Comparative Study of the Types of Photovoltaic Panels Used in Solar Pumping Systems in Dry Tropical Zones: Case of Adamawa Region in Cameroon

In the dry tropical zone where access to water is increasingly difficult for populations, solar pumping units are increasingly installed to provide water to population. In the local market, there are essentially two types of solar panels, namely monocrystalline and polycrystalline. However, the part of the local market is more dominated by the polycrystalline panel. In this work, comparative studies are carried out in order to characterize the two types of solar panels with regard to local constraints. Tests were carried out over the course of the sun to establish the performance of each type. The panels used have the same electrical characteristics and are connected to loads with same characteristics. Under the set operating conditions, the monocrystalline panel presents more performance than the polycrystalline panel. Although the local market is dominated by the polycrystalline panel, dust deposition tests on the surface of the panels show that the performance of the polycrystalline panel is more affected compared to the performance of the monocrystalline panel.

Adoption of Solar Pumping Systems by Vegetable Farmers in Niayes Agro-Ecological Zone of Senegal: Adoption as a Sequential Process

This article examines the determinants of the adoption of solar pumping systems (PV) by vegetable farmers in the Niayes area of Senegal. To measure the determinants, we used a sequential logit model to translate the adoption process from becoming aware of solar pumping systems to testing them, i.e. using them at least once, and then continuing to use them over time. The results show that the main variables affecting awareness of the use of solar pumping systems (PV) are age, marital status, experience, access to credit, the farmer’s knowledge of climate change, the farmer’s origin in the Thiès region and length of time in the Niayes area. The first use of PVs is influenced by factors such as the size of the plot, the distance of the plot from the main road or from the market. Finally, the decision to adopt or continue use is influenced by gender, experience, household size and access to credit. Surprisingly, access to credit does not affect the first use of solar pumping systems, but plays a key role in their continued use.

Comprehensive Study,Design and Economic Feasibility Analysis of Solar PV Powered Water Pumping System

The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,longer operating life,highly reliable and free from production of greenhouse gases.In this paper we analyzed the different topologies of DC–DC converter in terms of their operating region of MPPT,quality of input and output currents.We discussed the MPPT algorithms to address partial shading effects in SPV array,present state of the technology,factors affecting the performance of the system,efficiency improvements and identified the research gaps.Also,the economic feasibility analysis has been done for the real time scenario using the Homer Pro software.The estimation of total dynamic head and horse power calculation has been done to decide the total load capacity.The economic analysis results such as cumulative cash flow over project lifetime of 25 years are presented.It is observed that the capital investment requirement is$7,425 for installing Fronius PV system that has a nominal capacity of 2.47 kW and annualized savings will be$134.93.In the long-term perspective,the return on investment is−2.18%as per the present tariff plan.

Optimised Design and Analysis of Solar Water Pumping Systems for Pakistani Conditions

This paper is about the optimized design and analysis of two solar water pumping systems in which one of the systems is designed with a battery bank and other with a cylindrical water tank for a selected site in Pakistan. The design, sizing, cost analysis and steady state analysis of the proposed systems were done in HOMER and dynamic analysis of the designed system with battery bank was performed in MATLAB/Simulink. The simulations performed in HOMER involved proper mapping of the loads which helped to evaluate the PV panel requirement, inverter rating, batteries (in case of battery based solution), modeling of water tank as a deferrable load (in case of solution based of water tank) and detailed cost analysis for a life time of 25 years. To verify the design of the solar water pumping system with battery bank, a simulation in MATLAB/Simulink for study of dynamic behavior of the overall system was performed which involved mathematical modeling of a PV panel, buckboost converter, inverter, battery bank and motor/pump, a perturb and observe maximum power point tracking algorithm based control system. Analysis was conducted based on the economic results that indicate designed solar water pumping system with water tank would be a cheaper solution as compared to solar water pumping system with a battery bank. This work can be taken as a case study for the understanding and optimized designs of solar water pumping system with battery bank and with cylindrical tank in Pakistani conditions.

Exergo-Environmental Study of a Recent Organic Solar Hybrid Heat Pump

A hybrid heat pump(compression/absorption)with an integrated thermal photovoltaic unit is studied.The considered working fluids are organic mixtures:R245fa/DMAC and R236fa/DMAC,chosen for their low Global Warming Potential.The main objective is the optimization of energy efficiency in order to minimize the environmental impact through the implementation of a sustainable strategy.It is shown that Exergy Analysis itself is a valuable tool in energy integration.Within the imposed framework of minimizing total annual costs,entropy analysis can be instrumental in determining the optimal plant concept,optimizing energy conversion and use,and improving profitability.The present results are discussed under the optimistic hope that they may help to define new energy and environmental policies.

Utilization of Solar Energy in Irrigation Systems in Bangladesh

The demand for water pumping in urban water supply and irrigation in Bangladesh is significantly influenced by electricity deficits and high diesel costs. To address these challenges, the adoption of solar power for water pumping emerges as a viable alternative to traditional systems reliant on grid power and diesel. In recent years, there has been a growing emphasis on clean and renewable energies, aligning with the environmental and economic priorities of Bangladesh. The agricultural sector, serving as the backbone of the country’s economy, witnesses an escalating demand for water as the population increases. The extraction and transfer of water for agricultural and drinking purposes translate to high-energy consumption. Leveraging the abundant and essentially free solar energy, particularly during the crop growth periods when irrigation is crucial, presents an optimal solution. This study underscores the underutilization of this vital resource in Bangladesh and advocates for the widespread implementation of solar energy conversion programs, specifically in photovoltaic pumping systems. By comparing these systems with conventional diesel pumps, this paper aims to inspire policymakers, statesmen, and industry professionals to integrate green energy into the water sector. The envisioned outcome is a strategic shift towards sustainable development, with a focus on harnessing solar power to pump water for villages and agriculture, thus contributing to economic and environmental sustainability.

Baseline of the Use of Solar Irrigation Pump in the Niayes Area in Senegal

Solar irrigation pumps are considered as an alternative to the use of diesel and electric pumps due to the high cost of energy. These pumps are now increasingly used in the Niayes area. Thus, a more in-depth knowledge about the components of a solar pumping system and their characteristics available on the market as well as prices can be beneficial. This study was conducted to have an idea on the baseline of the use of solar irrigation pumps in this area. To perform this study, surveys were conducted among 12 suppliers and 10 service providers located in Dakar, Thies, Louga and Saint-Louis region and among 53 users located in Potou area which is in Louga region. Results show a wide range of pump brands and characteristics. Brands found were Lorentz, LIKOU, SHIMGE, Grundfos, Solar pump, Feili, Difful, JUQIANG, Solar tech, and Asaman. The pumps’ flow rate varies between 2.5 m3/h and 45 m3/h, the pressure ranges from 15 m to 160 m and the power is between 0.072 kW and 10 kW. The price of these pumps varies depending on the brand used and their characteristics. In addition, other materials are available, such as panels with power ranging from 80 W to 330 W and electric cables. The price of these components varies according on the type used. Thus, the investment cost for implementation varies between 640 euros (420,000 CFA) and 25,087 euros (16,455,919 CFA). The cost of installation varies between 76.3 euros (50,000 CFA) and 1219.6 euros (800,000 CFA). Concerning maintenance, it is generally free during the warranty period when the equipment is supplied and installed by the same company. However, the cost of maintenance varies between 152.5 euros and 457.4 euros/year or is estimated at 45.7 euro/maintenance after the warranty years. Investigations conducted among users show that farmers in general do not perform pump maintenance due to a lack of knowledge and financial means. Thus, according to farmers, factors that impact pumps operation are the low sunshine that occurs between December and January and the iron in the water and low well discharge.

Efficiency of Combined Solar Thermal Heat Pump Systems

In this project, different combinations of solar energy and heat pump systems for preparation of DHW （domestic hot water） and space heating of buildings are analyzed through dynamic system simulations in TRNSYS （Transient System Simulation Program）. In such systems, solar thermal energy can be used, on one hand, directly to charge the buffer storage and, on the other hand, as heat source for the evaporator oftbe HP （heat pump）. In this work systems, in which solar heat is only used directly （parallel operation of solar and HP）, systems using the collectors also as a heat source for the HP are analyzed and compared to conventional air HP systems. With a combined parallel solar thermal HP system, the system performance compared to a conventional HP system can be significantly increased. Unglazed selectively coated collectors as source for the HP have the advantage that the collector can be used as an air heat exchanger. If solar radiation is available and the collector is used as source for the HP, higher temperatures at the evaporator of the HP can be achieved than with a conventional air HP system.

Design,simulation of different configurations and life-cycle cost analysis of solar photovoltaic-water-pumping system for agriculture applications:use cases and implementation issues

Water is an essential resource for agriculture and the majority of land is irrigated through borewells or wells.The power requirement for an irrigation pump motor is fed by the on-grid power supply but the availability of electricity in rural areas is still questionable.With rising concerns about global warming and the rise in carbon footprints,it is necessary to choose clean and green energy,thereby attaining self-sustainable life.India receives yearly a mean solar irradiation of 6.5 kWh/m^(2)day.Hence,a solar photovoltaic-water-pumping system(SPV-WPS)is a suitable alternative to grid energy;thereby,the farmers would generate electricity through the solar photovoltaic system and become self-sufficient in their energy needs.In this paper,two different agricultural fields in Tamil Nadu,India that deploy flood irrigation and drip irrigation are taken as a case study.The paper discusses the concerns on the use of grid power and their carbon footprint,design and simulation of 4-and 5.5-kW SPV-WPSs using PVsyst 7.1.1,and the advantages of using SPV-WPSs and life-cycle cost analysis on different use cases.The Government of India has introduced a special scheme to promote the installation of SPV-WPSs by offering attractive incentives through PM-Kisan Urja Suraksha evam Utthaan Mahabhiyan(KUSUM)yojana.The results of the case study show that with the use of SPV-WPSs,either with or without subsidy,the farmer could gain a minimum of 250%on the investment with a project lifetime of 25 years.