In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries（LIBs）—SnS2 nanoparticle/graphene（SnS2 NP/GNs） nanocomposite.The nanocomposite consists of SnS2nanoparticles ...In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries（LIBs）—SnS2 nanoparticle/graphene（SnS2 NP/GNs） nanocomposite.The nanocomposite consists of SnS2nanoparticles with an average diameter of 4 nm and graphene nanosheets without restacking.The SnS2 nanoparticles are firmly anchored on the graphene nanosheets.As an anode material for LIBs,the nanocomposite exhibits good Li storage performance especially high rate performance.At the high current rate of 5,10,and 20 A/g,the nanocomposite delivered high capacities of 525,443,and 378 mAh/g,respectively.The good conductivity of the graphene nanosheets and the small particle size of SnS2contribute to the electrochemical performance of SnS2 NP/GNs.展开更多
We report a γ-ray irradiation reduction method to prepare MnO/reduced graphene oxide （rCO） nanocomposite for the anode of lithium ion batteries. γ-Ray irradiation provides a clean way to generate homogeneously dis...We report a γ-ray irradiation reduction method to prepare MnO/reduced graphene oxide （rCO） nanocomposite for the anode of lithium ion batteries. γ-Ray irradiation provides a clean way to generate homogeneously dispersed MnO nanoparticles with finely tuned size on rGO surface without the use of surfactant. The MnO/rGO composite enables a fully charge/discharge in 2 min to gain a reversible specific capacity of 546 （mA-h）/g which is 45 higher than the theoretical value of commercial graphite anode.展开更多
We report a novel chemical vapor deposition （CVD） based strategy to synthesize carbon-coated Fe203 nanoparticles dispersed on graphene sheets （Fe2Og@C@G）. Graphene sheets with high surface area and aspect ratio ar...We report a novel chemical vapor deposition （CVD） based strategy to synthesize carbon-coated Fe203 nanoparticles dispersed on graphene sheets （Fe2Og@C@G）. Graphene sheets with high surface area and aspect ratio are chosen as space restrictor to prevent the sintering and aggregation of nanoparticles during high temperature treatments （800 ℃）. In the resulting nanocomposite, each individual Fe2O3 nanoparticle （5 to 20 nm in diameter） is uniformly coated with a continuous and thin （two to five layers） graphitic carbon shell. Further, the core-shell nanoparticles are evenly distributed on graphene sheets. When used as anode materials for lithium ion batteries, the conductive-additive-free Fe2OB@C@G electrode shows outstanding Li＋ storage properties with large reversible specific capacity （864 mAh/g after 100 cycles）, excellent cyclic stability （120% retention after 100 cycles at 100 mA/g）, high Coulombic efficiency （-99%）, and good rate capability.展开更多
Two-dimensional(2 D) hierarchical Mn_(2)O_(3)@graphene composite is synthesized by a one-step solid-phase reaction. The nanosheets of Mn_(2)O_(3) are vertically grown on few-layered graphene, constructing a unique2 D ...Two-dimensional(2 D) hierarchical Mn_(2)O_(3)@graphene composite is synthesized by a one-step solid-phase reaction. The nanosheets of Mn_(2)O_(3) are vertically grown on few-layered graphene, constructing a unique2 D hierarchical structure. As an anode material for lithium-ion batteries(LIBs), this hierarchical composite displays excellent electrochemical performances, showing an extraordinary reversible discharge capacity of 2125.9 mA hg^(–1). Moreover, a record high reversible capacity of 1746.8 mA hg^(–1) is maintained after 100 cycles at a current density of 100 mA g^(–1), which retains 82.2 % of the initial capacity. Such an outstanding performance could be attributed to its novel structure and the synergistic effects between the Mn_(2)O_(3) and graphene.展开更多
LiMn2O4 nanoparticles are facilely synthesized using a sol-gel processing method. Graphene is added to LiMn2O4 electrode aiming at increasing specific capacity and improving rate capability. In order to further improv...LiMn2O4 nanoparticles are facilely synthesized using a sol-gel processing method. Graphene is added to LiMn2O4 electrode aiming at increasing specific capacity and improving rate capability. In order to further improve cycling stability of LiMn2O4/graphene electrode, atomic layer deposition （ALD） is used to deposit ultrathin ZnO coating composed of six ZnO ALD layers and modify the surface of either LiMn2O4/graphene electrode or individual LiMn2O4 particles to form nanoarchitectured LiMn2O4/graphene/ZnO electrodes. Both ZnO-ALD-modified LiMn2O4/graphene electrodes demonstrate enhanced cycling performance at 1C, retaining the final discharge capacity above 122 mA h g 1 after 100 electrochemical cycles, which is higher than 115 mA h g-1 of pristine LiMn2O4/graphene electrode and 109 mA h g-1 of bare LiMn2O4 electrode. The improved electrochemical performance of nanoarchitectured LiMn2O4/graphene/ZnO electrodes can be attributed to the cooperative effects from high electronic conductivity of graphene sheets to facilitate electron transportation and effective protection of ZnO ALD coating to restrict Mn dissolution and electrolyte decomposition.展开更多
Compound Zn2Sn0.8Ti0.2O4 was synthesized by a hydrothermal method in which SnCl4-5H2O,TiCl4,ZnCl2 and N2H4-H2O were used as reactants.The composite Zn2Sn0.8Ti0.2O4/C was then prepared through a carbothermic reduction ...Compound Zn2Sn0.8Ti0.2O4 was synthesized by a hydrothermal method in which SnCl4-5H2O,TiCl4,ZnCl2 and N2H4-H2O were used as reactants.The composite Zn2Sn0.8Ti0.2O4/C was then prepared through a carbothermic reduction process using the as-prepared Zn2Sn0.8Ti0.2O4 and glucose as reactants.The structure,morphology and electrochemical properties of the as-prepared products were investigated by XRD,XPS,TEM and electrochemical measurements.In addition,electrochemical Li insertion/extraction in composite Zn2Sn0.8Ti0.2O4/C were examined by ex situ XRD and SEM.The first discharge capacity of Zn2SnO4 is about 1670.8 mA-h/g,with a capacity retain of 342.7 mA-h/g in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05-3.0 V.Comparing with the Zn2SnO4,some improved electrochemical properties are obtained for Zn2Sn0.8Ti0.2O4,Zn2SnO4/C and Zn2Sn0.8Ti0.2O4/C.The composite Zn2Sn0.8Ti0.2O4/C shows the best electrochemical properties,and its first discharge capacity is about 1530.0 mA-h/g,with a capacity retain of 479.1 mA-h/g the 100th cycle.展开更多
通过氧化石墨烯(GO)和壳聚糖(Cs)之间的氢键以及静电作用形成GO水凝胶,从而将纳米硅颗粒和碳纳米管(CNT)原位包封于其中,再经冷冻干燥及随后的热处理制得三维硅/碳纳米管/石墨烯(Si-CNT@G)纳米复合材料。采用X射线衍射(XRD)、扫描电子...通过氧化石墨烯(GO)和壳聚糖(Cs)之间的氢键以及静电作用形成GO水凝胶,从而将纳米硅颗粒和碳纳米管(CNT)原位包封于其中,再经冷冻干燥及随后的热处理制得三维硅/碳纳米管/石墨烯(Si-CNT@G)纳米复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)、热重分析(TGA)等技术对制得样品的物相、结构和微观形貌等进行了表征。结果表明,所得复合材料在CNT纵横交织的石墨烯网络中,均匀地分布着纳米硅颗粒。当作为锂离子电池的负极材料时,在两种碳介质的协同作用下,有效缓冲硅材料在充放电过程中脱/嵌锂引起的体积变化,缩短了锂离子和电子传输的距离,Si-CNT@G复合材料表现出较好的循环稳定性以及倍率性能。在500 m A·g^-1的充放电电流密度下,经过200圈循环后,其放电比容量仍高达673.7 m Ah·g^-1,容量保持率高达97%;即使将充放电电流密度升至2000 m A·g^-1时,该复合材料仍保持有566.9 m Ah·g^-1的高可逆放电比容量。独特的制备方法和优越的储锂性能,使得Si-CNT@G纳米复合材料成为理想的高性能锂离子电池负极材料的候选.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 21475085)the key scientific research project of high schools in Henan Province (Nos. 16A430025 & 17A480009)
文摘In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries（LIBs）—SnS2 nanoparticle/graphene（SnS2 NP/GNs） nanocomposite.The nanocomposite consists of SnS2nanoparticles with an average diameter of 4 nm and graphene nanosheets without restacking.The SnS2 nanoparticles are firmly anchored on the graphene nanosheets.As an anode material for LIBs,the nanocomposite exhibits good Li storage performance especially high rate performance.At the high current rate of 5,10,and 20 A/g,the nanocomposite delivered high capacities of 525,443,and 378 mAh/g,respectively.The good conductivity of the graphene nanosheets and the small particle size of SnS2contribute to the electrochemical performance of SnS2 NP/GNs.
基金This work was supported by the National Natural Science Foundation of China （No.21373197）, the 100 Talents Program of the Chinese Academy of Sciences, USTC Startup and the Fundamental Research Funds for the Central Universities （WK2060140018）.
文摘We report a γ-ray irradiation reduction method to prepare MnO/reduced graphene oxide （rCO） nanocomposite for the anode of lithium ion batteries. γ-Ray irradiation provides a clean way to generate homogeneously dispersed MnO nanoparticles with finely tuned size on rGO surface without the use of surfactant. The MnO/rGO composite enables a fully charge/discharge in 2 min to gain a reversible specific capacity of 546 （mA-h）/g which is 45 higher than the theoretical value of commercial graphite anode.
文摘We report a novel chemical vapor deposition （CVD） based strategy to synthesize carbon-coated Fe203 nanoparticles dispersed on graphene sheets （Fe2Og@C@G）. Graphene sheets with high surface area and aspect ratio are chosen as space restrictor to prevent the sintering and aggregation of nanoparticles during high temperature treatments （800 ℃）. In the resulting nanocomposite, each individual Fe2O3 nanoparticle （5 to 20 nm in diameter） is uniformly coated with a continuous and thin （two to five layers） graphitic carbon shell. Further, the core-shell nanoparticles are evenly distributed on graphene sheets. When used as anode materials for lithium ion batteries, the conductive-additive-free Fe2OB@C@G electrode shows outstanding Li＋ storage properties with large reversible specific capacity （864 mAh/g after 100 cycles）, excellent cyclic stability （120% retention after 100 cycles at 100 mA/g）, high Coulombic efficiency （-99%）, and good rate capability.
基金financially supported by the National Natural Science Foundation of China(No.21878226)。
文摘Two-dimensional(2 D) hierarchical Mn_(2)O_(3)@graphene composite is synthesized by a one-step solid-phase reaction. The nanosheets of Mn_(2)O_(3) are vertically grown on few-layered graphene, constructing a unique2 D hierarchical structure. As an anode material for lithium-ion batteries(LIBs), this hierarchical composite displays excellent electrochemical performances, showing an extraordinary reversible discharge capacity of 2125.9 mA hg^(–1). Moreover, a record high reversible capacity of 1746.8 mA hg^(–1) is maintained after 100 cycles at a current density of 100 mA g^(–1), which retains 82.2 % of the initial capacity. Such an outstanding performance could be attributed to its novel structure and the synergistic effects between the Mn_(2)O_(3) and graphene.
基金supported by the LABOR-RCS grant (LEQSF(2011-14)-RD-A-13)
文摘LiMn2O4 nanoparticles are facilely synthesized using a sol-gel processing method. Graphene is added to LiMn2O4 electrode aiming at increasing specific capacity and improving rate capability. In order to further improve cycling stability of LiMn2O4/graphene electrode, atomic layer deposition （ALD） is used to deposit ultrathin ZnO coating composed of six ZnO ALD layers and modify the surface of either LiMn2O4/graphene electrode or individual LiMn2O4 particles to form nanoarchitectured LiMn2O4/graphene/ZnO electrodes. Both ZnO-ALD-modified LiMn2O4/graphene electrodes demonstrate enhanced cycling performance at 1C, retaining the final discharge capacity above 122 mA h g 1 after 100 electrochemical cycles, which is higher than 115 mA h g-1 of pristine LiMn2O4/graphene electrode and 109 mA h g-1 of bare LiMn2O4 electrode. The improved electrochemical performance of nanoarchitectured LiMn2O4/graphene/ZnO electrodes can be attributed to the cooperative effects from high electronic conductivity of graphene sheets to facilitate electron transportation and effective protection of ZnO ALD coating to restrict Mn dissolution and electrolyte decomposition.
基金Project (51004028) supported by the National Natural Science Foundation of China
文摘Compound Zn2Sn0.8Ti0.2O4 was synthesized by a hydrothermal method in which SnCl4-5H2O,TiCl4,ZnCl2 and N2H4-H2O were used as reactants.The composite Zn2Sn0.8Ti0.2O4/C was then prepared through a carbothermic reduction process using the as-prepared Zn2Sn0.8Ti0.2O4 and glucose as reactants.The structure,morphology and electrochemical properties of the as-prepared products were investigated by XRD,XPS,TEM and electrochemical measurements.In addition,electrochemical Li insertion/extraction in composite Zn2Sn0.8Ti0.2O4/C were examined by ex situ XRD and SEM.The first discharge capacity of Zn2SnO4 is about 1670.8 mA-h/g,with a capacity retain of 342.7 mA-h/g in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05-3.0 V.Comparing with the Zn2SnO4,some improved electrochemical properties are obtained for Zn2Sn0.8Ti0.2O4,Zn2SnO4/C and Zn2Sn0.8Ti0.2O4/C.The composite Zn2Sn0.8Ti0.2O4/C shows the best electrochemical properties,and its first discharge capacity is about 1530.0 mA-h/g,with a capacity retain of 479.1 mA-h/g the 100th cycle.
文摘通过氧化石墨烯(GO)和壳聚糖(Cs)之间的氢键以及静电作用形成GO水凝胶,从而将纳米硅颗粒和碳纳米管(CNT)原位包封于其中,再经冷冻干燥及随后的热处理制得三维硅/碳纳米管/石墨烯(Si-CNT@G)纳米复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)、热重分析(TGA)等技术对制得样品的物相、结构和微观形貌等进行了表征。结果表明,所得复合材料在CNT纵横交织的石墨烯网络中,均匀地分布着纳米硅颗粒。当作为锂离子电池的负极材料时,在两种碳介质的协同作用下,有效缓冲硅材料在充放电过程中脱/嵌锂引起的体积变化,缩短了锂离子和电子传输的距离,Si-CNT@G复合材料表现出较好的循环稳定性以及倍率性能。在500 m A·g^-1的充放电电流密度下,经过200圈循环后,其放电比容量仍高达673.7 m Ah·g^-1,容量保持率高达97%;即使将充放电电流密度升至2000 m A·g^-1时,该复合材料仍保持有566.9 m Ah·g^-1的高可逆放电比容量。独特的制备方法和优越的储锂性能,使得Si-CNT@G纳米复合材料成为理想的高性能锂离子电池负极材料的候选.
