sn precursor on the formation and thermal decomposition of the Sn and Sn-Sb complexes. The calcination products obtained from heating the Sn and Sn-Sb complexes at 500℃ in air were analyzed using XRD and TEM analysis. The results revealed that the SnO2 and Sb-doped SnO2 formation temperatures depended on the nature of the Sn precursor. The calcination products were found to be SnO2 and Sb-doped SnO2 particles, which crystallized in a tetragonal cassiterite structure with a highly preferred （110） planar orientation. The Sn precursor and the presence of Sb in the SnO2 matrix strongly influenced the crystallinity and lattice parameters.
