以纳米二氧化锡、硝酸钴、脲、葡萄糖和十二烷基硫酸钠为原料,通过水热-碳热还原原位制备锂离子电池Sn-Co-C复合负极材料。通过XRD、SEM、EDS和TEM分析表明,原位生成的Sn-Co合金颗粒分布于纳米或微米尺度的碳球和碳纳米棒内部以及微孔...以纳米二氧化锡、硝酸钴、脲、葡萄糖和十二烷基硫酸钠为原料,通过水热-碳热还原原位制备锂离子电池Sn-Co-C复合负极材料。通过XRD、SEM、EDS和TEM分析表明,原位生成的Sn-Co合金颗粒分布于纳米或微米尺度的碳球和碳纳米棒内部以及微孔碳基体之中。电化学测试表明,在50 m A·g-1电流密度下,Sn-Co-C复合负极材料首次充放电比容量分别为602.9 m Ah·g-1和867.1 m Ah·g-1,循环100次后其充放电比容量仍分别保持在350.4 m Ah·g-1和356.6 m Ah·g-1,平均每次放电容量衰减率仅为5.1%。优异的电化学性能主要归因于Sn-Co合金颗粒处于纳米或微米尺度的碳球和碳纳米棒内部以及微孔碳基体之中可以改善其导电性,并可以缓解锂电池充放电过程中产生的体积变化所导致的活性物质脱落,提高循环性能和寿命。展开更多
以金属锡粉(Sn)、金属钴粉(Co)和乙炔黑为主要原料,综合利用固相烧结和高能球磨的方法制备出Sn-Co-C复合负极材料,采用XRD、SEM、EDS和恒电流充放电等技术对材料进行了表征和电性能测试.实验结果表明:高能球磨处理后,Sn-Co-C复合材料颗...以金属锡粉(Sn)、金属钴粉(Co)和乙炔黑为主要原料,综合利用固相烧结和高能球磨的方法制备出Sn-Co-C复合负极材料,采用XRD、SEM、EDS和恒电流充放电等技术对材料进行了表征和电性能测试.实验结果表明:高能球磨处理后,Sn-Co-C复合材料颗粒尺寸减小,首次放电容量显著提升,为476.8 m Ah/g;经过30次循环后可逆容量仍保持在394.4 m Ah/g.展开更多
As an anode material in lithium ion battery,the Sn-Co/C composite electrode materials have been successfully synthesized by hydrothermal and sol-gel methods,respectively.The resultant composites were mainly composed o...As an anode material in lithium ion battery,the Sn-Co/C composite electrode materials have been successfully synthesized by hydrothermal and sol-gel methods,respectively.The resultant composites were mainly composed of Sn-based oxides,nanometer Sn-Co alloy and carbon.Carbon and Co,acting as buffer materials,can accommodate to the large volume change of active Sn during the discharge-charge process,thus improving the cycling stability.Although charge/discharge curves revealed the excellent cycle performance for samples synthesized by both methods,composites obtained by the sol-gel showed a better dispersion effect of nanoparticles on the carbon matrix and possessed much more improved stable capacity with*624.9 mAh g-1over 100 cycles and that by hydrothermal method only exhibited*299.3 mAh g-1.Therefore,the Sn-Co/C composites obtained by sol-gel synthesis method could be a perfect candidate for anode material of Li-ion storage battery.展开更多
文摘以纳米二氧化锡、硝酸钴、脲、葡萄糖和十二烷基硫酸钠为原料,通过水热-碳热还原原位制备锂离子电池Sn-Co-C复合负极材料。通过XRD、SEM、EDS和TEM分析表明,原位生成的Sn-Co合金颗粒分布于纳米或微米尺度的碳球和碳纳米棒内部以及微孔碳基体之中。电化学测试表明,在50 m A·g-1电流密度下,Sn-Co-C复合负极材料首次充放电比容量分别为602.9 m Ah·g-1和867.1 m Ah·g-1,循环100次后其充放电比容量仍分别保持在350.4 m Ah·g-1和356.6 m Ah·g-1,平均每次放电容量衰减率仅为5.1%。优异的电化学性能主要归因于Sn-Co合金颗粒处于纳米或微米尺度的碳球和碳纳米棒内部以及微孔碳基体之中可以改善其导电性,并可以缓解锂电池充放电过程中产生的体积变化所导致的活性物质脱落,提高循环性能和寿命。
文摘以金属锡粉(Sn)、金属钴粉(Co)和乙炔黑为主要原料,综合利用固相烧结和高能球磨的方法制备出Sn-Co-C复合负极材料,采用XRD、SEM、EDS和恒电流充放电等技术对材料进行了表征和电性能测试.实验结果表明:高能球磨处理后,Sn-Co-C复合材料颗粒尺寸减小,首次放电容量显著提升,为476.8 m Ah/g;经过30次循环后可逆容量仍保持在394.4 m Ah/g.
基金financially supported by the National Natural Science Foundation of China (51201066,51171065)Natural Science Foundation of Guangdong Province (S2012020010937,10351063101000001)+1 种基金Foundation for Distinguished Young Talents in Higher Education of Guangdong (2012LYM_0048)the Scientific Research Foundation of Graduate School of South China Normal University (2013kyjj038)
文摘As an anode material in lithium ion battery,the Sn-Co/C composite electrode materials have been successfully synthesized by hydrothermal and sol-gel methods,respectively.The resultant composites were mainly composed of Sn-based oxides,nanometer Sn-Co alloy and carbon.Carbon and Co,acting as buffer materials,can accommodate to the large volume change of active Sn during the discharge-charge process,thus improving the cycling stability.Although charge/discharge curves revealed the excellent cycle performance for samples synthesized by both methods,composites obtained by the sol-gel showed a better dispersion effect of nanoparticles on the carbon matrix and possessed much more improved stable capacity with*624.9 mAh g-1over 100 cycles and that by hydrothermal method only exhibited*299.3 mAh g-1.Therefore,the Sn-Co/C composites obtained by sol-gel synthesis method could be a perfect candidate for anode material of Li-ion storage battery.
