Deformation mechanism and hydrocarbon significance of Eocene organic-rich fine-grained soft sediments in the Leijia Region,Liaohe Depression

The deformation structure of soft sediments has always been a research hotspot,which is of great significance for analyzing the tectonic and sedimentary evolution background of a basin,as well as the physical properties of reservoirs.Previous studies have reported that a large number of soft sediment deformation structures are developed in the western part of Liaohe depression.In this study,through core observation and thin section identification,various types of deformation structures are identified in the core samples which are collected from the upper Es4 in the Leijia region,western sag of Liaohe depression,such as liquefied dikes,liquefied breccia,convoluted laminae,annular bedding,synsedimentary faults,vein structures,etc.Based on the characteristics of core structure,single well profile and continuous well profile,combined with the regional background,this study clarifies that the deformation structure of soft sediments in the study area is mainly caused by seismic action.It is found that the permeability and porosity of deformation layers in the study area are higher than those of the undeformation layers,which proves that the deformation structure of soft sediments has a good effect on improving the physical properties of reservoirs.

Predicting the sinkage of a moving tracked mining vehicle using a new rheological formulation for soft deep-sea sediment

The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.

Typical Soft–Sediment Deformation Structures Induced by Freeze/Thaw Cycles: A Case Study of Quaternary Alluvial Deposits in the Northern Qiangtang Basin, Tibetan Plateau

With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at Dogai Coring, northern Qiangtang Basin, Tibetan Plateau. Deformation is present in the form of plastic structures(diapirs, folds and clastic dykes), brittle structures(micro–faults) and cryogenic wedges. These soft–sediment deformation features(except the micro–faults) are mainly characterized by meter–scale, non–interlayered, low–speed and low–pressure displacements within soft sediments, most commonly in the form of plastic deformation. Taking into account the geographic setting, lithology and deformation features, we interpret these soft–sediment deformation features as the products of freeze/thaw cycles, rather than of earthquake–induced shock waves, thus reflecting regional temperature changes and fluctuations of hydrothermal conditions in the uppermost sediments. The micro–faults(close to linear hot springs) are ascribed to regional fault activity;however, we were unable to identify the nature of the micro–faults, perhaps due to disturbance by subsequent freeze/thaw cycles. This study may serve as a guide to recognizing the differences between deformation structures attributed to freeze/thaw cycles and seismic processes.

Simulation of the dynamic disturbance characteristics of the soft sediment in the Diexi ancient dammed lake,China

In an earlier study of the Diexi ancient dammed lake along the Minjiang River in Southwest China,10 disturbed layers with envelope and flame structures were found in more than 240 m of lacustrine sediments.In this paper,the soft-sediment disturbances caused by earthquakes in the Diexi ancient dammed lake were studied based on field investigations and laboratory core observations.A two-to three-degree-of-freedom spring-type earthquake simulation vibration table was used to carry out disturbance tests on lacustrine sediments under different dynamic conditions.The results support the following conclusions:(1)The disturbance layers in the lacustrine sediments were caused by strong earthquakes in the region.(2)The characteristics of the disturbance layers are related to the seismic parameters and the degree of sediment consolidation.(3)The greater the earthquake intensity is,the greater the disturbance amplitude is;moreover,the lower the consolidation degree is,the greater the disturbance amplitude.(4)The simulation tests verify that the disturbance layers in the sediments of the Diexi ancient dammed lake correspond to strong earthquakes in the region.These results are valuable for ongoing palaeoseismic research in the region.

Soft Sediment Deformation Structures in the Maastrichtian Patti Formation, Southern Bida Basin Nigeria: Implications for the Assessment of Endogenic Triggers in the Maastrichtian Sedimentary Record

Detailed fieldwork carried out in the southern part of Bida Basin, Nigeria, allowed the documentation of soft sediment deformation structures (SSDS) in the Maastrichtian Patti Formation. The aim of this study is to examine the sedimentary successions, describe and analyse these deformation features, discuss their deformation mechanisms and potential triggers. The Maastrichtian Patti Formation is composed of lithofacies interpreted to have been deposited in tidal and fluvial sedimentary environments. Soft sediment deformation structures recognised in the tidal sediments were clastic dykes, load cast, isolated sand balls, dish-and-pillar structures, convolute lamination, diapiric structures and recumbent folds. Severely deformed cross beds, ring structures, associated sand balls, normal folds and recumbent folds were identified in the fluvial sediments. SSDS recognised were interpreted to have been caused by effects of liquefaction and fluidization. Field observations, facies analysis and morphology of the SSDS indicate that there are relationship between the depositional environments and SSDS. Endogenic processes are considered as the trigger agents and they are represented by rapid sedimentation and overloading, impact of breaking waves, pressure fluctuations caused by turbulent water flow, cyclic stress and current generated by storm waves and changes in water table. The present study did not identify exogenic processes as trigger agent. The occurrence of SSDS in southern Bida Basin strongly favoured a non-tectonic origin but a clear relationship high energy processes in tidal and fluvial depositional environments.

Two new records of Spiochaetopterus Sars, 1856 (Chaetopteridae, Polychaeta) from Chinese waters

The present paper records two chaetopterid species, S piochaetopterus koreana and S. sanbanzensis not reported previously from China Seas. S piochaetopterus koreana is distributed in the Yellow, East China and South China Seas. Sp iochaetopterus sanbanzensis is widely distributed in the muddy benthic environment of the Yellow Sea. Detailed descriptions and illustrations of each species are provided.