In current research work,Dy3+substituted Mg0.5Cu0.25Co0.25Fe2-xDyxO4(0.0≤x≤0.04 with the step interval of 0.01)soft ferrites were synthesized by the sol-gel auto combustion method.The prepared samples were character...In current research work,Dy3+substituted Mg0.5Cu0.25Co0.25Fe2-xDyxO4(0.0≤x≤0.04 with the step interval of 0.01)soft ferrites were synthesized by the sol-gel auto combustion method.The prepared samples were characterized by the techniques using X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared(FTIR)spectroscopy,curre nt-voltage(Ⅰ-Ⅴ)measurement,LCR meter,vibrating sample magnetometer(VSM)and Raman.XRD data reveal that the average crystallite size is 49.71 nm and the lattice constant is 0.83703 nm for sample x=0.03.The non-uniform grain growth was demonstrated by micrographs and impurity-free elemental composition was observed from EDX analysis.The DC resistivity has an increasing and decreasing trend in ferromagnetic and paramagnetic regions with an increase in temperature.Moreover,the high resistivity is observed with the order of 1010Ω·cm,and the activation energy is 0.944 eV for samples x=0.03.The dielectric parameters including dielectric constant,dielectric losses,and impedance gradually decrease with the increase in frequency from 8 Hz to 8 MHz.The minimum dielectric loss at high frequency is found for sample x=0.03.The coercivity(Hc)and saturation magnetization(Ms)are found in the ranges of 520.82-544.02 Oe and 20.5841-21.1473 emu/g,respectively.These observations confirm that dysprosium(x=0.03)doped MCC-soft ferrites may be applicable in transformer cores,microwave absorbance,and telecommunication devices.展开更多
The deformation and micro-voids formation mechanisms in ferrite / bainite（ F / B） multi-phase steel with the volume fraction of bainite less than 50% were studied by numerical simulation and experimental observation...The deformation and micro-voids formation mechanisms in ferrite / bainite（ F / B） multi-phase steel with the volume fraction of bainite less than 50% were studied by numerical simulation and experimental observation. The results show that the micro-strain concentrates at the soft / hard phase（ F / B） interface in the multi-phase steel,which should be correlated with the mechanism of incoordinate deformation. During the necking of the steel,the micro-voids initially form around the F / B interface,which also form in ferrite and bainite with the severe strain. The micro-voids in bainite are more dense and finer than those in ferrite. The failure mechanism of bainite is the coalescence of micro-voids,and the failure mechanism of ferrite is the growth and tearing of micro-voids. Due to the different failure mechanisms of ferrite and bainite,a suitable part of soft phase would be beneficial to the capability of anti-failure of F / B multi-phase steel during the ductile fracture.展开更多
文摘In current research work,Dy3+substituted Mg0.5Cu0.25Co0.25Fe2-xDyxO4(0.0≤x≤0.04 with the step interval of 0.01)soft ferrites were synthesized by the sol-gel auto combustion method.The prepared samples were characterized by the techniques using X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared(FTIR)spectroscopy,curre nt-voltage(Ⅰ-Ⅴ)measurement,LCR meter,vibrating sample magnetometer(VSM)and Raman.XRD data reveal that the average crystallite size is 49.71 nm and the lattice constant is 0.83703 nm for sample x=0.03.The non-uniform grain growth was demonstrated by micrographs and impurity-free elemental composition was observed from EDX analysis.The DC resistivity has an increasing and decreasing trend in ferromagnetic and paramagnetic regions with an increase in temperature.Moreover,the high resistivity is observed with the order of 1010Ω·cm,and the activation energy is 0.944 eV for samples x=0.03.The dielectric parameters including dielectric constant,dielectric losses,and impedance gradually decrease with the increase in frequency from 8 Hz to 8 MHz.The minimum dielectric loss at high frequency is found for sample x=0.03.The coercivity(Hc)and saturation magnetization(Ms)are found in the ranges of 520.82-544.02 Oe and 20.5841-21.1473 emu/g,respectively.These observations confirm that dysprosium(x=0.03)doped MCC-soft ferrites may be applicable in transformer cores,microwave absorbance,and telecommunication devices.
基金Item Sponsored by National Basic Research Program of China(2010CB630801)
文摘The deformation and micro-voids formation mechanisms in ferrite / bainite（ F / B） multi-phase steel with the volume fraction of bainite less than 50% were studied by numerical simulation and experimental observation. The results show that the micro-strain concentrates at the soft / hard phase（ F / B） interface in the multi-phase steel,which should be correlated with the mechanism of incoordinate deformation. During the necking of the steel,the micro-voids initially form around the F / B interface,which also form in ferrite and bainite with the severe strain. The micro-voids in bainite are more dense and finer than those in ferrite. The failure mechanism of bainite is the coalescence of micro-voids,and the failure mechanism of ferrite is the growth and tearing of micro-voids. Due to the different failure mechanisms of ferrite and bainite,a suitable part of soft phase would be beneficial to the capability of anti-failure of F / B multi-phase steel during the ductile fracture.
