Research on Software Radio Fuze

The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.

A New Signal Processing Technique of π/4-DQPSK Modem Based on Software Radio

DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.

Design of BPS digital frontend for software defined radio receiver

In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.

Software Radio: A Review of Design Considerations and Digital Hardware Choices

This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal processors (DSPs) and general purpose processors (GPPs) - meet them.

A Software Defined Open Wi-Fi Platform

Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processing. Such system can help accelerate research and development of future wireless network, especially in the case of cellular/Wi-Fi co-existing networks. This platform is based on the Intel general-purpose processor and the universal software radio peripheral(USRP) radio front end. The design including the physical layer implementations is purely software and is optimized for real-time signal processing on the general purpose processor. In the lab experiment, this platform supports baseband rate up to 700 Mbps with 2 transmitters in 80 MHz bandwidth. A cellular-Wi-Fi signaling interface between the Wi-Fi access point(AP) and the 5G core network is also developed and validated as an example for wireless resource allocation.

Small MEMS smart antenna for software radio fuze

The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning,multi-beam forming and so on,which can improve the ability of detecting,sensing and tracking multiple targets of the fuze. The small RF MEMS smart antenna consists of a 2 × 2 aperture coupled antenna array and six 1-bit MEMS phase shifters. Simulated results demonstrate that the antenna can complete beam steering angles of ± 30° in both X and Y plane at 17. 3 GHz. All components can be fabricated and monolithically integrated with MEMS technology which causes the system low cost and small volume. The RF MEMS smart antenna presents a good and important prospect for the development of the software radio fuze antenna.

Study of Software Radio Receiver Development Platform

The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.

Experimental approach for seeing through walls using Wi-Fi enabled software defined radio technology

Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety of hazardous military and government operations. In this paper, we develop through-wall virtual imaging using Wi-Fi enabled software defined radio to see moving objects and their relative locations. We use LabVIEW and NI Universal Software Radio Peripheral （NI USRP2921 radios with Ettus Research LP0965 directive antennas） devices to detect moving objects behind walls by sending and receiving a signal with respect to the USRP＇s location. Based on the signal-to-interference ratio of our signal （rather than the traditional signal-to-noise method）, we could determine the target object behind the wall. The two major applications for this project are： detecting an active shooter that is standing on the other side of the wall and detecting abnormalities in the human body such as breast cancer with more sensitive antennas. Likewise, firefighters, law enforcement officers, and military men would find more practical purposes for the use of this system in their fields. We evaluate the proposed model using experimental results.

Universal Band Pass Sampling Algorithm for Integration of Multiple Wireless Technologies Using Software Defined Radio Platform

Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for as much portion of the circuitry as possible, so that the implementation could be carried out by programmable digital processors. For this purpose, the incoming radio frequency (RF) signal is down converted to baseband spectrum using band pass sampling method. Research works carried out so far in this field have developed a few algorithms for band pass sampling. But, these algorithms are not much useful for most of the mobile communication systems and they use complex methodology for computing the sampling frequency values. In order to use the SDR platform to integrate all current wireless technologies, an efficient, cost effective and less complex algorithm that can be labelled as universal band pass sampling algorithm is developed in this paper for multiple mobile systems. This algorithm is based on a novel idea of inserting guard bands between the signals which reduces the design complexities of perfect ADC and sharp cut off filters. Using this algorithm, valid sampling frequency ranges and corresponding IF values are calculated for down converting RF signals. The algorithm is tested for six RF signals of different wireless technologies which are integrated and simultaneously down converted using SDR based front end receiver and thus the system multiplies the base station capacity by a factor of six. The simulation results are obtained and shown in this paper which proves that the algorithm developed works well for most of the wireless technologies.

Digital Radio Broadcasting for Community Radios Using Pseudo-random Codes

This paper aims to present a digital radio broadcasting system that explores the advantages of pseudo-random codes. In this context, a transmitter and its dual receiver are able to reuse frequency spectrum bands without interfering on other existing communication systems. It is proposed a communication system that allows radio broadcasting with the following characteristics: lower transmission power, new communication channels and digital signal processing techinques to add positioning services in two dimensions.

Design and Implementation of Programmable RS Codec Module in Satellite Communication Modem

In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The module includes the RS codec unit, the interleaver and deinterleaver unit, the scrambler and descrambler unit and the frame synchronization unit. The module is realized successfully and it can be programmed on-line to meet the requirements of IESS 308/309/310 including many specifications about different service types and data rates. With the implementation combining FPGA with ASICs, size of the circuit is much reduced, its flexibility dramatically increased, and its stability further strengthened. Furthermore, the module is based on the software radio concept and can be easily integrated into the whole satellite communication modem.

Adaptive double-threshold energy detection algorithm for cognitive radio

Due to the fact that the conventional spectrum sensing algorithm is susceptible to noise, an adaptive double-threshold energy detection algorithm for a cognitive radio is proposed. Based on double-threshold energy detection, the algorithm can adaptively switch between one-round sensing and two-round sensing by comparing the observations with the pre-fixed thresholds. Mathematical expressions for the probability of detection, the probability of false alarm, and the sensing time are derived. The relationships including signal to noise ratio （SNR） vs. the probability of detection and SNR vs. the sensing time are plotted using Monte Carlo simulation and the algorithm is verified in a real cognitive system based on GNU Radio and universal software radio peripheral （USRP）. Simulation and experimental results show that, compared with the existing spectrum sensing method, the proposed algorithm can achieve a higher probability of detection within a reasonable sensing time.

Digital Channelization Technology for HF Communication Base on Fast Filter Bank

Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteristic of frequency response, e.g., steep transitional band and sharp decay. To address this issue, we investigated the feasibility and implementation of applying fast filter bank(FFB) in channelization in this paper. We analyzed the butterfly structure of FFB similar with fast Fourier transform(FFT), in which prototype sub-filters are cascaded to achieve a low complexity. Hence, it is suitable for designing filter bank with steep transitional band and sharp decay in stop-band. Moreover, we designed a pipelined structure of FFB to achieve a balance between area and performance. Design example shows that FFB has lower computational complexity compared with the other filter banks.

Real-Time Frequency Estimation of Complex GMSK Signal of Green Communications Devices

Parameter estimation of signals of universal software radio peripheral （USRP） devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize the closed loop feedback algorithm where the receiver needs to send the received signal strength （RSS） values periodically to the beamforming node so as to take advantage of energy conservation, the frequency and phase of these signals should be estimated before smoothening by nonlinear filters. This article presents the estimation of the frequency offsets of a Gaussian minimum shift keying （GMSK） signal from N210 USRP devices in real time by using the Radix-2 fast Fourier transform （FFT） algorithm in GNURadio. For these green communications devices, most of the needed hardware parts have been software defined, thereby reducing the supposed energy consumption. The frequency offsets from reference carrier frequencies of 900 MHz and 2.4 GHz are less than 3 kHz each before the estimation, but the average offsets are 45 Hz and 100 Hz after the estimation, respectively. The high offset value experienced with the 2.4 GHz carrier was due to consistent interference from devices on that same frequency.

Researching on quadrature conversion structures For an UWB demonstrative receiver

Some structures of digital quadrature AD conversion for soft-ware-defined radio （SDR） systems are studied. Their performances and affections on the SDR systems are also analyzed. Two generalized quadrature AD schemes are proposed. In one of them, the AD sampling speed can be reduced by 2 times; and in the other both the output data rate of every channel and AD sampling speed can be lowered by paralleling the digital quadrature filtering structure. These structures can be also easily implemented into modules, and the polyphase filters can be flexibly realized by VHDL language based one chip of FPGA. To assess the proposed schemes, their applications to a particular ultra wideband （UWB） demonstrative receiver system are introduced. Some experimental results are also given. It is shown that the generalized quadrature AD structures are reliable and feasible for its module design, and performances are improved obviously for its better performance to price ratio.

Design of Fuze Antenna Beamformer Based on DSP

According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in C, and in order to reduce the operation time of DSP, the key part of the matrix operation was written in simple algorithm. The precise and speediness of DSP calculation results were analyzed through Matlab and the Profiling tools in Code Composer Studio （CCS）. The results show that the precise and the speediness both can satisfy the requirement for the fuze antennh beamforming.

NOVEL HIGH-SPEED FPGA-BASED FFT PROCESSOR

A novel architecture for computing the fast Fourier transform ( FFT ) on programmable devices is presented.To improve the system operation speed , a hybrid parallel FFT algorithm is used.Results indicate that the use of an 8×8parallel structure for realizing the 64-point FFT leads to a 8times higher processing speed compared with its counterparts employing other series of techniques.

Enhancements of SDR-Based FPGA System for V2X-VLC Communications

This pilot study focuses on a real measurements and enhancements of a software defined radio-based system for vehicle-to everything visible light communication(SDR-V2X-VLC).The presented system is based on a novel adaptive optimization of the feed-forward software defined equalization(FFSDE)methods of the least mean squares(LMS),normalized LMS(NLMS)and QR decomposition-based recursive least squares(QR-RLS)algorithms.Individual parameters of adaptive equalizations are adjusted in real-time to reach the best possible results.Experiments were carried out on a conventional LED Octavia III taillight drafted directly from production line and universal software radio peripherals(USRP)from National Instruments.The transmitting/receiving elements used multistate quadrature amplitude modulation(M-QAM)implemented in LabVIEW programming environment.Experimental results were verified based on bit error ratio(BER),error vector magnitude(EVM)and modulation error ratio(MER).Experimental results of the pilot study unambiguously confirmed the effectiveness of the proposed solution(longer effective communication range,higher immunity to interference,deployment of higher state QAM modulation formats,higher transmission speeds etc.),as the adaptive equalization significantly improved BER,MER and EVM parameters.The best results were achieved using the QR-RLS algorithm.The results measured on deployed QR-RLS algorithm had significantly better Eb/N0(improved by approx.20 dB)and BER values(difference by up to two orders of magnitude).

Measurement and analysis of Doppler shift for high-speed rail scenario

Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on the phase estimation of frequency correction channel(FCCH) which correctly reflects the time-varying characteristic of the channel with a testing system developed.The Doppler shift data under the high-speed condition is collected,processed,analyzed,and compared with the simulation results.The scientific laws of the Doppler shift distribution of radio channel under high-speed condition are obtained.These data and analysis are essential for the establishment of high-speed railway Doppler power spectrum model and the development of the key technology of antiDoppler shift.

Green Base Station Solutions and Technology

Base station power consumption is the biggest power issue concerning wireless networks. Saving power in base stations is therefore the primary focus in green wireless network development. This paper discusses green base stations in terms of system architecture, base station form, power saving technologies, and green technology applications. It explores effective ways of reducing power consumption in base stations.