Solar light,seawater temperature,and nutrients,which one is more important in affecting phytoplankton growth?

Based on research results on the impacts of solar light,seawater temperature,and nutrient available to phytoplankton growth and changes in phytoplankton physiology and assemblage,we discussed the order of influence of these factors.By clarifying the mechanisms and processes of the impacts by these factors,we have determined the rising order of the importance as solar light,seawater temperature,and nutrient silicon (Si).Therefore,for human interests in sustaining economic development,the first thing to be considered is the input of nutrient Si into the ocean,followed by seawater temperature change.

In-situ decoration of metallic Bi on BiOBr with exposed(110)facets and surface oxygen vacancy for enhanced solar light photocatalytic degradation of gaseous n-hexane

Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is still rare.Here,a series of Bi/BiOBr composites were solvothermally synthe-sized and applied in solar-light-driven photocatalytic degradation of gaseous n-hexane.The charac-terization results revealed that both increasing number of functional groups of alcohol solvent(from methanol and ethylene glycol to glycerol)and solvothermal temperature(from 160 and 180to 200℃)facilitated the in-situ formation of metallic Bi nanospheres on BiOBr nanoplates withexposed(110)facets.Meanwhile,chemical bonding between Bi and BiOBr was observed on theseexposed facets that resulted in the formation of surface oxygen vacancy.Furthermore,the synergis-tic effect of optimum surface oxygen vacancy on exposed(110)facets led to a high visible light re-sponse,narrow band gap,great photocurrent,low recombination rate of the charge carriers,andstrong·O2-and h*formation,all of which resulted in the highest removal efficiency of 97.4%within120 min of 15 ppmv of n-hexane on Bi/BiOBr.Our findings efficiently broaden the application ofBi-based photocatalysis technology in the purification of gaseous straight-chain pollutants emittedby the petrochemical industry.

Morphology-Controlled Synthesis of ZnxCd1-xS Solid Solutions: An Efficient Solar Light Active Photocatalyst for the Degradation of 2,4,6-Trichlorophenol

ZnxCd1-xS solid solutions with controlled morphology have been successfully synthe-sized by a facile solution-phase method. The prepared samples were characterized by X-ray powder diffraction (XRD), UV-vis diffuse reflectance spectra, X-ray photoelec-tron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission elec-tron microscopy (TEM). The photocatalytic activity of ZnxCd1-xS was evaluated in the 2,4,6-trichlorophenol (TCP) degradation and mineralization in aqueous solution under direct solar light illumination. The experiment demonstrated that TCP was effectively degraded by more than 95% with 120 min. The results show that ZnS with Cd doping (ZnxCd1-xS) exhibits the much stronger visible light adsorption than that of pure ZnS, the light adsorption increasing as the Cd2+ doping amount. These results indicate that Cd doping into a ZnS crystal lattice can result in the shift of the valence band of ZnS to a positive direction. It may lead to its higher oxidative ability than pure ZnS, which is important for organic pollutant degradation under solar light irradiation. Further-more, the photocatalytic activity studies reveal that the prepared ZnxCd1-xS nanostructures exhibit an excellent photocatalytic performance, degrading rapidly the aqueous 2,4,6-trichlorophenol solution under solar light irradiation. These results sug-gest that ZnxCd1-xS nanostructure will be a promising candidate of photocatalyst working in solar light range.

Photocatalytic Treatment of Microcystin-LR-Containing Wastewater Using Pt/WO ₃Nanoparticles under Simulated Solar Light

This study investigates the photocatalytic degradation of microcystin-LR (MC-LR) under simulated solar light using Pt modified nano-sized tungsten trioxides (Pt/WO3). Photocatalytic activity was higher during the degradation of MC-LR with Pt/WO 3 than with pure WO 3 or Ti O2 . The catalyst loading greatly affect the degradation performance. The rate of degradation is influenced by the initial pH of the reaction solution. This study also investigates the photocatalytic inactivation of cyanobacteria. The results show that the algal growth was successfully controlled by the Pt/W O 3 . This study suggests Pt/W O 3 photocatalytic oxidation with solar light is a promising treatment for water containing MC-LR.

Operation strategy and energy-saving of the solar lighting/heating system through spectral splitting

The performance of a solar lighting and heating system(SLHS)based on the spectral splitting effect of nanofluids is presented in this paper.SLHS through nanofluids would split the sunlight spectrum into different wavelength,and then introduce the visible light into the offices for lighting and absorb infrared energy to generate hot water.The Energy Plus software was used to analyze the energy consumption of typical office building located in the city of Harbin in China coupled with SLHS.Based on the simulation results two lighting zones were identified in the offices and the optimal lighting control strategy was developed for a full year.The performance models of SLHS with different light-receiving areas of 10 m^(2)and 40 m^(2)were simulated and validated using the existing experimental data.The overall energy-saving of the offices over a full year were analyzed using the validated model.Results demonstrated that for SLHS with the area of 40 m^(2),the rate of the energy saving in the offices due to lighting and hot water systems were 58.9%,and 19.3%,respectively.The system also had the additional benefit of reducing the cooling load of the air conditioning system during summer period together with improving the quality of the indoor environment resulting in better health and productivity of the occupants.

Proteomic Alterations in Human Dermal Fibroblasts under Photo-Induced Pollution Caused by Excessive Solar Irradiations such as Infra-Red, Blue Light, UVA and UVB

Background: The skin serves as the first line of defense for the human body. Direct sunlight contains damaging radiations that can speed up the ageing process of the skin, resulting in wrinkles, leathery skin, dark patches, and solar elastosis. Objectives: To evaluate the effect of multiple solar irradiation related factors at the protein level in human dermal fibroblast (HDF). The overall effect of individual solar irradiations such as Infrared A (IRA), blue light (BL), UVA, and UVB on HDF cells and the extent of molecular level aberrations to be assessed and compared against each. Methods: Label-free quantitative proteomics (MS/MS) approach has been adopted in this study to observe the protein level changes induced in the HDF cells through various exposures of full light sources. Following that, downstream insilico analysis has been carried out. Results: In this study, it is demonstrated all the four different solar irradiations significantly contribute to the molecular degeneration of skin cells through various mechanisms. This study confirms that BL down-regulates DNA repair proteins and the skin cells-HDF stimulate the histone proteins as a response mechanism to maintain the chromosomal integrity. Conclusions: The proteomics experiment carried out in the current study intends to support the future sun care products based on full light protection technology that can be custom designed to provide complete protection from the solar radiation. Similar technology could enhance the further investigations for deeper understanding of induction, mode of action, and prevention of skin damage from extensive solar irradiation.

Degradation of Reactive Yellow 86 with photo-Fenton process driven by solar light

The decolorization of Reactive Yellow 86 （RY 86）, one of reactive azo dyes, was investigated in the presence of Fenton reagent under solar light irradiation. The decolorization rate was strongly influenced by pH, initial concentrations of H202 and Fe（II）, and so on. An initial concentration of 40 mg/L was decolored more than 90% after 20 min under optimum conditions. The activation energy of the solar photo-Fenton reaction was 1.50 kJ/mol for RY 86 in the temperature range of 10-60℃. In the kinetic study, the rate constant of RY 86 with OH- radicals could be estimated to be 1.7 × 10^10 L/（mol.sec）. The decolorization efficiency of RY 86 under solar light irradiation was comparable to the artificial light irradiation. The decrease of TOC as a result of mineralization of RY 86 was observed during photo-Fenton process. The rate of RY 86 mineralization was about 83% under UV irradiation after 24 hr. The formation of chloride, sulfate, nitrate and ammonium ions as end-products was observed during the photocatalytic process. The decomposition of RY 86 gave two kinds of intermediate products. The degradation mechanism of RY 86 was proposed on the base of the identified intermediates.

Photocatalytic degradation of the diazo dye naphthol blue black in water using MWCNT/Gd,N,S-TiO_2 nanocomposites under simulated solar light

A simple sol-gel method was employed to prepare gadolinium, nitrogen and sulphur tridoped titania decorated on oxidised multiwalled carbon nanotubes（MWCNT/Gd,N,S-Ti O2）, using titanium（IV） butoxide and thiourea as titanium and nitrogen and sulphur source, respectively. Samples of varying gadolinium loadings（0.2%, 0.6%, 1.0% and3.0% Gd3＋） relative to titania were prepared to investigate the effect of gadolinium loading and the amounts of carbon nanotubes, nitrogen and sulphur were kept constant for all the samples. Furthermore, the prepared nanocomposites were evaluated for the degradation of naphthol blue black（NBB） in water under simulated solar light irradiation. Higher degradation efficiency（95.7%） was recorded for the MWCNT/Gd,N,S-Ti O2（0.6% Gd）nanocomposites. The higher photocatalytic activity is attributed to the combined effect of improved visible light absorption and charge separation due to the synergistic effect of Gd,MWCNTs, N, S and Ti O2. Total organic carbon（TOC） analysis revealed a higher degree of complete mineralisation of naphthol blue black（78.0% TOC removal） which minimises the possible formation of toxic degradation by-products such as the aromatic amines. The MWCNT/Gd,N,S-Ti O2（0.6% Gd） was fairly stable and could be re-used for five times,reaching a maximum degradation efficiency of 91.8% after the five cycles.

Removal of fluorescence and ultraviolet absorbance of dissolved organic matter in reclaimed water by solar light

Storing reclaimed water in lakes is a widely used method of accommodating changes in the consumption of reclaimed water during wastewater reclamation and reuse. Solar light serves as an important function in degrading pollutants during storage, and its effect on dissolved organic matter（DOM） was investigated in this study. Solar light significantly decreased the UV_（254） absorbance and fluorescence（FLU） intensity of reclaimed water.However, its effect on the dissolved organic carbon（DOC） value of reclaimed water was very limited. The decrease in the UV_（254） absorbance intensity and FLU excitation–emission matrix regional integration volume（FLU volume） of reclaimed water during solar light irradiation was fit with pseudo-first order reaction kinetics. The decrease of UV_（254） absorbance was much slower than that of the FLU volume. Ultraviolet light in solar light had a key role in decreasing the UV_（254） absorbance and FLU intensity during solar light irradiation. The light fluence-based removal kinetic constants of the UV_（254） and FLU intensity were independent of light intensity. The peaks of the UV_（254） absorbance and FLU intensity with an apparent molecular weight（AMW） of 100 Da to 2000 Da decreased after solar irradiation, whereas the DOC value of the major peaks did not significantly change.

ZnO nanopowders and their excellent solar light/UV photocatalytic activity on degradation of dye in wastewater

Low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O nanopowders(NPs)would determine their practical application in purifying wastewater.In this contribution,ZnO NPs were scalably synthesized via the simple reaction of Zn powder with H_2O vapor in autoclave.The structural,morphological and optical properties of the samples were systematically characterized by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectra,transmission electron microscopy,Micro-Raman,photoluminescence,and ultraviolet-visible spectroscopy.The as-prepared Zn O NPs are composed of nanoparticles with 100–150 nm in diameter,and have a small Brunauer-Emmett-Teller surface area of 6.85 m^2/g.The formation of Zn O nanoparticles is relative to the peeling of H_2 release.Furthermore,the product has big strain-stress leading to the red-shift in the band gap of product,and shows a strong green emission centered at 515 nm revealing enough atomic defects in Zn O NPs.As a comparison with P25,the obtained dust gray Zn O NPs have a strong absorbance in the region of 200–700 nm,suggesting the wide wave-band utilization in sunlight.Based on the traits above,the Zn O NPs show excellent photocatalytic activity on the degradation of rhodamine B(Rh-B)under solar light irradiation,close to that under UV irradiation.Importantly,the Zn O NPs could be well recycled in water due to the quick sedimentation in themselves in solution.The low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O NPs endow themselves with promising application in purifying wastewater.

Growth of Micropropagated Solanum tuberosum L.Plantlets under Artificial Solar Spectrum and Different Mono-and Polychromatic LED Lights

In agriculture,LED light sources have increasingly replaced the standard luminescent lamps and have acquired an important role in plant micropropagation.We studied the effect of different light sources such as narrow-band LEDs(bright blue,blue,green,yellow,deep red,and red)and wide-band LEDs(cold white,white,warm white,full spectrum,and an artificial solar spectrum sun box constructed by us)on development of potato plantlets in vitro.White luminescent lamps were used as a control.The light intensity of 49μmol·m^(-2)·s^(-1)was provided in all light treatments.We showed that the long-wave narrow-band light treatments were inapplicable for potato micropropagation,because plantlets were weak with small leaves,inhibited roots,and significantly elongated stems.Blue lights provided growth of shortened plantlets with large leaves,well-growing roots,and abundant green mass.The chlorophyll content was lower under blue and bright blue light and was at the same level in the remained treatments.Significant differences in the stomatal apparatus development were observed depending on the light source.These differences were not always reflected in the plantlet phenotype:e.g.,plantlets under blue and bright blue lights showed no differences in any characteristics except stomatal density and size of stomatal guard cells.We found no significant effect of blue light portion in the white lights and full spectrum on plantlet growth.An artificial solar spectrum sun box was the most suitable for potato micropropagation,because it supported the development of plantlets with good fitness,uniform internodes length,abundant roots and green mass accumulation.

Modeling and investigating the detailed characteristics of solar lighting/heating system based on spectrum split of nanofluids

Solar lighting technologies can lead sunlight into indoor actively,which has been proved that has great potential to reduce electric lighting consumption and create a healthy visual environment.In this paper,a mathematics model was developed to explore performance characteristics and economic applicability of solar lighting/heating system that combine ordinary solar lighting system with nanofluids to spectroscopically utilize sunlight.The results show that the luminous efficiency of output visible light can reach at 242 lm/W,which is 1.62-2.42 times higher than that of current LED light.Moreover,it can be found that the energy-saving capacity of this system is remarkable when used in most areas of China.As for Harbin,its annual total solar radiation ranges 4190 MJ/m^(2)to 5020 MJ/m^(2),the system’s annual output energy(per square meter of collection area)is 188.15 kW·h for daylighting and 248.2 kW•h for domestic hot water.Besides,the integrated using of infrared radiation can improve the economy of solar lighting technologies by calculating the comprehensive price of unit output energy.

Solar photocatalytic pathogenic disinfection:Fundamentals to state-of-the-art

It is necessary to treat pathogen-infected water before its utilisation.Of conventionally used treatment methods,solar photocatalysis has gained considerable momentum owing to its operational simplicity and capacity to use freely and abundantly available solar energy.This article systematically reviewed the disinfection of water with photocatalysis.It addressed the concerns of microbial infection of water and the fundamentals behind its treatment with photocatalysis.It presented an in-depth description of pathogenic deactivation with powerful reactive oxygen species.Special emphasis was given to process intensification as it is an attractive technique that provides multifunctionality and/or equipment miniaturisation.Solar reactor design regarding mobilised/immobilised photocatalysts and compound parabolic concentrators were elucidated.Finally,key parameters governing photoperformance,corresponding trade-offs,and the need for their optimisation were discussed.Overall,this article is a single point of reference for researchers,environmentalists,and industrialists who address the ever-severing challenge of providing clean water whilst also maintaining energy sustainability.

Photocatalytic degradation of formaldehyde by diffuser of solar light pipe coated with nanometer titanium dioxide thin films

The even and transparent nanometer TiO2 thin films named DegussaP25 as photocatalysis deposited on the surface of diffusers of solar light pipe were prepared by sol-gel processing.The rugged side of the diffusers of solar light pipe was coated evenly with DegussaP25 solution for the quality of 1.75 g.The experiments had showed that when the coated side was away from the sun the lighting degree may be reduced compared with that facing the sun.The average reduction was only 3.03%,which would not have a significant impact on lighting.Diffusers are important parts of a light pipe which can diffuse light evenly to the place needed to be illuminated.The experiments showed that in a sunny summer day under the direct sunlight,the solar light pipe combined with photocatalysis could reduce the formaldehyde volume fraction in a box of 0.1 m3 from 1.0×10-6 to 0.16×10-6.After 1 h of photodegradation the formaldehyde volume changed from 1.0×10-6 down to 0.1×10-6 with faster and more complete degradation of formaldehyde.The rate of degradation under cloudy and partly cloudy conditions was slower than that under sunny conditions.It was slower in winter than in summer under sunny conditions.The experimental results also showed that the performance of photocatalysis combined with diffusers of light pipe had better effect in a small space.The performance in large space,such as open space,will be the next work in the future,which will be a great challenge.

Effects of Light and Temperature on Uptake andDistribution of Nitrogen, Phosphorus and Potassiumof Cucumber in Solar Greenhouse

The influence of light and temperature conditions inside solar greenhouse of winter-spring and autumn-winter crop in northern China on uptake and distribution of nitrogen. phosphorus and potassium of cucumber was studied. The results showed that plant root development and uptake and distribution of N, P and K benefited more from inside light and temperature changes in winter-spring crop. Root volume and root activity increased more rapidly in winter-spring than in autumn-winter. Uptake of total N, P2O5 and K2O increased with plant development in winter-spring, and declined in autumn-winter crop. Distribution of total N, P2O5 and K2O at different part of cucumber at fruit bearing stage was significantly influenced by inside light and temperature of solar greenhouse. Total N, P2O5 and K2O were mainly distributed to leaves and stems at early stage, and increasingly to fruits after fruit bearing.

Solar energy conversion on g-C3N4 photocatalyst:Light harvesting,charge separation,and surface kinetics

Photocatalysis. which utilizes solar energy to trigger chemical reactions, is one of the most desirable solar-energy-conversion approaches. Graphitic carbon nitride （g-C3N4）. as an attractive metal-free photocatalyst, has drawn worldwide research interest in the area of solar energy conversion due to its easy synthesis, earth-abundant nature, physicochemical stability and visible-light-responsive properties. Over the past ten years, g-C3N4 based photocatalysts have experienced intensive exploration, and great progress has been achieved. However, the solar conversion efficiency is still far from industrial applications due to the wide bandgap, severe charge recombination, and lack of surface active sites. Many strategies have been proposed to enhance the light absorption, reduce the recombination of charge carriers and accelerate the surface kinetics. This work makes a crucial review about the main contributions of various strategies to the light harvesting, charge separation and surface kinetics of g-C3N4 photocatalyst. Furthermore, the evaluation measurements for the enhanced light harvesting, reduced charge recombination and accelerated surface kinetics will be discussed. In addition, this review proposes future trends to enhance the photocatalytic performance of g-C3N4 photocatalyst for the solar energy conversion.

Light Enhancement of Solar Module

This paper presents sputtered-deposited Ag nanoparticles (NPs) on the encapsulant material (ethylene vinyl acetate, EVA) with the variation of annealing condition on crystalline silicon solar cell to enhance the light intensity, and a conventional solar cell is also performed for comparison. It was found that an increase in the transmittance at the wavelength of 500 - 800 nm was detected in the Ag nanoparticle solar cells. And red-light enhancement of around 2% was measured in the Ag-sputtered solar module under annealing condition of 700℃ for 3 min from incident photon to converted electron (IPCE) profile. The photovoltaic performance of solar modules was characterized by a flasher system in AAA class (temporal instability, spectral match, and irradiance non-uniformity). The IV curve showed a current enhancement with Ag-EVA sample, and thus a high power output around 0.250 W was observed. A high fill factor of 73.63% also implied a high performance in series and shunt resistance. Surface plasmonic resonance effects of Ag nanoparticles deposited on the surface of solar cell were examined and discussed. This paper not only illustrated the performance of the surface plasmonic resonance of a solar device but also verified the application in the industrial production.

Impact of the light intensity variation on the performance of solar cell constructed from (Muscovite/TiO₂/Dye/Al)

In this work, the influence of the light intensity as one of the parameters that control the solar cell is studied. The effect of the other main variables, such as temperature, rotation per Minuit of the spin coating instrument, and the samples concentration, was found to be in conformity with other results, but unfortunately the intensity of light does not increase the solar cell efficiency, and fill factor, by other words it was found to play only a secondary role.

Light Soaking Induced Increase in Conversion Efficiency in Solar Cells Based on In(OH)_xS_y/Pb(OH)_xS_y

Light soaking characterization on complete SnO2:F/TiO2/In(OH)xSy/Pb(OH)xSy/PEDOT:PSS/Au, eta solar cell structure as well as on devices which do not include one or both TiO2 and/or PEDOT:PSS layers has been conducted. Additionally, studies of SnO2:F/In(OH)xSy/Pb(OH)xSy/PEDOT:PSS/Au solar cell have been performed. The power conversion efficiency and the short circuit current density have been found to increase with light soaking duration by a factor of about 1.6 - 2.7 and 2.1 - 3, respectively. The increase in these two parameters has been attributed to the filling up of trap states and/or charge-discharge of deep levels found in In(OH)xSy. These effects take place at almost fill factor and open circuit voltage being unaffected by the light soaking effects.

Light trapping characteristics of glass substrate with hemisphere pit arrays in thin film Si solar cells

In this paper, the light trapping characteristics of glass substrate with hemisphere pit （HP） arrays in thin film Si solar cells are theoretically studied via a numerical approach. It is found that the HP glass substrate has good antireflection properties. Its surface reflectance can be reduced by - 50% compared with planar glass. The HP arrays can make the unabsorbed light return to the absorbing layer of solar cells, and the ratio of second absorption approximately equals 30%. Thus, the glass substrate with the hemisphere pit arrays （HP glass） can effectively reduce the total reflectivity of a solar celt from 20% to 13%. The lip glass can also prolong the optical path length. The numerical results show that the total optical path length of the thin film Si solar cell covered with the HP glass increases from 2ω to 409. These results are basically consistent with the experimental results.