Stabilized effects of L-S cement-mixed batter pile composite foundation for existed warm frozen soil subgrade

In permafrost regions with warm frozen soil,subgrade thaw-collapse phenomenon commonly occurs,facing thaw collapse problems of the existed frozen soil subgrade,thus it is difficult to use traditional methods such as active cooling and passive protection technology to stabilize the existed warm frozen soil subgrade.This study derives a novel stabilizer method,a long-short(L-S)cement-mixed batter pile composite foundation to stabilize the existed warm frozen soil subgrade.To solve the thawcollapse problems in warm frozen soil subgrade,high water content and large compressibility characteristics were compared between soft soil and warm frozen soils.Theoretical analysis of heat conduction and numerical simulation of finite element model were used to study the freeze–thaw process and evaluate the stabilized effects of the L-S cement-mixed batter piles on the warm frozen soil foundation of the Qinghai-Tibet Highway.Furthermore,the thaw process and mechanical properties of foundation and piles were analyzed by introducing the hydration heat factor in the thermodynamic control equation.The results indicate that the thawing displacement of the existed warm frozen soil subgrade was reduced owing to the“support”and“grasp”effects of the L-S cement-mixed batter piles on the surrounding soil.The composite ground formed by strengthening the warm frozen ground with batter piles could considerably improve the bearing capacity of the existed warm frozen ground,effectively restrain the deformation of the upper embankment,and improve the strength of the ground.The analysis can provide method for the construction design of cement mixing batter pile foundation in cold regions.

Coupling effect of pond ash and polypropylene fiber on strength and durability of expansive soil subgrades:An integrated experimental and machine learning approach

This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted as reinforcement against tensile cracking.The sustainable use of PA and PP fiber are demonstrated by performing mechanical(i.e.unconfined compressive strength,split tensile strength and ultrasonic pulse velocity),chemical(pH value,electrical conductivity and calcite content),and microstructural analyses before and after 2nd,4th,6th,8th and 10th freezing-thawing(F-T)cycles.Three curing methods with 7 d,14 d and 28 d curing periods are considered to reinforce the 5%,10%,15%and 20%PA-stabilized expansive soil with 0.25%,0.5%and 1%PP fiber.In order to develop predictive models for mechanical and durability parameters,the experimental data are processed utilizing artificial neural network(ANN),in association with the leave-one-out cross-validation(LOOCV)as a resampling method and three different activation functions.The mechanical and durability properties of the PA-stabilized expansive soil subgrades are increased with PP fiber reinforcement.The results of ANN modeling predict the mechanical properties perfectly,and the correlation coefficient(R)approaches up to 0.96.

Design method of pile-slab structure roadbed of ballastless track on soil subgrade

Pile-slab structure roadbed is a new form of ballastless track for high speed railway. Due to lack of corresponding design code, based on the analysis of its structure characteristics and application requirements, it is proposed to carry out load effect combination according to ultimate limit state and serviceability limit state, and the most unfavorable combination of each state is chosen to carry through design calculation for pile-slab structure. Space model of pile-slab structure can be simplified as a plane flame model, by using the orthogonal test method, and the design parameter of pile-slab structure is optimized. Moreover, based on the engineering background of Suining-Chongqing high-speed railway, the dynamic deformation characteristics of pile-slab structure roadbed are further researched by carrying on the indoor dynamic model test. The test results show that the settlement after construction of subgrade satisfies the requirement of settlement control to build ballastless track on soil subgrade for high-speed railway. Slab structure plays the role of arch shell as load is transmitted from slab to pile, and the vertical dynamic stress of subgrade soil is approximately of ＂K＂ form distribution with the depth. The distribution of pile stress is closely related to soil characteristics, which has an upset triangle shape where the large dynamic stress is at the top. Pile compared with soil shares most dynamic stress. Pile structure expands the depth of the dynamic response of subgrade has limited effect on dynamic response. These results can provide subgrade. and improves the stress of subgrade soil, and the speed of train scientific basis for pile-slab structure roadbed used on soil

THE AXISYMMETRIC MIXED BOUNDARY-VALUE PROBLEM OF THE VERTICAL VIBRATION OF A RIGID FOUNDATIONON SATURATED LAYERED SOIL SUBGRADE

Based on the theory of elastic wave propagation in saturated soil subgrade established by the author of this paper, the axisymmetric vertical vibration of a rigid circular foundation resting on partially saturated soil subgrade which is composed of a dry elastic layer and it saturated substratum is studied. The analysis relied on the use of integral transform techniques and a pair of dual integral equations governing the vertical vibration of the rigid foundation is listed under the consideration of mixed boundary-value condition. The results tire reduced to the case for saturated half-space. The set of dual integral equations are reduced to a Fredholm integral equation of the second kind and solved by numerical procedures, Numerical examples are given at the end of the paper and plots of the dynamic compliance coefficient C-b versus the dimensionless frequency a(0) are presented.

Soil Subgrade’s Characterization and Classification of Thies (Senegal, West Africa) on a Radius of 2.5 Kilometers along Five Roads

This article explains the results of a study conducted on the characterizations of subgrade soils in the region of Thies. The road platforms are mainly composed of a background soil, which is generally overlapped by a surface layer that plays two roles. Firstly, it protects the soil structure, ensures the leveling, and facilitates the movement of vehicles. Secondly, it brings harmony in the mechanistic characteristics of the materials that compose the soil while improving the long-term life force. The methodology consisted in taking samples of subgrade soil along the roads all over the region of Thies in a 5 km diameter span. The identification tests allowed the Thies-Tivaoune, Thies-Khombole and Thies-Noto axes are characterized by tight sands, poorly graded size. While Thies Pout-axis is characteristic of severe solid particle size and spread well graded and serious to spread and well graded particle size. Finally the Thies-Montrolland axis is characterized by severe to very tight particle size and graduated to spread and serious and well graded particle size. The specific gravity values found Proctor test shows the presence of sand, sandy laterite and laterite. In the target area, polished soils of the A-3 type according to the AASHTO classification system are the most represented with 60%, followed by the A-2-6 type 25%, and the A-2-4 type with 9%, which are typical of gravel, clay, and silty sands. Soils of the A-1-b type (2%) typical of roc fragments, sands and clay are also represented. Polished sands of the A-3 type have a better efficiency on road infrastructures than other types of soil listed above. Finally, we’ve also noted the presence of soils of the A-2-7 and A-4 types with the low percentage of 2%. Subgrade soils of class S4 are the most represented with 58%, followed by those of class S5 with 42%. Samples of the Thies-Montrolland road have a claylike plasticity (CL or CH group), while those of the Thies-Pout road belong to the ML or OL and CL or OL groups with a tendency mostly directed to the CL or OL group. All these results confirm the very nature of soils on the two roads and put the light on the presence of lateritic materials with certain plasticity.

Rapid testing and prediction of soil–water characteristic curve of subgrade soils considering stress state and degree of compaction

The subgrade soil is generally in saturated or unsaturated condition. To analyze complex thermo-hydro-mechanical-chemical (THMC) behaviors of subgrade, it is essential to determine the soil–water characteristic curve (SWCC) that represents the relationship between matric suction and moisture content. In this study, a full-automatic rapid stress-dependent SWCC pressure-plate extractor was developed. Then, the influences of overburden stress and degree of compaction on the SWCC of subgrade soil such as high liquid limit silt (MH) and low liquid limit clay (CL) were analyzed. Accordingly, a new model taking into account the influences of overburden stress and degree of compaction based on the well-known Van Genuchten (VG) SWCC fitting model was presented and validated. The results show that with the increase of the degree of compaction and overburden stress, the saturated moisture content of subgrade soil decreases, while the air-entry value increases and the transition section curve becomes flat. The influences of the degree of compaction and overburden stress on the SWCC of MH is greater than that of CL. Meanwhile, there was a satisfactory agreement between the prediction and measurement, indicating a good performance of the new model for predicting the SWCC.

A bibliometric review on stability and reinforcement of special soil subgrade based on CiteSpace

To establish a scientific foundation for further studies and to better understand special soil subgrade research foci and development directions,a visualization analysis of 2601 and 2102 article from 2005 to 2019 was conducted based on the China National Knowledge Infrastructure(CNKI)and Web of Science(WOS)core databases.Time distribution feature,country/region distribution,organization distribution,main source journal distribution,research hotspots and frontier of literature are all analyzed,and the knowledge domain maps are plotted with CiteSpace visualization software.It was found that from 2005 to 2019,the analysis uncovered that China,USA,Australia,Iran and India as the top five most productive countries publishing about subgrade stability and reinforcement with special soil,but results from the USA are the most influential ones in this field,the national/regional quantitative analysis showed that the density of international co-occurrence network is higher than that of China,which indicated that the international research on the subgrade stability and reinforcement with special soil is relatively concentrated,and the CNKI research was focused on dynamic compaction methods,adding CFG pile and geogrid to strengthen the soil subgrade and the WOS researches were focused on the use of geosynthetics to strengthen the subgrade.The current researches of CNKI were revealed to be the compression and deformation characteristics of lightweight foam soil fill subgrade whereas soft soil subgrade problems and numerical analysis methods were the current research foci in the WOS.

Prediction of resilient modulus for subgrade soils based on ANN approach

The resilient modulus(MR)of subgrade soils is usually used to characterize the stiffness of subgrade and is a crucial parameter in pavement design.In order to determine the resilient modulus of compacted subgrade soils quickly and accurately,an optimized artificial neural network(ANN)approach based on the multi-population genetic algorithm(MPGA)was proposed in this study.The MPGA overcomes the problems of the traditional ANN such as low efficiency,local optimum and over-fitting.The developed optimized ANN method consists of ten input variables,twenty-one hidden neurons,and one output variable.The physical properties(liquid limit,plastic limit,plasticity index,0.075 mm passing percentage,maximum dry density,optimum moisture content),state variables(degree of compaction,moisture content)and stress variables(confining pressure,deviatoric stress)of subgrade soils were selected as input variables.The MR was directly used as the output variable.Then,adopting a large amount of experimental data from existing literature,the developed optimized ANN method was compared with the existing representative estimation methods.The results show that the developed optimized ANN method has the advantages of fast speed,strong generalization ability and good accuracy in MR estimation.

Law of Water Content Change in Subgrade Soil Under Action of Dry-Wet Cycle

Due to the influence of the groundwater level,the internal humidity of the subgrade changes and the stability of the subgrade is affected. The main purpose of this paper is to obtain a reliable model of subgrade soil water content variation under the action of dry-wet cycle through sensor readings. Thus,an indoor soil column model test system is designed,and the readings of the sensors are used to determine the changing law of moisture field in the subgrade soil. The sensor readings indicate that the water content gradually decreases along the height of the soil column,and the water in the upper part of the soil column continuously loses,while the water in the lower part migrates upward to supplement. With the increase of dry-wet cycle index,the water holding capacity of soil decreases,and the soil surface gradually cracks and tends to rupture.

A Practical Model for Deformation Prediction of Highway Subgrade Soils

This paper reports a practical constitutive relation for highway subgrade soils. The proposed model is derived based on the laboratory repeated load testing of four subgrade soils. Statistical parameters generally used in the power model of subgrade permanent strain are expanded into material constants with engineering significance. The constitutional relation reported in this paper can be used in the mechanistic based pavement design of highway flexible pavements and railroad tracks.

Study on the subgrade deformation under high-speed train loading and water–soil interaction

It is important to study the subgrade characteristics of high-speed railways in consideration of the water–soil coupling dynamic problem,especially when high-speed trains operate in rainy regions.This study develops a nonlinear water–soil interaction dynamic model of slab track coupling with subgrade under high-speed train loading based on vehicle–track coupling dynamics.By using this model,the basic dynamic characteristics,including water–soil interaction and without water induced by the high-speed train loading,are studied.The main factors-the permeability coefficien and the porosity-influencin the subgrade deformation are investigated.The developed model can characterize the soil dynamic behaviour more realistically,especially when considering the influenc of water-rich soil.

Resilient modulus prediction of soft low-plasticity Piedmont residual soil using dynamic cone penetrometer

Dynamic cone penetrometer（DCP） has been used for decades to estimate the shear strength and stiffness properties of the subgrade soils. There are several empirical correlations in the literature to predict the resilient modulus values at only a specific stress state from DCP data, corresponding to the predefined thicknesses of pavement layers（a 50 mm asphalt wearing course, a 100 mm asphalt binder course and a200 mm aggregate base course）. In this study, field-measured DCP data were utilized to estimate the resilient modulus of low-plasticity subgrade Piedmont residual soil. Piedmont residual soils are in-place weathered soils from igneous and metamorphic rocks, as opposed to transported or compacted soils.Hence the existing empirical correlations might not be applicable for these soils. An experimental program was conducted incorporating field DCP and laboratory resilient modulus tests on "undisturbed" soil specimens. The DCP tests were carried out at various locations in four test sections to evaluate subgrade stiffness variation laterally and with depth. Laboratory resilient modulus test results were analyzed in the context of the mechanistic-empirical pavement design guide（MEPDG） recommended universal constitutive model. A new approach for predicting the resilient modulus from DCP by estimating MEPDG constitutive model coefficients（k;,k;and k;） was developed through statistical analyses. The new model is capable of not only taking into account the in situ soil condition on the basis of field measurements,but also representing the resilient modulus at any stress state which addresses a limitation with existing empirical DCP models and its applicability for a specific case. Validation of the model is demonstrated by using data that were not used for model development, as well as data reported in the literature.

Investigation on the properties of compacted silty clay subjected to electro-osmosis using bender element

The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has shown promise as a technology for controlling subgrade moisture,but significant heterogeneity has also been observed in treated soil.This study investigates the impact of electro-osmosis on soil stiffness through a series of bender element tests of compacted clay.The effects of dry density and supply voltage on the performance of electroosmosis treatment and the layered structure and anisotropy of the soil were analyzed.The results show that electro-osmosis treatment increased the shear wave velocity of the soil by 140% compared to untreated saturated soil and by 70% compared to soil with optimum water content.It has also been found that layered compaction of soil resulted in a layered structure,with electro-osmosis having a more prominent impact on soil near the cathode,resulting in a more pronounced layered structure.Besides,electro-osmosis was found to enhance soil anisotropy,particularly near the anode.Increasing the dry density and voltage levels can help improve soil uniformity.These findings provide insights into the potential use of electro-osmosis in improving soil stiffness,which could benefit various engineering applications.

A Vibration-Based Method for the Measurement of Subgrade Soil Scaling Factor

The subgrade soil scaling factor （SSSF） shows the basic properties of soil such as stiffness, gravimetry, density, and particle distribution, which are essential for disaster prediction and geotechnical engineering activities. In this paper, methods used for soil properties analysis are firstly summarized, and then a fiber Bragg grating （FBG） sensing technology is introduced. In order to acquire the properties and mechanical characteristics of soil accurately, a vibration-based method is presented, and an experiment for judging the properties of soil is conducted. As for the experiment, an FBG sensor is adhered to the upside of the vibration rod to measure its fundamental frequency. The rod vibrates freely at different-depth level of soil, and the changed data of wavelength from the FBG sensor are carefully collected. The Winkler spring model is used to analyze the relationship between the fundamental frequency and stiffness of soil. The results of this experiment suggest that data collected from FBG sensor can reflect vibration situation clearly and quantitatively. Thus the SSSF value can be calculated from the frequency-stiffness equation. The experimental results are almost identical with the theoretical derivation results. This confirms that the method presented in the paper can determine the SSSF effectively.

Accounting for natural-climatic conditions in the design of roads in western Siberia

The paper proposes a methodological scheme that thoroughly accounts for natural-climatic conditions which can impair the stability and longevity of transport facilities （roadways）, to ensure the best possible quality of the initial road design. Factors determining the formation of water-heating mode subgrade soils are allocated, and an information database for mathematical modeling of geocomplexes is shown. Values of strength and deformability of clay soils are calculated within the limits of the defined, homogeneous road districts in Western Siberia to provide the required level of reliability of design solutions.