Vertically aligned montmorillonite aerogel-encapsulated polyethylene glycol with directional heat transfer paths for efficient solar thermal energy harvesting and storage

The conversion and storage of photothermal energy using phase change materials(PCMs)represent an optimal approach for harnessing clean and sustainable solar energy.Herein,we encapsulated polyethylene glycol(PEG)in montmorillonite aerogels(3D-Mt)through vacuum impregnation to prepare 3D-Mt/PEG composite PCMs.When used as a support matrix,3D-Mt can effectively prevent PEG leakage and act as a flame-retardant barrier to reduce the flammability of PEG.Simultaneously,3D-Mt/PEG demonstrates outstanding shape retention,increased thermal energy storage density,and commendable thermal and chemical stability.The phase transition enthalpy of 3D-Mt/PEG can reach 167.53 J/g and remains stable even after 50 heating-cooling cycles.Furthermore,the vertical sheet-like structure of 3D-Mt establishes directional heat transport channels,facilitating efficient phonon transfer.This configuration results in highly anisotropic thermal conductivities that ensure swift thermal responses and efficient heat conduction.This study addresses the shortcomings of PCMs,including the issues of leakage and inadequate flame retardancy.It achieves the development and design of 3D-Mt/PEG with ultrahigh strength,superior flame retardancy,and directional heat transfer.Therefore,this work offers a design strategy for the preparation of high-performance composite PCMs.The 3D-Mt/PEG with vertically aligned and well-ordered array structure developed in this research shows great potential for thermal management and photothermal conversion applications.

In-Situ Preparation and Thermal Shock Resistance of Mullite-Cordierite Heat Tube Material for Solar Thermal Power

In order to improve the thermal shock resistance of solar thermal heat transfer tube material, the mullite-cordierite composite ceramic as solar thermal heat transfer tube material were fabricated by pressureless sintering using a-Al203, Suzhou kaolin, talc, and feldspar as starting materials. The important parameter for solar thermal transfer tube such as water absorption （W）, bulk density （Db）, and the mechanical properties were investigated. The phase composition and microstructure of the composite ceramics were analyzed by XRD and SEM. The experimental results show that the B3 sintered at 1 300 ℃ and holding for 3 h has an optimum thermal shock resistance. The bending strength loss rate of B3 is only 2% at 1 100℃ by air quenching-strength test and the sample can endure 30 times thermal shock cycling, and the water absorption, the bulk density and the bending strength are 0.32%, 2.58 g·cm-3, and 125.59 MPa respectively. The XRD analysis indicated that the phase compositions of the sample were mullite, cordierite, corundum, and spinel. The SEM images illustrate that the cordierite is prismatic grain and the mullite is nano rod, showing a good thermal shock resistance for composite ceramics as potential solar thermal power material.

Thermodynamic analysis of mixed and dry reforming of methane for solar thermal applications

Thermodynamic analysis of the reforming of methane with carbon dioxide alone （＂dry reforming＂） and with carbon dioxide and steam together （＂mixed reforming＂） is performed as part of a project which investigates the suitability of these endothermic reactions for the storage of solar thermal energy. The Gibbs free energy minimization method was employed to identify thermodynamically optimal operating conditions for dry reforming as well as mixed reforming with a desired H2/CO molar ratio of 2. The non-stoichiometric equilibrium model was developed using FactSage software to conduct the thermodynamic calculations for carbon formation, H2/CO ratio, CH4 conversion and H2 yield as a function of reaction temperature, pressure and reactant molar ratios. Thermodynamic calculations demonstrate that in the mixed reforming process, optimal operating conditions in a carbon-free zone are under H2O/CH4 /CO2 =1.0/1.0/0.5, p = 1 to 10 bar and T = 800 to 850℃ for the production of syngas with a H2 /CO molar ratio of 2. Under the optimal conditions, the maximum H2 yield of 88.0% is achieved at 1 bar and 850℃ with a maximum CH4 conversion of 99.3%. In the dry reforming process, a carbon formation regime is always present at a CO2/CH4 molar ratio of 1 for T = 700 1000℃ and p = 1-30 bar, whereas a carbon-free regime can be obtained at a CO2/CH4 molar ratio greater than 1.5 and T≥800℃.

Effect of Nano-ZrO_2 on Microstructure and Thermal Shock Behaviour of Al_2O_3/SiC Composite Ceramics Used in Solar Thermal Power

The Al2O3-ZrO2（3Y）-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of samples with 10vol% nano-ZrO2 sintered at 1480℃ were 3.222 g/cm3 and 160.4MPa,respectively.The bending strength of samples after 7 times thermal shock tests （quenching from 1000℃ to 25℃ in air medium） is 132.0MPa,loss rate of bending strength is only 17%.The effect of nano-ZrO2 content on the microstructure and performance of Al2O3-ZrO2（3Y）-SiC composite ceramic was investigated.The experimental results show that the bending strength of samples with above 10vol% nano-ZrO2 content has decreased,because the volume expansion resulting from t-ZrO2 to m-ZrO2 phase transformation is excessive;Adding proper nano-ZrO2 would be contributed to improve the thermal shock resistance of the composite ceramics.The Al2O3-ZrO2（3Y）-SiC composite ceramic has promising potential application in solar thermal power.

Solar thermochemical reactions Ⅱ:Synthesis of 2-aminothiophenes via Gewald reaction induced by solar thermal energy

Green conditions have been developed for the synthesis of substituted 2-aminothiophenes employing multicomponent reactions of a ketone with active methylene nitrile and elemental sulphur induced by free solar thermal energy.

Preparation and Characterization of Andalusite Ceramic Used for Solar Thermal Power Generation

High-temperature thermal storage material is one of the critical materials of solar thermal power generation system. Andalusite, kaolin, talc, γ-Al2O3 and partially stabilized zireonia were used as the raw materials, and in-situ synthesis of cordierite was adopted to fabricate thermal storage material for solar thermal power generation via pressureless sintering. The phase compositions, microstructures and thermal shock resistances of the sintered samples were analyzed by XRD, SEM and EDS, and the corresponding mechanical properties were measured. The results show that the major phases of the samples are mullite and zirconium silicate, and the pores distribute uniformly. After being sintered at 1 460℃C, A4 sample exhibits a better mechanical performance and thermal shock resistance, its loss rate of bending strength after 30 cycles thermal shock is 3.04%, the bulk density and bending strength are 2.86 g.cm^-3 and 139.66 MPa, respectively. The better thermal shock resistance of the sample is closely related to the effect of zirconium silicate, such as its uniform distribution, nested growth with mullite, low thermal expansion coefficient, high thermal conductivity, etc. This ceramic can be widely used as one of potential thermal storage materials of solar thermal power generation system.

Solar thermochemical reactionsⅢ:A convenient one-pot synthesis of 1,2,4,5-tetrasubstituted imidazoles catalyzed by high surface area SiO_2 and induced by solar thermal energy

A simple, convenient and efficient method for the synthesis of 1,2,4,5-tetrasubstituted imidazole derivatives using benzoin, an aromatic aldehyde, an aromatic amine in the presence of ammonium acetate catalyzed by high surface area SiO2 and induced by free solar thermal energy was reported. C 2009 Kamal User Sadek. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Development of Cu foam-based Ni catalyst for solar thermal reforming of methane with carbon dioxide

Using solar energy to produce syngas via the endothermic reforming of methane has been extensively inves- tigated at the laboratory- and pilot plant-scales as a promising method of storing solar energy. One of the challenges to scaling up this process in a tubular reformer is to improve the reactor＇s performance, which is limited by mass and heat transfer issues. High thermal conductivity Cu foam was therefore used as a sub-strate to improve the catalyst＇s thermal conductivity during solar reforming. We also developed a method to coat the foam with the catalytically active component NiMg3AlOx. The Cu foam-based NiMg3AlOx performs better than catalysts supported on SiSiC foam, which is currently used as a substrate for solar-reforming cat- alysts, at high gas hourly space velocity （≥400,000 mL/（g.h）） or at low reaction temperatures （≤ 720 ℃）. The presence of a γ-Al2O3 intermediate layer improves the adhesion between the catalyst and substrate as well as the catalytic activity.

Azobenzene‑Based Solar Thermal Fuels:A Review

The energy storage mechanism of azobenzene is based on the transformation of molecular cis and trans isomerization,while NBD/QC,DHA/VHF,and fulvalene dimetal complexes realize the energy storage function by changing the molecular structure.Acting as“molecular batteries,”they can exhibit excellent charging and discharging behavior by converting between trans and cis isomers or changing molecular structure upon absorption of ultraviolet light.Key properties determining the performance of STFs are stored energy,energy density,half-life,and solar energy conversion efficiency.This review is aiming to provide a comprehensive and authoritative overview on the recent advancements of azobenzene molecular photoswitch system in STFs fields,including derivatives and carbon nano-templates,which is emphasized for its attractive performance.Although the energy storage performance of Azo-STFs has already reached the level of commercial lithium batteries,the cycling capability and controllable release of energy still need to be further explored.For this,some potential solutions to the cycle performance are proposed,and the methods of azobenzene controllable energy release are summarized.Moreover,energy stored by STFs can be released in the form of mechanical energy,which in turn can also promote the release of thermal energy from STFs,implying that there could be a relationship between mechanical and thermal energy in Azo-STFs,providing a potential direction for further research on Azo-STFs.

Proposal of a Solar Thermal Power Plant at Low Temperature Using Solar Thermal Collectors

To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surface solar collectors, so working at low temperature (i.e., below 100°C). This power plant is aimed at warm countries, i.e., the ones mainly located between -40° and 40° latitude, having available space along their coast. This land based plant, to install on the seashore, is technologically similar to the one used for OTEC (Ocean Thermal Energy Conversion). This plant, apart from supplying electricity with a much better thermodynamic efficiency than OTEC plants, has the main advantage of providing desalinated water for drinking and irrigation. This plant is designed to generate electricity (and desalinated water) night and day and all year round, by means of hot water storage, with just a variation of the power delivered depending on the season.

Optimisation of Electrical Distribution System by Using Solar Thermal Powered Systems and Its Impact on Electrical Distribution Feeders

In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.

Modelling of Solar Thermal Power Plant Using Parabolic Trough Collector

The target of the National Solar Mission is to build up India as a worldwide pioneer in solar energy generation. Solar power can be transmitted through grid either from solar photovoltaic or solar thermal technology. As compared to solar photovoltaic, solar thermal installations are less studied, especially regarding energy estimation and performance analysis. For estimating the potential of CSP plants, it is planned to simulate a power plant. We have marginally modified the design of 1 MW operational power plant installed at Gurgaon using Parabolic Trough Collector (PTC) technology. The results are compared with the expected output of Gurgaon power plant and also 50 MW power plant at Rajasthan. Our results have closely matched with a small deviation of 3.1% and 3.6% for Gurgaon and Rajasthan plants, respectively. Our developed model is also validated with 18 different solar power plants in different parts of the world by slightly modifying the parameters according to the plant capacity without changing major changes to the plant design. Difference between our results and the expected energy generation varied from 0.4% to 13.7% with an average deviation of 6.8%. As our results show less than 10% deviation as compared to the actual generation, an attempt has been made here to estimate the potential for the entire nation. For this modelling has been carried out for every grid station of 0.25° × 0.25° interval in India. Our results show that annual solar thermal power plant of 1 MWe capacity potential varies from 900 to 2700 MWh. We have also compared our results with previous studies and discussed.

Contrastive Observation of Solar Thermal and Photovoltaic Resource

Solar thermal and photovoltaic applications are the most w idely used and the most successful w ay of commercial development in solar energy applications. Observation and assessment of solar thermal and photovoltaic resources are the basis and key of their large-scale development and utilization. Using the observational data carried out from Beijing southern suburbs observation station of China M eteorological Administration in summer of 2009,preliminary solar thermal and photovoltaic resources characteristics for different w eather conditions,different angle and different directions are analyzed. The results show that:(1) In sunny,cloudy or rainy w eather conditions,both of solar thermal and photovoltaic sensors daily irradiance have consistent change in trend. Solar thermal irradiance is larger than photovoltaic. Under sunny conditions,solar thermal global radiation has about 2.7%higher than the photovoltaic global radiation. Under cloudy w eather conditions,solar thermal global radiation has about 3. 9%higher than the photovoltaic. Under rainy w eather conditions,solar thermal global radiation has about 20% higher than the photovoltaic.(2) For different inclined plane daily global radiation,southern latitude-15 °incline is the maximum and southern vertical surface is the minimum. The order from large to small is southern latitude-15 ° incline,southern latitude incline,southern latitude+15 °incline,horizontal surface and southern vertical surface. Southern latitude-15 °incline global radiation has about 41% higher than the southern vertical surface.(3) For different orientation vertical surface daily global radiation,southern vertical surface is the maximum and w estern vertical surface is the minimum,w hich eastern vertical surface is in the middle. Southern vertical surface global radiation has about 20% higher than the w estern vertical surface.

Preparation and Thermal Shock Resistance of Mullite and Corundum Co-bonded SiC Ceramics for Solar Thermal Storage

Mullite and corundum co-bonded SiC-based composite ceramics(SiC-mullite-Al2O3)were prepared by using SiC,calcined bauxite and kaolin via pressureless carbon-buried sintering.The low-cost SiC-based composite ceramics designed in this study are expected to be used as thermal storage materials in solar thermal power generation based on the high density and excellent thermal shock resistance.The influences of calcined bauxite addition and sintering temperature on the microstructures,phase compositions,and physical properties of the samples were investigated.Results demonstrated that the introduction of calcined bauxite containing two bonding phases greatly reduced the lowest sintering temperature to 1400℃.The SiC-mullite Al2O3 composite with 40 wt%calcined bauxite sintered at 1500℃exhibited optimum performance.The density and bending strength were 2.27 g·cm^-3 and 77.05 MPa.The bending strength increased by 24.58%and no cracks were observed after 30 thermal shock cycles,while general clay would reduce the thermal shock resistance of SiC.The SiC-mullite-Al2O3 composites with satisfied performance are expected to be used as thermal storage materials in solar thermal power generation systems.

Full scale experimental study of a small natural draft dry cooling tower for concentrating solar thermal power plant

Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid area,natural draft dry cooling tower is a promising choice.To develop the experimental studies on small cooling tower,a 20 m high natural draft dry cooling tower with fully instrumented measurement system was established by the Queensland Geothermal Energy Centre of Excellence.The performance of this cooling tower was measured with the constant heat input of 600 kW and 840 kW and with ambient temperature ranging from 20 ℃ to 32 ℃.The cooling tower numerical model was refined and validated with the experimental data.The model of 1 MW concentrating solar thermal supercritical CO2 power cycle was developed and integrated with the cooling tower model.The influences of changing ambient temperature and the performance of the cooling tower on efficiency of the power system were simulated.The differences of the mechanism of the ambient temperature effect on Rankine cycle and supercritical CO2 Brayton cycle were analysed and discussed.

Solar Thermal Energy Generation Potential in Gujarat and Tamil Nadu States, India

Government of India has come out with an ambitious target of 100 GW of using solar energy alone by the year 2022. To reach this target, innovative ideas are required to use the solar energy more effectively. For solar electricity generation, mainly two types of technologies are presently in use, namely, solar PV and solar thermal. Being a tropical country, India has large solar PV and solar thermal energy. More research is required on economic aspects to make the solar thermal competitive to solar PV. Towards this direction, in our present study we have simulated a solar thermal power plant using Parabolic Trough Collector (PTC) technology and normalized with 1 MW solar thermal power plant at Gurgaon near New Delhi. Through simulation, we have extended our study and computed the electricity generation possible at different locations of India. For this purpose with 1? × 1?spacing, computations have been carried out at 296 locations. The work is further extended for more detailed study at two representative states, namely, Gujarat and Tamil Nadu. In these two states, closer data points with 0.25? × 0.25? spacing have been considered at 273 locations for Gujarat and 197 locations for Tamil Nadu. Our results indicate a large potential of electricity generation using solar thermal energy in southern states of India, namely, Tamil Nadu, Karnataka, Kerala, southern and western part of Andhra Pradesh and eastern part of Maharashtra. Good potential has also been observed in eastern parts of Gujarat and parts of Madhya Pradesh and eastern part of Rajasthan. The annual potential ranges from 1800 MWh to as much as 2600 MWh. Major parts of northern states, for example Uttar Pradesh, Bihar, West Bengal, Punjab, Jammu and Kashmir have medium range potential. Here, the annual potential ranges from 1000 to 1500 MWh. Poor range of potential is observed towards eastern parts of India and north eastern states. Here, the electricity generation potential ranges from 600 to 1200 MWh. Our results are useful to solar thermal developer and decision managers.

Solar Thermal Application for the Dairy Industry in Taiwan

Taiwan has been developing clean energy and solar heating for hot water production is a mature technology. The subsidy program (2000-2016) for solar water heaters means that the cumulative area of solar collectors installed was approximately 2.52 million square meters at the end of 2016, in which more than 93% have been installed in the domestic sector. Industrial heat processes represent an area for solar thermal application. This study presents field measurements for solar water heaters installed for sterilization in dairy industry. Global solar radiation can be correlated with the system’s thermal efficiency reasonably well. As a pre-heating system, financial viability is validated.

Numerical Model and Performance Validation of a Small-Scale Concentrating Solar Thermal Power Plant in Louisiana

A simplified numerical model of a small-scale (25 - 100 kWe) parabolic concentrating solar power (CSP) plant is presented that can be utilized during the planning stages for a CSP plant, utilizing only simplified information that would be available at the preliminary stages of a project. This is important because existing models currently used for planning purposes, such as the System Advisor Model (SAM) from the National Renewable Energy Laboratory (NREL), do not cover small-scale CSP plants. The model can be used to predict real-time performance, or it can be used with TMY data to estimate annual performance. The model was validated using performance data from an operating small-scale CSP power plant, which is a unique contribution of this work. The results showed that the model correlated well with actual operating measurements for all seasons of the year, and provided a useful tool for planning of future small-scale CSP plants.

Solar Thermochemical Reactions IV: Unusual Reaction of Nitrones with Acetonitrile Derivatives Induced by Solar Thermal Energy

The behaviour of cyanothioacetamide 1 and the acetonitrile derivatives 6 and 10, respectively, towards the nitrones 2a-i induced by free solar thermal energy is reported. Structures and reaction mechanisms are also discussed.