Tin sulfide (SnS) has analogous structural features to tin selenide (SnSe), but contains more abundant resources as compared with SnSe. SnS has elicited attention as a potential eco-friendly therm oelectric (TE) mater...Tin sulfide (SnS) has analogous structural features to tin selenide (SnSe), but contains more abundant resources as compared with SnSe. SnS has elicited attention as a potential eco-friendly therm oelectric (TE) material. However, the intrinsic carrier concentration of SnS is very low, thereby hindering the performance improvement of the material. This study proposes that the TE properties of polycrystalline Nadoped SnS (synthesized through an improved chemical coprecipitation) can be significantly enhanced. The maximum power factor (PF) of 362 μW m^-1K^-2 at 873 K was achieved, presenting a state-of-the-art value for the polycrystalline SnS. Considering the merits of the improved electrical properties and lower thermal conductivity of SnS, the highest ZT was up to 0.52 at 873 K even without intentional chemical doping. This study offers an effective approach for improving the PF to achieve high ZT in SnS. Hence, we expect that this new perspective can be extended to other dopants and broaden the scope of synthesis technology.展开更多
[020]-oriented tin sulfide nanobelts with a length/thickness ratio of 100 have been synthesized by a facile hydrothermal method without any surfactants, and the nanobelts have shown good strain-accommodating propertie...[020]-oriented tin sulfide nanobelts with a length/thickness ratio of 100 have been synthesized by a facile hydrothermal method without any surfactants, and the nanobelts have shown good strain-accommodating properties as well as good electrochemical performance as the anode for Li-ion batteries. The formation of the nanobelts results from a precipitation-dissolution-transformation mechanism, and the [020] oriented growth can be ascribed to the {010} facet family having the lowest atomic density. In particular, SnS shows clear Li-Sn alloying/de-alloying reversible reactions in the potential range 0.1-1.0 V. Based on galvanostatic measurements and electrochemical impedance spectroscopy, SnS nanobelts have shown impressive rate performance. The post-cycled SnS nanobelts were completely transformed into metallic tin, and preserved the one-dimensional structure due to their flexibility which accommodates the large volumetric expansion.展开更多
基金supported by the National Key R&D Program of China (2018YFB0703603)the Basic Science Center Project of National Natural Science Foundation of China (NSFC, 51788104)the NSFC (11474176)
文摘Tin sulfide (SnS) has analogous structural features to tin selenide (SnSe), but contains more abundant resources as compared with SnSe. SnS has elicited attention as a potential eco-friendly therm oelectric (TE) material. However, the intrinsic carrier concentration of SnS is very low, thereby hindering the performance improvement of the material. This study proposes that the TE properties of polycrystalline Nadoped SnS (synthesized through an improved chemical coprecipitation) can be significantly enhanced. The maximum power factor (PF) of 362 μW m^-1K^-2 at 873 K was achieved, presenting a state-of-the-art value for the polycrystalline SnS. Considering the merits of the improved electrical properties and lower thermal conductivity of SnS, the highest ZT was up to 0.52 at 873 K even without intentional chemical doping. This study offers an effective approach for improving the PF to achieve high ZT in SnS. Hence, we expect that this new perspective can be extended to other dopants and broaden the scope of synthesis technology.
基金Acknowledgements This work was supported by the State Key Project of Fundamental Research for Nanoscience and Nano- technology （Nos. 2011CB932401 and 2011CBA00500）, and the National Natural Science Foundation of China （Nos. 20921001 and 21051001）. We are grateful to Associate Professor Jiaping Wang and lab assistant Fei Zhao in the Tsinghua-Foxconn Nanocenter for their generous help in the fabrication of batteries.
文摘[020]-oriented tin sulfide nanobelts with a length/thickness ratio of 100 have been synthesized by a facile hydrothermal method without any surfactants, and the nanobelts have shown good strain-accommodating properties as well as good electrochemical performance as the anode for Li-ion batteries. The formation of the nanobelts results from a precipitation-dissolution-transformation mechanism, and the [020] oriented growth can be ascribed to the {010} facet family having the lowest atomic density. In particular, SnS shows clear Li-Sn alloying/de-alloying reversible reactions in the potential range 0.1-1.0 V. Based on galvanostatic measurements and electrochemical impedance spectroscopy, SnS nanobelts have shown impressive rate performance. The post-cycled SnS nanobelts were completely transformed into metallic tin, and preserved the one-dimensional structure due to their flexibility which accommodates the large volumetric expansion.
