期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
炭基Sn-ZSM-5沸石膜的制备及其渗透蒸发水中乙酸的应用 被引量:3
1
作者 王献武 杨建华 +2 位作者 鲁金明 王同华 王金渠 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2008年第6期1225-1230,共6页
通过研究Sn-ZSM-5沸石分子筛的合成与表征,确定了在多孔炭管上合成Sn-ZSM-5沸石膜的条件.首先利用水热合成法,在Si(OCH_2CH_3)_4/SnCl_4/NaOH/TPABr/H_2O澄清体系中合成出Sn-ZSM-5沸石分子筛,用扫描电镜(SEM)、X射线衍射(XRD)、红外光谱... 通过研究Sn-ZSM-5沸石分子筛的合成与表征,确定了在多孔炭管上合成Sn-ZSM-5沸石膜的条件.首先利用水热合成法,在Si(OCH_2CH_3)_4/SnCl_4/NaOH/TPABr/H_2O澄清体系中合成出Sn-ZSM-5沸石分子筛,用扫描电镜(SEM)、X射线衍射(XRD)、红外光谱(IR)、紫外光谱(UV-Vis)证实锡元素进入到分子筛晶体骨架;利用预涂晶种法在炭载体表面上合成出完整的不同锡含量的Sn-ZSM-5沸石膜.在90℃下对于5wt%的乙酸溶液,Si/Sn=25的沸石膜的分离系数为4.1,总通量达到1.18kg·m^(-2)·h^(-1). 展开更多
关键词 炭基sn-zsm-5沸石膜 渗透蒸发 乙酸/水
下载PDF
新型炭支撑体上无模板剂制备高硅ZSM-5沸石膜
2
作者 邹本雪 司波 张雄福 《辽东学院学报(自然科学版)》 CAS 2007年第3期161-165,共5页
在炭支撑体上预先涂敷silicalite-1晶种,经二次水热合成法成功地制备了无模板剂的高硅ZSM-5沸石复合膜,经XRD、SEM和渗透性能测试,合成的炭基-沸石复合膜连续、致密,显示出一定的分子选择性能。实验中对合成液中钠硅比,水硅比和硅铝比... 在炭支撑体上预先涂敷silicalite-1晶种,经二次水热合成法成功地制备了无模板剂的高硅ZSM-5沸石复合膜,经XRD、SEM和渗透性能测试,合成的炭基-沸石复合膜连续、致密,显示出一定的分子选择性能。实验中对合成液中钠硅比,水硅比和硅铝比等因素对沸石复合膜性能的影响进行了初步探讨。结果表明,尽管晶种的存在削弱了Na+的结构导向作用,但是Na+和Al3+的作用不能忽视。炭支撑体上晶种的存在促进了沸石膜的生长,对沸石膜的形成起着重要的作用。 展开更多
关键词 沸石 模板剂 ZSM-5沸石膜 多孔炭 无机膜
下载PDF
Adsorption dynamics of ethane from air in structured fixed beds with different microfibrous composites
3
作者 Huan Xiang Huiping Zhang +1 位作者 Pengfei Liu Ying Yan 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第1期14-24,共11页
Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrap... Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrapped activated carbon(MEAC)composites were prepared by wet layup papermaking/sintering technique and in-situ hydrothermal method.Microfibrous composites were characterized by X-ray diffraction,scanning electron microscopy and N2 adsorption/desorption.Structured fixed beds were designed by filling granular adsorbents(5A zeolite or activated carbon)and microfibrous composites at the inlet and outlet of the beds,respectively.Effects of flow rate,bed height and structure on the breakthrough curves were investigated.The length of unused bed(LUB)was determined,and Yoon–Nelson model was used to fit the breakthrough curves.The experimental results showed ethane was effectively adsorbed on the granular adsorbents and microfibrous composites.Both composites could decrease the LUB values and enhance bed utilization.All breakthrough curves fitted well to Yoon–Nelson model,with correlation coefficient exceeding 0.89.The adsorption rate of ethane could be improved in the structured fixed beds,which showed an enhanced mass transfer efficiency for ethane adsorption.LUB values of structured fixed beds with 5A/PSSF composites were larger,the bed utilization values were lower,and the adsorption rate constants were higher than those with MEAC composites under the same conditions. 展开更多
关键词 5A zeolite membrane Microfibrous entrapped activated carbon ETHANE Structured fixed bed Adsorption dynamics
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部