Analysis for Effects of Temperature Rise of PV Modules upon Driving Distance of Vehicle Integrated Photovoltaic Electric Vehicles

The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO2 emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.

PV Solar Yield Applicable Simulator Based on Free Irradiance Data Source:Applied Comprehensive Tool for Solar Engineers

Accurate PV system simulators are implemented with expensive software platforms using paid irradiance data.The main purpose of this paper is to develop and validate a PV system simulator,beginning with a solar cell parameter extraction model,then test and validate long-termIrradiance data using free online source(Typical Meteorological Year TMY in(PVGIS)European website),and finally building full solar generator simulator to run in working real conditions.Comparing results with Accurate Paid PV simulators(which use theMuneer model)showed good accuracy of the proposed simulator.Work flow starts with the Irradiance model’s data processing,then solar cell 5 parameters model data processing(to extract cell parameters),and finally full system simulator.MATLAB coding programs in real working conditions are used for simulation.Results of solar cell parameter extraction show 99.6%to 99.99%matching with data sheet and cell performance under standard test conditions.Systemmodel simulation output shows 8%less yearly generated energy compared to the PVGIS 2022 long-term simulation(hourly basis(one-year time)).This is due to incident energy variations(between the years 2016 and 2022)of 4.02%.The novelty of the algorithm is the methodology,as it tests irradiance data on an hourly basis and validates results for a whole continuous year.Also,the 5-parameter solar cell model is used to be validated in long term analysis,not only STC conditions and could be applied on any PV solar cell.The algorithm and block diagramused are scalable,modular,and interchangeable with similarmodels to be tested.This simulator could test severalmethods andmodels in solar pv technology.

Solar Photovoltaics Development in Nigeria: Drivers, Barriers, and Policies

Energy access is vital to a nation’s economic growth and its populace’s social well-being. Still, there is a lack of adequate energy in Nigeria, negatively affecting the country’s socio-economic development. Due to the inadequate energy supply, some manufacturing companies shut their operations, and most Nigerians now use backup generators (BUGs) with their attendant health hazards, environmental pollution, and global warming. The need for energy access and a sustainable energy supply through renewable energy (RE) resources necessitates adopting solar photovoltaics (PV) in Nigeria. Studies on Nigeria’s energy accessibility and sustainability are generally on RE development and a few on solar PV applications. This research covers the need for an in-depth analysis of the growth of solar PV in Nigeria, and the research question is: What factors promote or limit the adoption of solar photovoltaics in Nigeria? A method of Systematic Literature Review (SLR) and Thematic Analysis (TA) is employed for the analysis. The research findings are divided into drivers, barriers, and policies. Some identified factors promoting the adoption of solar PV are energy poverty and the urgency to improve electricity supply, the ease of its operation and maintenance, and the Nigerian government’s commitment to clean electricity supply with policy initiatives and increased awareness of solar PV applications. Conversely, some noticed factors mitigating the growth of solar PV are poor tariff systems, dual subsidies of electricity and petroleum, and lack of finance and economic incentives.

A Techno-Economical Characterization of Solar PV Power Generation in Rwanda:The Role of Subsidies and Incentives

Standalone Solar PV systems have been vital in the improvement of access to energy in many countries.However,given the large cost of solar PV plants’components,in developing countries,there is a dear need for such components to be subsidised and incentivised for the consumers to afford the produced energy.Moreover,there is a need for optimal sizing of the solar PV plants taking into account the solar information,energy requirement for various activities,and economic conditions in the off-grid regions in Rwanda.This study aims to develop optimally sized solar PV plants suited to rural communities in Rwanda.Likewise,it aims at characterizing the impacts of subsidies and incentives on the profitability and affordability of solar PV plants’energy in Rwanda.In the study,we have developed a model on basis of which the plant power(peak power)and costs of energy can be predicted given the load requirements using PVSyst.The model was validated using data corrected at eight different sites.Our generalized predictive model’s results matched the results obtained using field measurement data as inputs.The models have been able to replicate with a by degree of accuracy the peak powers and the plants’costs for different loads and were used to evaluate the economic viability of solar PV plants in Rwanda.It was found that with incentives and subsidies of 20%,the solar PV systems’costs,the Levelised Cost of Energy would drop from a maximum of 0.098 Euro to a minimum of 0.072 Euro,the payback period was reduced from a maximum of 7.5 years to a minimum of 6.0 years while the return on investments was seen to vary between 425.72 and 615.32 per cent over the plants’lifetime of 25 years.Overall our findings underscore the importance of government subsidies and incentives for solar PV energy generation projects to be significantly profitable.

Progress of semitransparent emerging photovoltaics for building integrated applications

With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.

Electro-Optical Model of Soiling Effects on Photovoltaic Panels and Performance Implications

In this paper,a detailed model of a photovoltaic(PV)panel is used to study the accumulation of dust on solar panels.The presence of dust diminishes the incident light intensity penetrating the panel’s cover glass,as it increases the reflection of light by particles.This phenomenon,commonly known as the“soiling effect”,presents a significant challenge to PV systems on a global scale.Two basic models of the equivalent circuits of a solar cell can be found,namely the single-diode model and the two-diode models.The limitation of efficiency data in manufacturers’datasheets has encouraged us to develop an equivalent electrical model that is efficient under dust conditions,integrated with optical transmittance considerations to investigate the soiling effect.The proposed approach is based on the use of experimental current-voltage(I-V)characteristics with simulated data using MATLAB/Simulink.Our research outcomes underscores the feasibility of accurately quantifying the reduction in energy production resulting from soiling by assessing the optical transmittance of accumulated dust on the surface of PV glass.

Recent advances in two-dimensional photovoltaic devices

Two-dimensional(2D)materials have attracted tremendous interest in view of the outstanding optoelectronic properties,showing new possibilities for future photovoltaic devices toward high performance,high specific power and flexibility.In recent years,substantial works have focused on 2D photovoltaic devices,and great progress has been achieved.Here,we present the review of recent advances in 2D photovoltaic devices,focusing on 2D-material-based Schottky junctions,homojunctions,2D−2D heterojunctions,2D−3D heterojunctions,and bulk photovoltaic effect devices.Furthermore,advanced strategies for improving the photovoltaic performances are demonstrated in detail.Finally,conclusions and outlooks are delivered,providing a guideline for the further development of 2D photovoltaic devices.

Synergetic optimization operation method for distribution network based on SOP and PV

The integration of distributed generation brings in new challenges for the operation of distribution networks,including out-of-limit voltage and power flow control.Soft open points(SOP)are new power electronic devices that can flexibly control active and reactive power flows.With the exception of active power output,photovoltaic(PV)devices can provide reactive power compensation through an inverter.Thus,a synergetic optimization operation method for SOP and PV in a distribution network is proposed.A synergetic optimization model was developed.The voltage deviation,network loss,and ratio of photovoltaic abandonment were selected as the objective functions.The PV model was improved by considering the three reactive power output modes of the PV inverter.Both the load fluctuation and loss of the SOP were considered.Three multi-objective optimization algorithms were used,and a compromise optimal solution was calculated.Case studies were conducted using an IEEE 33-node system.The simulation results indicated that the SOP and PVs complemented each other in terms of active power transmission and reactive power compensation.Synergetic optimization improves power control capability and flexibility,providing better power quality and PV consumption rate.

Smart Monitoring of Solar Photovoltaic Panels by the Approach of Machine Learning

The exploitation of renewable energy has become a pressing task due to climate change and the recent energy crisis caused by regional conflicts.This has further accelerated the rapid development of the global photovoltaic(PV)market,thereby making the management and maintenance of solar photovoltaic(SPV)panels a new area of business as neglecting it may lead to significant financial losses and failure to combat climate change and the energy crisis.SPV panels face many risks that may degrade their power generation performance,damage their structures,or even cause the complete loss of their power generation capacity during their long service life.It is hoped that these problems can be identified and resolved as soon as possible.However,this is a challenging task as a solar power plant(SPP)may contain hundreds even thousands of SPV panels.To provide a potential solution for this issue,a smart drone-based SPV panel condition monitoring(CM)technique has been studied in this paper.In the study,the U-Net neural network(UNNN),which is ideal for undertaking image segmentation tasks and good at handling small sample size problem,is adopted to automatically create mask images from the collected true color thermal infrared images.The support vector machine(SVM),which performs very well in highdimensional feature spaces and is therefore good at image recognition,is employed to classifying the mask images generated by the UNNN.The research result has shown that with the aid of the UNNN and SVM,the thermal infrared images that are remotely collected by drones from SPPs can be automatically and effectively processed,analyzed,and classified with reasonable accuracy(over 80%).Particularly,the mask images produced by the trained UNNN,which contain less interference items than true color thermal infrared images,significantly benefit the assessing accuracy of the health state of SPV panels.It is anticipated that the technical approach presented in this paper will serve as an inspiration for the exploration of more advanced and dependable smart asset management techniques within the solar power industry.

Performance Assessment of a Real PV System Connected to a Low-Voltage Grid

The generation of photovoltaic(PV)solar energy is increasing continuously because it is renewable,unlimited,and clean energy.In the past,generation systems depended on non-renewable sources such as oil,coal,and gas.Therefore,this paper assesses the performance of a 51 kW PV solar power plant connected to a low-voltage grid to feed an administrative building in the 6th of October City,Egypt.The performance analysis of the considered grid-connected PV system is carried out using power system simulator for Engineering(PSS/E)software.Where the PSS/E program,monitors and uses the power analyzer that displays the parameters and measures some parameters such as current,voltage,total power,power factor,frequency,and current and voltage harmonics,the used inverter from the type of grid inverter for the considered system.The results conclude that when the maximum solar radiation is reached,the maximum current can be obtained from the solar panels,thus obtaining the maximum power and power factor.Decreasing total voltage harmonic distortion,a current harmonic distortion within permissible limits using active harmonic distortion because this type is fast in processing up to 300 microseconds.The connection between solar stations and the national grid makes the system more efficient.

Probabilistic Global Maximum Power Point Tracking Algorithm for Continuously Varying Partial Shading Conditions on Autonomous PV Systems

A photovoltaic (PV) string with multiple modules with bypass diodes frequently deployed on a variety of autonomous PV systems may present multiple power peaks under uneven shading. For optimal solar harvesting, there is a need for a control schema to force the PV string to operate at global maximum power point (GMPP). While a lot of tracking methods have been proposed in the literature, they are usually complex and do not fully take advantage of the available characteristics of the PV array. This work highlights how the voltage at operating point and the forward voltage of the bypass diode are considered to design a global maximum power point tracking (GMPPT) algorithm with a very limited global search phase called Fast GMPPT. This algorithm successfully tracks GMPP between 94% and 98% of the time under a theoretical evaluation. It is then compared against Perturb and Observe, Deterministic Particle Swarm Optimization, and Grey Wolf Optimization under a sequence of irradiance steps as well as a power-over-voltage characteristics profile that mimics the electrical characteristics of a PV string under varying partial shading conditions. Overall, the simulation with the sequence of irradiance steps shows that while Fast GMPPT does not have the best convergence time, it has an excellent convergence rate as well as causes the least amount of power loss during the global search phase. Experimental test under varying partial shading conditions shows that while the GMPPT proposal is simple and lightweight, it is very performant under a wide range of dynamically varying partial shading conditions and boasts the best energy efficiency (94.74%) out of the 4 tested algorithms.

Study on Image Recognition Algorithm for Residual Snow and Ice on Photovoltaic Modules

The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable of accurately assessing the extent of snow and ice coverage on PV modules.To address this issue,the article proposes an innovative ice and snow recognition algorithm that effectively segments the ice and snow areas within the collected images.Furthermore,the algorithm incorporates an analysis of the morphological characteristics of ice and snow coverage on PV modules,allowing for the establishment of a residual ice and snow recognition process.This process utilizes both the external ellipse method and the pixel statistical method to refine the identification process.The effectiveness of the proposed algorithm is validated through extensive testing with isolated and continuous snow area pictures.The results demonstrate the algorithm’s accuracy and reliability in identifying and quantifying residual snow and ice on PV modules.In conclusion,this research presents a valuable method for accurately detecting and quantifying snow and ice coverage on PV modules.This breakthrough is of utmost significance for PV power plants,as it enables predictions of power generation efficiency and facilitates efficient PV maintenance during the challenging winter conditions characterized by snow and ice.By proactively managing snow and ice coverage,PV power plants can optimize energy production and minimize downtime,ensuring a sustainable and reliable renewable energy supply.

Comprehensive Examination of Solar Panel Design: A Focus on Thermal Dynamics

In the 21st century, the deployment of ground-based Solar Photovoltaic (PV) Modules has seen exponential growth, driven by increasing demands for green, clean, and renewable energy sources. However, their usage is constrained by certain limitations. Notably, the efficiency of solar PV modules on the ground peaks at a maximum of 25%, and there are concerns regarding their long-term reliability, with an expected lifespan of approximately 25 years without failures. This study focuses on analyzing the thermal efficiency of PV Modules. We have investigated the temperature profile of PV Modules under varying environmental conditions, such as air velocity and ambient temperature, utilizing Computational Fluid Dynamics (CFD). This analysis is crucial as the efficiency of PV Modules is significantly impacted by changes in the temperature differential relative to the environment. Furthermore, the study highlights the effect of airflow over solar panels on their temperature. It is found that a decrease in the temperature of the PV Module increases Open Circuit Voltage, underlining the importance of thermal management in optimizing solar panel performance.

太阳能光伏光热PV/T组件在建筑设计中的应用

建筑领域“双碳”目标的提出,使得降低建筑能耗成为目前亟需解决的问题。可再生能源同建筑领域的有机结合被认为是解决建筑能耗的重要环节。通过对太阳能光伏光热技术的发展进行总结,研究太阳能光伏光热技术在建筑领域中的设计方法,提出了对未来光伏光热建筑一体化的设计思考,为以后太阳能光伏光热PV/T技术产业的发展提供参考。

Modeling the Impact of Desert Aerosols on the Solar Radiation of a Mini Solar Central Photovoltaic (PV)

This work focuses on modeling the impact of desert aerosols on a mini central solar photovoltaic (PV). Our studied physical model is comparable to a multilayer. We have described and discretized the mathematical equations which govern the physical model. Also, we analyzed the influence of the parameters τa and X on the solar radiation received at the surface of solar PV modules. The results of the study taken from Figures 6(a)-(d) representing the variations of the global solar radiation on the solstices and equinoxes as well as the 21 of the months of the year days understood show that: if τa = 0 and X = 0, IC = 67.87%;if τa = 0.5 and X = 0.5, IC = 21%;if τa = 0.8 and X = 0.8, IC = 12% and if τa = 1.5 and X = 1.5 then IC = 4%. These results show that desert aerosols significantly influence the global solar radiation received. Unfortunately, this influence lowers the productivity of the central solar PV in general.

Tilt Angle Optimality Criteria for Stand Alone PV Systems

The conventional approach to optimizing tilt angles for fixed solar panels aims to maximize energy generation over the entire year. However, in the context of a supply controlled electric grid, where solar energy availability varies, this criterion may not be optimal. This study explores two alternative optimization criteria focused on maximizing baseload supply potential and minimizing required storage capacity to address seasonality in energy generation. The optimal tilt angles determined for these criteria differed significantly from the standard approach. This research highlights additional factors crucial for designing solar power systems beyond gross energy generation, essential for the global transition towards a fully renewable energy-based electric grid in the future.

Impact of Climatic Parameters on the Performance of Solar Photovoltaic (PV) Module in Niamey

The sensitivity of mono-crystalline solar PV module towards dust accumulation, ambient temperature, relative humidity, and cloud cover is investigated from May to August 2015 for Niamey’s environment. Two solar modules with the same characteristics have been used to carry out the impacts of the dust on the solar PV module. One of the modules is being cleaned every morning and the second one was used for monitoring the effect of dust accumulation onto the surface of the unclean module for May and June. The ambient temperature around the solar PV module was recorded at the same time with the output voltage and the output current to assess the impacts of ambient temperature on the PV conversion efficiency. In addition to these field test measurements, the solar radiation data measured in National Center of Solar Energy (CNES) of Niamey were also used. Also the relative humidity for the study area data obtained NASA power agro-climatology website was used. Results show that the dust accumulation has the greatest impact on the performance of the PV module followed by temperature, relative humidity and cloud cover. Exposing the module in 23 days has reduced the energy output by 15.29%. The power output and the conversion efficiency of the PV module have dropped by 2.6% and 0.49% respectively. The relative humidity also has reduced the energy output by 4.3 Wh/m2/day.

Experimental Investigation of the Stability of the Performance Characteristics of a Photovoltaic Module in the Face of Environmental and Meteorological Factors

The explosive technological improvement of photovoltaic systems as well as the necessity of populations to come to less expensive energy sources, that have led to an implosion at the level of solar panel manufacturers. This causes a large flow of these equipments to developing countries where the need is high, without any quality control. That conducted an experimental investigation on the performance characteristics of a 250 wp monocrystalline silicon photovoltaic module in other to check the verification and quality control. Most of these PV panels which often have missing informations are manufactured and tested in places that are inadequate for our environmental and meteorological conditions. Also, their influences on the stability of internal parameters were evaluated in order to optimize their performance. The results obtained at maximum illumination (1000 w/m2) confirmed those produced by the manufacturer. The analysis of these characteristics showed that the illumination and the temperature (meteorological factors) influenced at most the stability of the internal characteristics of the module in the sense that the maximum power increased very rapidly beyond 750 w/m2 but a degradation of performance was accentuated for a temperature of the solar cells exceeding 50°C. The degradation coefficients were evaluated at -0.0864 V/°C for the voltage and at -1.6248 w/°C for the power. The 10° inclination angle of the solar panel proved to be ideal for optimizing overall efficiency in practical situations.

Analysis of Current Research and Future Development Trends of Applying Solar Energy in Street Lighting

In the context of promoting green energy transition and addressing climate change globally,solar energy,as a clean and renewable energy source,has gradually become a hot topic for research.Solar streetlight systems realize energy self-sufficiency and environment-friendly lighting by integrating photovoltaic power generation technology and efficient LED lighting technology.By comprehensively analyzing the current status of the application of solar streetlights at home and abroad,this paper discusses its technical advantages,market penetration,and challenges in its development.In terms of technical characteristics,this paper focuses on analyzing the key technologies such as energy conversion efficiency and intelligent control systems of solar streetlights.

Performance Assessment of Motorized Solar Photovoltaic Louvers System Using PVSYST Software

In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar energy exploitation through building façades was addressed through motorized solar photovoltaic louvers(MPVL).On the other hand,proponents exalted the benefits of MPVL overlooking the typical analyses.In this communication,we attempted to perform a thorough industrial system evaluation of the MPVL.This communication presents a methodology to validate the industrial claims about MPVL devices and their economic efficiency and the insight on how geographical location influences their utilization and augment their potential benefits.This task is carried out by evaluating the extent of solar energy that can be harvested using solar photovoltaic system(PVSYST)software and investigating whether existing product claims are associated with MPVL are feasible in different locations.The performance and operational losses(temperature,internal network,power electronics)were evaluated.To design and assess the performance of different configurations based on the geographical analogy,simulation tools were successfully carried out based on different topographical locations.Based on these findings,various factors affect the employment of MPVL such as geographical and weather conditions,solar irradiation,and installation efficiency.tt is assumed that we successfully shed light and provided insights into the complexity associated with MPVL.